Homepage | Collection | 繁体中文
Product
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
H3C
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
Contact Us


Company Name:Kino Technology Limited

Website:www.kino86.com

Address :Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China



Contact Person:kiki

Tel :+8613040881925 

E-mail:kiki@szkiki.com

Wechat:+8613040881925

Whatspp: +8613040881925

Teams:kiki@szkiki.com





Products
 Product >> Cisco >> ALL
 
Product_Id:
71016572616
ProductName:
WS-C3750X-24P-E
Specification:
Product Notes:
Product Category:
Cisco
 
   Product Description

Cisco Catalyst WS-C3750X-24P-E Full English Product Description

1. Short Sales Title

Cisco WS-C3750X-24P-E 1RU Stackable PoE+ Gigabit Layer 3 Access Switch, 24×10/100/1000BASE-T IEEE 802.3at PoE+ Downlinks, 1 Rear Modular Uplink Slot, IP Services IOS Image, Single Modular 715W AC Power, Redundant Hot-Swap Fan Tray, StackWise Plus 32Gbps Stack Bus, StackPower Power Pooling, Full Enterprise Layer 3 Routing Suite (OSPF/EIGRP/BGP/PIM Multicast / Full IPv4/IPv6 Dynamic Routing), HSRP/VRRP Gateway Redundancy, Advanced L2/L3 ACL, Auto-QoS for VoIP, CGMP Multicast Snooping, Standard Limited Lifetime Warranty, End-of-Sale Full-Feature Stackable PoE Gigabit Voice/Wi-Fi Access Switch for Medium/Large Enterprise, Multi-Building Campus, Large Regional Branch Distributed Stacked Edge Deployments Requiring Complete Dynamic IP Routing & Multicast Functionality

2. Official Product Overview

The Cisco Catalyst WS-C3750X-24P-E belongs to the Catalyst 3750X stackable Gigabit multilayer access switch series, fully End-of-Sale (EOS Oct 30, 2016; End-of-Support Oct 31, 2021)Cisco. It is the top-tier full-feature 24-port all-copper PoE+ stackable converged voice-data edge switch with complete hardware-accelerated CEF Layer 3 routing, built on the enhanced 3750X hardware platform featuring hardware MACsec encryption, modular redundant power/fan design, StackWise Plus stacking, and native StackPower power sharing (fully active under IP Services firmware). The suffix E stands for IP Services IOS image, delivering the complete enterprise Layer 2 feature set plus all advanced dynamic Layer 3 routing, multicast, and dual-stack IPv4/IPv6 capabilities unavailable on IP Base / LAN Base firmware variantsCisco.

Model Suffix Breakdown

  • 3750X: Enhanced 3750 Gigabit stackable multilayer platform, StackWise Plus 32Gbps full-duplex stacking bus, hardware MACsec encryption, modular hot-swap power/fan, StackPower power pooling
  • 24: Twenty-four front-panel 10/100/1000BASE-T full Gigabit copper downlink ports (IEEE 802.3at PoE+ enabled)
  • P: PoE+ port variant (30W per port IEEE 802.3at)
  • E: IP Services full enterprise multilayer IOS firmware (EMI Enhanced Multilayer Image)

Three IOS Feature Set Comparison

  1. LAN Base (WS-C3750X-24P-L): Pure Layer 2 only, limited static inter-VLAN routing, max 255 VLANs, no dynamic routing protocols, StackPower disabled, basic IPv6 stub Layer 2 switchingCisco.
  2. IP Base (WS-C3750X-24P-S): All LAN Base features + OSPF, EIGRP stub, PIM stub, HSRP/VRRP, full IPv6 stub routing, 1000 VLANs, native StackPower support, limited multicast stub onlyCisco.
  3. IP Services (WS-C3750X-24P-E): All IP Base features + full multi-area OSPF, full EIGRP, BGP inter-domain routing, full PIM sparse-dense multicast, full IPv6 dynamic routing (OSPFv3/EIGRPv6/BGPv6), policy-based routing (PBR), WCCP web cache redirection, DVMRP multicast tunneling, fallback bridging for non-IP inter-VLAN traffic, full advanced multicast suitesCisco.

Stacking Architecture

  • StackWise Plus 32Gbps full-duplex stacking bus: Up to 9 physical switches unified as a single logical stack with one global IP management plane, distributed wire-speed forwarding, cross-stack EtherChannel, cross-stack RSPAN port mirroring, cross-stack HSRP gateway redundancy, cross-stack multicast replication. Separate StackWise Plus stacking cables sold as optional accessoriesCisco.
  • StackPower: Shared power pooling across stack members for power load balancing and stack-wide power redundancy; fully functional natively under IP Services firmware (supports up to four power stack members in one power domain)Cisco.

Power & Port Hardware Design

Fixed built-in single modular 715W AC power supply (optional second redundant AC power supply for N+1 power backup, external RPS redundant power connector available). One rear interchangeable modular uplink bay supporting two uplink options: 4×SFP Gigabit or 2×SFP+ 10-Gigabit modules for flexible fiber or short-range copper aggregation expansion. Variable-speed front-to-back redundant hot-swap fan tray dynamically adjusts fan RPM based on internal temperature to reduce idle acoustic noise.
Front panel layout: 24 Gigabit RJ45 ports with per-port status LEDs for link/activity/speed/PoE delivery. Rear panel hosts RJ45 RS232 serial console port, dual StackWise Plus stacking connectors, modular uplink bay, dual StackPower power stacking ports, AC power input jack, external RPS backup connector, Kensington security lock, USB Type-A flash storage port, USB Type-B management console, out-of-band Fast Ethernet management port. All copper ports support auto MDI-X, full-duplex flow control; SFP/SFP+ transceivers support hot swap without full switch reboot for zero-touch uplink upgrades. Full IEEE 802.3at PoE+ power hardware integrated for IP phones, wireless APs, and high-power PoE surveillance camerasCISCO Russ....

3. Port & Hardware Specifications

  • Downlink Ports: 24 × 10/100/1000BASE-T RJ45 auto-sensing Gigabit copper, auto MDI-X, full-duplex, IEEE 802.3at PoE+ (30W per port max)
  • Rear Uplink Slot: 1 modular uplink bay (user-selectable 4×SFP GE or 2×SFP+ 10-Gigabit module, sold separately)
  • Local Management Interfaces: RJ45 serial console, USB Type-B console, USB Type-A flash storage, dedicated out-of-band 10/100 Fast Ethernet management port
  • Stack Interfaces: Dual StackWise Plus 32Gbps stacking connectors + dual StackPower power stacking ports
  • Stacking Limitation: StackPower fully active under IP Services firmware
  • Power Supply: Fixed single 715W AC auto-ranging modular unit; optional external RPS redundant power backup; input 100–240V AC 50/60Hz; total PoE power budget 435W; max total power draw 715W under full PoE load
  • Front Panel LED Indicators: Per-port link/activity, speed, PoE status; global system fault LED, power status indicator
  • Mounting Options: Standard 19-inch 1RU rack-mount brackets included; wall-mount adapter optional, desktop rubber anti-slip feet supplied
  • Thermal Envelope: Variable-speed redundant hot-swappable fan tray; operating temperature 0°C ~ +45°C, storage -25°C ~ +70°C, relative humidity 10–85% non-condensing
  • Safety & EMI Certifications: CE, FCC Class A, UL listed, VCCI Class A, RoHS compliant, NEBS Level 3 certified
  • Physical Dimensions: 445 mm (W) × 44.5 mm (H, 1RU) × 460 mm (D) / 17.5 × 1.75 × 18.0 inches
  • Unit Weight: 4.8 kg (10.6 lbs) with single 715W power supply
  • Memory: 256 MB DRAM, 128 MB onboard flash memory for IOS universal image, startup-config / running-config files
  • Switching Fabric: 32 Gbps full-duplex non-blocking stack-wide capacity
  • Forwarding Rate: 65.5 Mpps wire-speed Layer 2 / full Layer 3 forwarding for 64-byte packets
  • MAC Address Table: Up to 12,000 unicast MAC entries
  • VLAN Capacity: IP Services full limit 1000 active IEEE 802.1Q tagged VLANs (VLAN ID range 1–4094)
  • Multicast Groups: Up to 1024 IPv4 CGMP snooping / full PIM multicast routing groups
  • Jumbo Frame Support: Up to 9000 bytes on all SFP/SFP+ uplink ports and Gigabit copper downlinks
  • MTBF: 167,198 hours under standard office operating conditions
  • Warranty: Cisco Standard Limited Lifetime Hardware Warranty (LLW): Next-business-day advance hardware replacement, 90-day complimentary Cisco TAC technical supportCisco

4. Layer 2 + Full IP Services Multilayer IOS Full Feature Set

Core Layer 2 Switching & QoS Core Functions

  • Up to 1000 IEEE 802.1Q tagged VLANs, VTPv2 dynamic VLAN synchronization, MSTP 802.1s multiple spanning tree
  • Dual trunk encapsulation: Cisco proprietary ISL trunk + IEEE 802.1Q standard trunk on all ports
  • IEEE 802.1p CoS / DSCP multilayer QoS, 4 egress priority queues per port; Auto-QoS template dedicated for VoIP voice traffic prioritization
  • Gigabit EtherChannel link aggregation (LACP / static mode), up to 8 bundled ports for uplink redundancy and cross-stack load balancing
  • Rapid STP (802.1w), UplinkFast, BackboneFast, BPDU Guard, Root Guard to eliminate Layer 2 switching loops
  • Port security: Static MAC assignment, sticky dynamic MAC learning, port shutdown violation action
  • Per-port broadcast/multicast/unicast storm control to mitigate flooding DoS attacks
  • Local SPAN + cross-stack RSPAN port mirroring supported via StackWise Plus stacking
  • CGMP (Cisco Group Management Protocol) to suppress redundant multicast flooding to access ports
  • Voice VLAN dedicated VoIP separation, Auto QoS automatic voice traffic marking
  • Cisco EnergyWise power management to reduce idle endpoint power consumption
  • RMON Groups 1,2,3,9 real-time traffic statistics monitoring
  • NTP time synchronization, CDP Cisco Discovery Protocol for end-to-end network device visibility
  • Embedded web-based Device Manager, Cisco Network Assistant zero-touch stack-wide deployment
  • Full IPv6 dual-stack Layer 2 switching: IPv6 Snooping, IPv6 ACL, IPv6 QoS marking, IPv6 neighbor discovery
  • Hardware MACsec wire-speed encryption on SFP+ 10G uplink ports (requires compatible MACsec-capable SFP+ transceivers)
  • Full Flexible NetFlow for end-to-end traffic visibility (Lite version limited on IP Base/LAN Base)Cisco

Exclusive IP Services Full Multilayer Layer 3 Routing Suite (Not Available in IP Base / LAN Base)

  • Hardware wire-speed IPv4 inter-VLAN routing via SVI switched virtual interfaces
  • Static default route, static prefix routing, RIP v1 / RIP v2 interior gateway protocols
  • Complete interior gateway protocols: Full multi-area OSPF, full EIGRP, EIGRPv3 for IPv6
  • Exterior gateway protocol: BGPv4 for IPv4 inter-domain core routing
  • Multicast routing suite: Full PIM sparse / dense / sparse-dense mode, DVMRP multicast tunneling, full IPv6 PIM multicast routing
  • First-hop redundancy protocols: HSRP, VRRP for IPv4 and IPv6 gateway redundancy, cross-stack HSRP fully supported
  • Policy-Based Routing (PBR) for flexible traffic steering based on ACL match criteria
  • WCCP v2 web cache redirection support for centralized web proxy load balancing
  • Full Layer 3 ingress / egress access control lists for routed subnet traffic filtering
  • Equal-cost multi-path (ECMP) routing for Layer 3 load balancing across multiple uplinks
  • Complete full IPv6 Layer 3 dynamic routing: OSPFv3, EIGRPv6, BGPv6
  • Fallback bridging for non-IP inter-VLAN traffic forwarding

Enterprise Security Feature Suite

  • IEEE 802.1X port-based NAC authentication with RADIUS/TACACS+ AAA remote access control
  • SSH v2 encrypted CLI management; SNMPv3 secure monitoring (fallback unencrypted Telnet/SNMPv1/v2c available)
  • Combined Layer 2 + Layer 3 ingress / egress access control lists for granular inbound/outbound traffic filtering
  • Time-based ACL policy scheduling for restricted network access hours
  • Private VLAN edge isolation to separate host communication within the same broadcast domain
  • DHCP Snooping, Dynamic ARP Inspection (DAI), IP Source Guard to block IP/MAC spoofing attacks
  • Encrypted startup-config, password encryption for local administrative credentials
  • Hardware MACsec point-to-point uplink encryption to protect aggregation traffic

5. Full Management Interfaces

  1. Local Out-of-Band: RJ45 serial console port for offline configuration without network connectivity
  2. Secure Remote CLI: SSH v2 encrypted command-line access; fallback unencrypted Telnet
  3. In-Band Management: Embedded web GUI, SNMP v1/v2c/v3, CDP Cisco Discovery Protocol, NTP time synchronization
  4. Auxiliary Interfaces: USB Type-A flash storage port for IOS image / config backup, dedicated out-of-band 10/100 Fast Ethernet management port
  5. Stack Management: Single unified IP management plane for entire StackWise Plus stack, zero-touch stack provisioning via Cisco Network Assistant

6. Integrated Security Mitigation Suite

  • Multi-level privilege CLI access with encrypted local user password storage
  • IEEE 802.1X port authentication to validate endpoints before granting LAN access
  • Port MAC address security to restrict unauthorized host connection
  • STP BPDU guard and root guard to block rogue switches from altering spanning-tree topology
  • Broadcast/multicast storm control to suppress flooding-based denial-of-service threats
  • Private VLAN edge to isolate peer hosts on same access VLAN
  • DHCP Snooping + DAI ARP Inspection + IP Source Guard to eliminate address spoofing attacks
  • SSHv2 and SNMPv3 encryption to secure remote switch management traffic over the LAN
  • Manual permanent shutdown of unused ports to reduce unauthorized network attack vectors
  • Dedicated management VLAN isolation to segregate switch control plane traffic from end-user data traffic
  • Per-port PoE priority scheduling to protect critical voice/Wi-Fi devices during power budget shortages

7. Typical Deployment Scenarios

  1. Medium/Large Enterprise Stackable Full-Feature Converged PoE Access Switch: 24 PoE+ Gigabit copper ports power multi-floor office IP phones and multi-band enterprise Wi-Fi APs; quad SFP Gigabit uplinks build redundant fiber trunk links to building core multilayer aggregation switches. Full IP Services complete dynamic routing suite (OSPF/EIGRP/BGP/PIM/IPv6) eliminates dedicated core router hardware for large multi-subnet campus segmentation, unified StackWise Plus stacking builds resilient multi-switch access pods for mission-critical high-speed voice/video converged traffic.
  2. Multi-Building K-12 Campus Converged Network: Mass PoE Gigabit design for multi-campus inter-building backbone and classroom multimedia IP phone deployments; four SFP Gigabit uplinks connect to central campus data center for cross-building IPTV and teaching traffic. Full PIM multicast optimizes cross-building video broadcast distribution, complete OSPF dynamic routing supports multi-campus inter-subnet communication without external border routers.
  3. Large Regional Branch Wiring Closet Main Multilayer Switch: Universal PoE Gigabit access ports link branch office desktop stacks and surveillance data aggregators; four-media SFP uplinks support long-distance single-mode fiber trunking to corporate headquarters data center. Complete IP Services full dynamic routing suite enables multi-subnet branch design with HSRP gateway redundancy, meeting full enterprise branch routing, multicast and IPv6 compliance requirements without external dedicated core router investment.
  4. Multi-Location Retail Headquarters Secondary Gigabit Aggregation Switch: PoE copper capacity powers store POS terminals and administrative data aggregation; four Gigabit SFP uplinks deliver trunk failover resilience to retail central data center, advanced Layer 3 egress ACLs isolate payment and surveillance subnet traffic to meet strict PCI DSS data security compliance standards.
  5. Legacy Distributed Flat-Gigabit PoE Access Network Refresh Hardware: Drop-in stackable full-feature replacement for lower-tier IP Base WS-C3750X-24P-S switches, fully compatible with existing StackWise Plus stacking infrastructure, upgrades to complete dynamic Layer 3 inter-VLAN routing and multicast capability for gradual migration to modern Catalyst 9300 unified aggregation platforms without intermediate core router upgrades.

8. Standard Package Contents

1 × Cisco Catalyst WS-C3750X-24P-E Standalone PoE+ Gigabit Multilayer Switch (IP Services IOS Image Preinstalled, fixed single 715W AC power supply pre-installed)
1 × AC power cord matching regional voltage standard
1 × RJ45-to-RS232 serial console rollover cable
1 × Standard 19-inch rack mounting bracket kit
Rubber anti-slip desktop stand feet
Hardware installation guide & Cisco IOS IP Services configuration documentation
SFP/SFP+ fiber/copper uplink transceivers, StackWise Plus stacking cables, StackPower power stacking cables, redundant second power supply, wall-mount adapter sold separately as optional accessories

Short Commercial Version (For Quotation & Product Catalog)

The Cisco Catalyst WS-C3750X-24P-E is a legacy 1RU rack-mount variable-fan stackable Layer 2 / Full Layer 3 managed PoE+ Gigabit access switch from the Catalyst 3750X Series, factory preloaded with IP Services IOS firmware supporting complete OSPF/EIGRP/BGP/PIM multicast routing, HSRP/VRRP full IPv4/IPv6 dynamic routing, equipped with 24×10/100/1000BASE-T IEEE 802.3at PoE+ auto-sensing RJ45 copper access ports plus four hot-swappable independent SFP Gigabit uplink expansion slots, modular single 715W AC power supply with optional redundant power, 32Gbps StackWise Plus stacking bus + native StackPower power pooling support for up to 9 stacked units. It delivers 32 Gbps non-blocking switching fabric, 65.5 Mpps forwarding rate, 12K MAC address table, maximum 1005 VLANs, multilayer DSCP QoS, CGMP multicast snooping, Rapid STP and cross-stack EtherChannel/RSPAN, hardware MACsec uplink encryption, EnergyWise power management, full Flexible NetFlow, with enterprise security tools including 802.1X NAC authentication, SSHv2, DHCP anti-spoofing protection and full IPv4/IPv6 dual-stack multilayer routing. Full-feature quad-SFP uplink PoE converged voice stackable Gigabit multilayer edge switch for medium/large enterprise multi-floor office, multi-building education campus and large regional branch hybrid fiber/copper LAN deployments requiring complete dynamic IP routing and multicast functionality, End-of-Sale legacy Cisco stacking hardware with Enhanced Limited Lifetime Warranty support only.
Click:15 Entry Time:2026-07-10 【Print】 【Close
 © 2026 Kino Technology Limited. All Rights Reserved. | Hong Kong Registered · Shenzhen Operation | New & Genuine Used Network Equipment Supplier 
Links:   白云搜搜   |   未来互联   |   百度   |  
Kino Technology Limited   网站技术支持:未来互联