Homepage | Collection | 繁体中文
Product
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
H3C
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
Contact Us


Company Name:Kino Technology Limited

Website:www.kino86.com

Address :Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China



Contact Person:kiki

Tel :+8613040881925 

E-mail:kiki@szkiki.com

Wechat:+8613040881925

Whatspp: +8613040881925

Teams:kiki@szkiki.com





Products
 Product >> Cisco >> ALL
 
Product_Id:
71314323316
ProductName:
WS-C3650-48UQ-L
Specification:
Product Notes:
Product Category:
Cisco
 
   Product Description

Cisco Catalyst WS-C3650-48UQ-L Full English Product Description

1. Short Sales Title

Cisco WS-C3650-48UQ-L 1RU Stackable 48-Port UPOE Multi-Gigabit Pure Layer 2 Converged Wired/Wireless Access Switch, 48×Multi-Gigabit (100M/1/2.5/5/10G) Cisco UPOE Downlinks, 4 Dedicated 10G SFP+ Uplink Slots, LAN Base IOS XE Image, Single Modular 1100W AC Power Supply (660W Total UPOE Power Budget), Redundant Hot-Swap Variable-Speed Fan Trays, StackWise-160 160Gbps Stack Bus, Integrated Lightweight CAPWAP Wireless LAN Controller, Full Layer 2 Feature Suite Only, No Dynamic Layer 3 Routing Protocols, Max 255 VLANs, Cisco Limited Lifetime Hardware Warranty, End-of-Sale High-Density All Multi-Gig UPOE Stackable Switch for Large Flat Layer 2 Office, Higher Education Campus, High-Density Wi-Fi 6 / PTZ Camera Deployments Without Local Dynamic Routed Access Requirements

2. Official Product Overview

The Cisco Catalyst WS-C3650-48UQ-L belongs to the Catalyst 3650 unified wired-wireless stackable multilayer switch family, fully End-of-Sale (EOS Oct 31, 2021; End-of-Support Oct 31, 2026). Built on Cisco UADP Unified Access Data Plane ASIC and modular IOS XE operating system, this compact 1RU high-density all multi-gigabit UPOE chassis integrates full wire-speed Layer 2 switching and embedded lightweight CAPWAP wireless LAN controller hardware, removing the need for standalone wireless controllers in high-density flat campus and commercial network environments.
This model features 48 universal multi-gigabit RJ45 ports with full Cisco UPOE capability, delivering up to 60W power per port with a total usable 660W UPOE budget, powered by a factory pre-installed 1100W hot-swappable modular AC power supply. It is equipped with four fixed dedicated 10G SFP+ high-speed uplink ports for high-capacity fiber aggregation, and runs entry-level LAN Base IOS XE firmware. LAN Base delivers complete Layer 2 switching functions plus only static inter-VLAN routing, while all dynamic Layer 3 routing protocols, HSRP/VRRP gateway redundancy, 4094 VLAN support, full Flexible NetFlow and advanced multicast routing are disabled, reserved for IP Base and IP Services software tiers. It is purpose-built for mass deployment of Wi-Fi 6/6E high-power access points, PTZ surveillance cameras, digital signage, conference room thin clients and enterprise IP phones in large flat Layer 2 networks with no requirement for local dynamic inter-VLAN routing.

Model Suffix Breakdown

  • 3650: Unified access stackable switch platform with embedded wireless controller, StackWise-160 stacking, modular hot-swappable power/fan trays, UADP programmable forwarding ASIC
  • 48: Forty-eight front-panel universal multi-gigabit RJ45 downlink ports
  • U: Cisco UPOE power architecture, maximum 60W per port, total 660W PoE budget
  • Q: Four dedicated 10G SFP+ all-10G uplink slots
  • L: LAN Base IOS XE feature set (pure Layer 2 only, static inter-VLAN routing only, max 255 VLANs, all dynamic Layer 3 routing disabled)

Three IOS XE Feature Set Comparison for Catalyst 3650

  1. LAN Base (WS-C3650-48UQ-L): Complete Layer 2 feature set, static inter-VLAN routing only, maximum 255 VLANs, basic lightweight wireless AP management, all dynamic routing protocols disabled, no HSRP/VRRP gateway redundancy, restricted Flexible NetFlow Lite only.
  2. IP Base (WS-C3650-48UQ-S): All LAN Base features + Static / RIP / EIGRP stub / PIM stub routing, HSRP/VRRP first-hop redundancy, full unified wireless mobility controller, 4094 VLANs, complete Flexible NetFlow Lite, IPv6 stub dynamic routing, cross-stack Layer 3 routing replication.
  3. IP Services (WS-C3650-48UQ-E): All IP Base features + full multi-area OSPF, full EIGRP, BGPv4, full PIM sparse-dense multicast, complete end-to-end IPv6 dynamic routing (OSPFv3/EIGRPv6/BGPv6), Policy-Based Routing (PBR), WCCP v2 web cache redirection, DVMRP multicast tunneling, VRF-Lite multi-tenancy, full Flexible NetFlow v9, advanced WIDS/WIPS wireless security, TrustSec & MACsec support.

Stacking Architecture

  • StackWise-160 160Gbps full-duplex stacking bus: Up to nine Catalyst 3650 switches can be interconnected into a single logical stack under one unified IP management plane, supporting distributed wire-speed Layer 2 forwarding, cross-stack EtherChannel link aggregation, cross-stack RSPAN port mirroring, and cross-stack wireless AP policy replication. StackWise-160 stacking cables are sold separately as optional accessories.
  • Unified wireless stack domain: All CAPWAP wireless APs across the entire stack operate under a single consistent wireless policy domain with basic RF monitoring and rogue AP detection only, supporting up to 25 CAPWAP APs and 1000 concurrent wireless clients per stack.

Power & Port Hardware Design

Factory equipped with one modular 1100W hot-swappable AC power supply, delivering a total usable UPOE power budget of 660W to supply up to 60W Cisco UPOE power to every 48 multi-gigabit downlink port simultaneously. A second optional redundant 1100W AC power supply can be installed for N+1 power fault tolerance, with an external RPS2300 backup connector on the rear panel. Per-port PoE priority scheduling protects critical voice and wireless infrastructure during power budget shortages.
Rear uplink module contains four dedicated hot-swappable SFP+ 10G ports with 10G/1G auto-negotiation, compatible with 10GBASE-SR/LR/ER/ZR transceivers and backward interoperable with standard 1G SFP modules. All SFP/SFP+ transceivers support hot swap without full switch reboot for zero-touch fiber link upgrades. Dual redundant variable-speed hot-swap fan trays dynamically adjust fan RPM based on internal chassis temperature to minimize idle acoustic noise under light loads.
Front panel port layout: 48 universal multi-gigabit 10/100/1000/2500/5000/10000BASE-T RJ45 UPOE copper ports with dedicated per-port LEDs for link, activity, speed and PoE power status. Rear panel interfaces include RJ45 RS232 serial console, USB Type-A flash storage port, USB Type-B mini console, dedicated out-of-band 10/100 Fast Ethernet management port, dual StackWise-160 stacking connectors, dual power supply bays, and Kensington security lock. All copper ports support auto MDI-X and Energy-Efficient Ethernet (EEE).

3. Port & Hardware Specifications

  • Front Downlink Ports: 48 × Multi-Gigabit RJ45 auto-sensing (100M / 1G / 2.5G / 5G / 10G), auto MDI-X, Cisco UPOE (60W maximum per port)
  • Rear Fixed Uplinks: 4 × hot-swappable 10G SFP+ fiber slots (10G/1G auto-negotiation)
  • Local Management Interfaces: RJ45 serial console, USB Type-B mini console, USB Type-A flash storage, dedicated out-of-band 10/100 Fast Ethernet management port
  • Stack Interfaces: Dual StackWise-160 160Gbps stacking connectors
  • Power Supply: Single modular 1100W AC auto-ranging unit; optional second redundant 1100W AC PSU for N+1 redundancy; input 100–240V AC 50/60Hz; total available UPOE power budget 660W
  • Front Panel LEDs: Per-port link/activity/speed/PoE indicators; global system fault, power, stack member ID, wireless status LEDs
  • Mounting: Standard 19-inch 1RU rack-mount brackets included; wall-mount adapter optional, desktop rubber anti-slip feet supplied
  • Thermal Envelope: Dual redundant hot-swappable variable-speed fan trays; operating temperature 0°C ~ +45°C, storage -25°C ~ +70°C, relative humidity 10–85% non-condensing
  • Compliance Certifications: CE, FCC Class A, UL listed, VCCI Class A, RoHS compliant, NEBS Level 3 certified
  • Physical Dimensions: 445 mm (W) × 44.5 mm (H, 1RU) × 448 mm (D) / 17.5 × 1.75 × 17.6 inches
  • Unit Weight: 5.9 kg (13.0 lbs) with single 1100W power supply
  • Memory: 4 GB DRAM, 2 GB onboard flash memory for IOS XE universal images and configuration files
  • Switching Fabric: 392 Gbps full-duplex non-blocking stack-wide capacity
  • Forwarding Rate: 140 Mpps wire-speed Layer 2 forwarding for 64-byte packets
  • MAC Address Table: Up to 32,000 unicast MAC entries
  • VLAN Capacity: LAN Base hard limit 255 active IEEE 802.1Q tagged VLANs (VLAN ID range 1–4094)
  • Multicast Groups: 1024 IPv4 CGMP snooping groups (PIM multicast routing fully disabled under LAN Base)
  • Jumbo Frame Support: Up to 9000 bytes on all UPOE multi-gig downlinks and SFP+ uplink ports
  • Wireless Scale: Supports up to 25 CAPWAP wireless APs per standalone switch/stack, maximum 1000 concurrent wireless clients, 64 unique WLAN profiles, basic RF monitoring only
  • MTBF: 155,000 hours under standard office enterprise operating conditions
  • Warranty: Cisco Limited Lifetime Hardware Warranty: Next-business-day advance hardware replacement, 90-day complimentary Cisco TAC technical support

4. Layer 2 + LAN Base IOS XE Full Feature Set

Core Layer 2 Switching & Converged Wired-Wireless QoS Functions

  • Up to 255 IEEE 802.1Q tagged VLANs, VTPv3 dynamic VLAN synchronization, MSTP 802.1s multiple spanning tree
  • Dual trunk encapsulation: Cisco ISL trunk + IEEE 802.1Q standard trunk on all multi-gig copper and SFP+ fiber ports
  • Hierarchical IEEE 802.1p CoS / DSCP MQC QoS, 4 egress priority queues per port; Auto-QoS template optimized for VoIP and video traffic prioritization
  • Gigabit / 10G EtherChannel link aggregation (LACP / static PAgP), up to 8 bundled ports for uplink redundancy and cross-stack load balancing
  • Rapid STP (802.1w), UplinkFast, BackboneFast, BPDU Guard, Root Guard, UDLD to eliminate Layer 2 switching loops
  • Port security: Static MAC assignment, sticky dynamic MAC learning, configurable port shutdown violation actions
  • Per-port broadcast/multicast/unicast storm control to mitigate flooding DoS attacks
  • Local SPAN + cross-stack RSPAN port mirroring supported via StackWise-160 stacking
  • CGMP (Cisco Group Management Protocol) to reduce redundant multicast flooding across unified wired/wireless domains
  • Voice VLAN dedicated VoIP traffic segmentation, automated Auto QoS marking for UPOE IP voice endpoints
  • Cisco EnergyWise intelligent power management to lower idle stack and UPOE power consumption
  • RMON Groups 1,2,3,9 real-time traffic statistics monitoring
  • NTP time synchronization, CDP Cisco Discovery Protocol for end-to-end network device visibility
  • Embedded web-based Device Manager, Cisco Network Assistant zero-touch stack-wide provisioning
  • Basic IPv6 dual-stack Layer 2 switching: IPv6 Snooping, IPv6 ACL, IPv6 QoS marking, IPv6 neighbor discovery
  • Integrated Lightweight Unified Wireless Controller: CAPWAP AP termination, basic RF monitoring, rogue AP detection, unified wired/wireless Layer 2 policy enforcement
  • Flexible NetFlow Lite for limited traffic visibility (full Flexible NetFlow requires IP Base license upgrade)

LAN Base Layer 3 Routing Hard Limitations

  • Only static inter-VLAN routing supported; all dynamic Layer 3 routing protocols fully disabled: OSPF, full multi-area EIGRP, BGP inter-domain routing, PIM stub / full PIM sparse-dense multicast routing unavailable.
  • No HSRP / VRRP first-hop gateway redundancy protocols (requires IP Base license).
  • Limited IPv6 Layer 2 snooping only; no IPv6 dynamic routing suites (OSPFv3/EIGRPv6/BGPv6).
  • No policy-based routing (PBR), no WCCP web cache redirection, no DVMRP multicast tunneling.

Enterprise Security Feature Suite

  • IEEE 802.1X port-based NAC authentication with RADIUS/TACACS+ AAA remote access control (unified wired/wireless Layer 2 NAC enforcement only)
  • SSH v2 encrypted CLI management; SNMPv3 secure monitoring (fallback unencrypted Telnet/SNMPv1/v2c available)
  • Layer 2 ingress access control lists for granular inbound traffic filtering
  • Time-based ACL policy scheduling for restricted network access hours
  • Private VLAN edge isolation to separate host communication within the same broadcast domain
  • DHCP Snooping, Dynamic ARP Inspection (DAI), IP Source Guard to block IP/MAC spoofing attacks
  • Encrypted startup-config files, strong password encryption for local administrative credentials
  • Wireless baseline security suite: WPA2/WPA3 enterprise, 802.11r fast roaming, basic ISE identity services engine integration

5. Full Management Interfaces

  1. Local Out-of-Band: RJ45 serial console port for offline configuration without network connectivity
  2. Secure Remote CLI: SSH v2 encrypted command-line access; fallback unencrypted Telnet
  3. In-Band Management: Embedded web GUI, SNMP v1/v2c/v3, CDP Cisco Discovery Protocol, NTP time synchronization
  4. Auxiliary Interfaces: USB Type-A flash storage port for IOS XE image / config backup, dedicated out-of-band 10/100 Fast Ethernet management port
  5. Stack & Wireless Management: Single unified IP management plane for entire StackWise-160 stack; centralized AP inventory and basic RF management across all stack members

6. Integrated Security Mitigation Suite

  • Multi-level privilege CLI access with encrypted local user password storage
  • IEEE 802.1X port authentication to validate wired/wireless endpoints before granting LAN access
  • Port MAC address security to restrict unauthorized device connection
  • STP BPDU guard and root guard to block rogue switches from altering spanning-tree topology
  • Broadcast/multicast storm control to suppress flooding-based denial-of-service threats
  • Private VLAN edge to isolate peer hosts on the same access VLAN
  • DHCP Snooping + DAI ARP Inspection + IP Source Guard to eliminate address spoofing attacks
  • SSHv2 and SNMPv3 encryption to secure remote switch management traffic over the LAN
  • Manual permanent shutdown of unused RJ45/SFP+ ports to reduce unauthorized network attack vectors
  • Dedicated management VLAN isolation to segregate switch control plane traffic from end-user data traffic
  • Per-port PoE priority scheduling to protect critical voice/Wi-Fi devices during power budget shortages

7. Typical Deployment Scenarios

  1. Large Enterprise Pure Layer 2 All Multi-Gig UPOE Converged Access Switch: 48 universal multi-gig UPOE ports power bulk office IP phones, high-density Wi-Fi 6/6E wall-mounted APs and PTZ PoE surveillance cameras; four dedicated 10G SFP+ fiber uplinks deliver high-capacity core aggregation for multi-building flat campus networks. LAN Base flat Layer 2 feature set meets basic VLAN segmentation requirements without inter-VLAN dynamic routing, StackWise-160 stacking enables linear access-layer capacity expansion as office headcount grows.
  2. Large K-12 / Higher Education Campus Converged Wired-Wireless Network: Full UPOE multi-gig ports link classroom VoIP stacks, student multi-gig Wi-Fi APs and campus security camera arrays; 10G SFP+ uplinks connect to central school high-speed data center backbone. MSTP prevents broadcast loop failures across geographic VLAN domains, cost-efficient LAN Base firmware eliminates expensive IP Base/IP Services routing licenses for simple flat campus topologies.
  3. Large Regional Headquarters Wiring Closet Main Layer 2 Multilayer Switch: Universal multi-gig UPOE access ports connect multi-department desktop stacks, conference room high-density Wi-Fi APs and building-wide PoE surveillance systems; long-distance single-mode fiber 10G SFP+ uplink provides high-speed backhaul to corporate core distribution layer. LAN Base pure Layer 2 feature set satisfies flat-VLAN access demands for organizations that centralize all dynamic routing at the corporate core data center.
  4. Large Hotel / Shopping Mall / Healthcare Access Pod: Bulk multi-gig UPOE ports power lobby VoIP phones, high-concurrency guest Wi-Fi APs, POS terminals and continuous-recording PTZ security cameras; four 10G uplinks support heavy wireless user bandwidth loads, integrated lightweight wireless controller removes standalone WLC hardware cost for high AP density commercial venues.
  5. Legacy Catalyst 3750 Multi-Gig UPOE Access Network Refresh Hardware: Drop-in stackable 3650 replacement for older multi-gig PoE switches, fully compatible with enterprise fiber uplink infrastructure, adds integrated wireless controller, native all multi-gig downlinks and 10G uplinks plus modern IOS XE operating system for gradual migration to Catalyst 9300 unified access platforms without core router upgrades.

8. Standard Package Contents

1 × Cisco Catalyst WS-C3650-48UQ-L Multi-Gig UPOE Multilayer Switch (LAN Base IOS XE Image Preinstalled, single 1100W AC power supply factory pre-installed)
1 × AC power cord matching regional mains voltage standard
1 × RJ45-to-RS232 serial console rollover cable
1 × Standard 19-inch rack mounting bracket kit
Rubber anti-slip desktop stand feet
Hardware installation guide & Cisco IOS XE LAN Base configuration documentation
10G SFP+ fiber transceivers, StackWise-160 stacking cables, redundant second 1100W power supply, wall-mount adapter sold separately as optional accessories

Short Commercial Version (For Quotation & Product Catalog)

The Cisco Catalyst WS-C3650-48UQ-L is a legacy 1RU rack-mount variable-fan stackable pure Layer 2 managed all Multi-Gig UPOE high-density Gigabit converged wired/wireless access switch from the Catalyst 3650 Series, factory preloaded with LAN Base IOS XE firmware (no dynamic Layer 3 routing protocols, max 255 VLANs, 660W UPOE power budget supporting up to 60W per port on all 48 multi-gig ports). It features 48×100M/1/2.5/5/10G universal multi-gig Cisco UPOE auto-sensing RJ45 copper downlink ports plus four dedicated rear 10G SFP+ uplink slots, modular single 1100W AC power supply with optional redundant power, 160Gbps StackWise-160 stacking bus supporting up to 9 stacked units. It delivers a 392 Gbps non-blocking switching fabric, 140 Mpps Layer 2 forwarding rate, 32K MAC address table, multilayer DSCP MQC QoS, CGMP multicast snooping, Rapid STP, cross-stack EtherChannel/RSPAN, Cisco EnergyWise intelligent PoE management, Flexible NetFlow Lite, integrated lightweight wireless LAN controller, and enterprise security tools including 802.1X NAC authentication, SSHv2, DHCP Snooping and DAI. Cost-effective high-density all multi-gig UPOE pure Layer 2 stackable Gigabit converged voice/Wi-Fi/camera access switch for large enterprise flat-VLAN bulk office, large education campus and big regional headquarters high-bandwidth fiber hybrid LAN deployments requiring mass high-power PoE device support and basic Layer 2 wireless management without routed access functionality, End-of-Sale legacy Cisco unified access hardware covered by Cisco Limited Lifetime Warranty support only.
Click:36 Entry Time:2026-07-13 【Print】 【Close
 © 2026 Kino Technology Limited. All Rights Reserved. | Hong Kong Registered · Shenzhen Operation | New & Genuine Used Network Equipment Supplier 
Links:   白云搜搜   |   未来互联   |   百度   |  
Kino Technology Limited   网站技术支持:未来互联