Cisco Catalyst WS-C3750G-24TS-E Full English Product Description

1. Short Sales Title

2. Official Product Overview

Model Suffix Breakdown

• 3750: Original Catalyst 3750 stackable multilayer platform, StackWise 32Gbps full-duplex stacking bus, rear fixed 4-port SFP uplink bank, single fixed power supply (no StackPower redundant power stacking, no hardware MACsec)Cisco
• 24: Twenty-four 10/100/1000BASE-T Gigabit copper downlink ports (10/100/1000 auto-sensing RJ45, zero PoE hardware)
• T: All copper Gigabit downlink ports; S: Four SFP uplink slots; E: IP Services premium full enterprise multilayer IOS firmware (EMI Enhanced Multilayer Image)Cisco

Core IP Services Feature Differentiation vs IP Base

Stacking Architecture

Power & Uplink Hardware Design

3. Port & Hardware Specifications

Interface Layout

1. Downlink Ports: 24 × 10/100/1000BASE-T RJ45 auto-sensing Gigabit copper, auto MDI-X, full-duplex, no PoE circuits
2. Rear Uplink Interfaces: 4 × hot-swappable independent SFP Gigabit slots (1000BASE-X: SX/LX/LH/ZX/CWDM/1000BASE-T copper SFP compatible)
3. Local Out-of-Band Console: RJ45 RS232 serial out-of-band configuration port
4. Stack Interfaces: Dual StackWise 32Gbps stacking connectors for stack interconnection

Power & Thermal

• Fixed power supply: Single 370W AC hot-swap unit; external RPS redundant power backup optional; input 100–240V AC 50/60Hz; max total power draw 165W under full load
• Cooling: Variable-speed front-to-back fan cooling; operating temperature 0°C ~ +45°C, storage -25°C ~ +70°C, relative humidity 10–85% non-condensing

Performance Parameters

• Switching Fabric: 32 Gbps full-duplex non-blocking stack-wide capacity
• Forwarding Rate: 38.7 Mpps wire-speed Layer 2 / full Layer 3 forwarding for 64-byte packets
• MAC Address Table: Up to 12,000 unicast MAC entriesCisco
• VLAN Capacity: IP Services full limit 1000 active IEEE 802.1Q tagged VLANs (VLAN ID range 1–4094)
• Multicast Groups: Up to 1024 IPv4 CGMP snooping / full PIM multicast routing groups
• Jumbo Frame Support: Up to 9000 bytes on all SFP Gigabit uplink ports and Gigabit copper downlinks

Memory & Firmware

• DRAM: 128 MB
• Flash Memory: 16 MB onboard flash memory for IOS universal image, startup-config / running-config filesCisco
• Supported IOS Trains: 12.2(53)SE, 12.2(55)SE universal images unlocked to full IP Services feature set

Physical & Compliance

• Dimensions: 445 mm (W) × 44.5 mm (H, 1RU) × 301 mm (D) / 17.5 × 1.73 × 11.8 inches
• Unit Weight: 4.1 kg (9.0 lbs)
• Certifications: CE, FCC Class A, UL listed, VCCI Class A, RoHS compliant, NEBS Level 3 certified
• Mounting: Standard 19-inch 1RU rack-mount brackets included, wall-mount adapter optional, desktop rubber anti-slip feet supplied

Warranty

4. Layer 2 + Full IP Services Multilayer IOS Full Feature Set

Core Layer 2 Switching & QoS Core Functions

• Up to 1000 IEEE 802.1Q tagged VLANs, VTPv2 dynamic VLAN synchronization, MSTP 802.1s multiple spanning tree
• Dual trunk encapsulation: Cisco proprietary ISL trunk + IEEE 802.1Q standard trunk on all uplink ports
• IEEE 802.1p CoS / DSCP multilayer QoS, 4 egress priority queues per port; Auto-QoS template dedicated for VoIP voice traffic prioritization
• Gigabit EtherChannel link aggregation (LACP / static mode), up to 8 bundled ports for uplink redundancy and cross-stack load balancing
• Rapid STP (802.1w), UplinkFast, BackboneFast, BPDU Guard, Root Guard to eliminate Layer 2 switching loops
• Port security: Static MAC assignment, sticky dynamic MAC learning, port shutdown violation action
• Per-port broadcast/multicast/unicast storm control to mitigate flooding DoS attacks
• Local SPAN + cross-stack RSPAN port mirroring supported via StackWise stacking
• CGMP (Cisco Group Management Protocol) to suppress redundant multicast flooding to access ports
• Voice VLAN dedicated VoIP separation, Auto QoS automatic voice traffic marking
• Cisco EnergyWise power management to reduce idle endpoint power consumption
• RMON Groups 1,2,3,9 real-time traffic statistics monitoring
• NTP time synchronization, CDP Cisco Discovery Protocol for end-to-end network device visibility
• Embedded web-based Device Manager, Cisco Network Assistant zero-touch stack-wide deployment
• Full IPv6 dual-stack Layer 2 switching: IPv6 Snooping, IPv6 ACL, IPv6 QoS marking, IPv6 neighbor discovery

Exclusive IP Services Full Multilayer Layer 3 Routing Suite (Not Available in IP Base / LAN Base)

• Hardware wire-speed IPv4 inter-VLAN routing via SVI switched virtual interfaces
• Static default route, static prefix routing, RIP v1 / RIP v2 interior gateway protocols
• Complete interior gateway protocols: Full OSPF, full EIGRP, EIGRPv3 for IPv6
• Exterior gateway protocol: BGPv4 for IPv4 inter-domain core routing
• Multicast routing suite: Full PIM sparse / dense / sparse-dense mode, DVMRP multicast tunneling, full IPv6 PIM multicast routing
• First-hop redundancy protocols: HSRP, VRRP for IPv4 and IPv6 gateway redundancy
• Policy-Based Routing (PBR) for flexible traffic steering based on ACL match criteria
• WCCP v2 web cache redirection support for centralized web proxy load balancing
• Full Layer 3 ingress / egress access control lists for routed subnet traffic filtering
• Equal-cost multi-path (ECMP) routing for Layer 3 load balancing across multiple uplinks
• Complete full IPv6 Layer 3 dynamic routing: OSPFv3, EIGRPv6, BGPv6
• Fallback bridging for non-IP inter-VLAN traffic forwarding

Enterprise Security Feature Suite

• IEEE 802.1X port-based NAC authentication with RADIUS/TACACS+ AAA remote access control
• SSH v2 encrypted CLI management; SNMPv3 secure monitoring (fallback unencrypted Telnet/SNMPv1/v2c available)
• Combined Layer 2 + Layer 3 ingress / egress access control lists for granular inbound/outbound traffic filtering
• Time-based ACL policy scheduling for restricted network access hours
• Private VLAN edge isolation to separate host communication within the same broadcast domain
• Per-port bandwidth policing, traffic rate limiting for switched and routed subnets
• DHCP Snooping, Dynamic ARP Inspection (DAI), IP Source Guard to block IP/MAC spoofing attacks
• Encrypted startup-config, password encryption for local administrative credentials

5. Full Management Interfaces

1. Local Out-of-Band: RJ45 RS232 serial console port for offline configuration without network connectivity
2. Secure Remote CLI: SSH v2 encrypted command-line access; fallback unencrypted Telnet
3. Embedded Web GUI: Lightweight browser-based graphical manager for port, VLAN, QoS and uplink configuration
4. SNMP v1/v2c/v3: Compatible with Cisco Prime, DNA Center and third-party network monitoring platforms
5. Local Storage: 16 MB flash memory for IOS image, startup-config and running-config files; no external USB storage port

6. Integrated Security Mitigation Suite

• Multi-level privilege CLI access with encrypted local user password storage
• IEEE 802.1X port authentication to validate endpoints before granting LAN access
• Port MAC address security to restrict unauthorized host connection
• STP BPDU guard and root guard to block rogue switches from altering spanning-tree topology
• Broadcast/multicast storm control to suppress flooding-based denial-of-service threats
• Private VLAN edge to isolate peer hosts on same access VLAN
• DHCP Snooping + DAI ARP Inspection + IP Source Guard to eliminate address spoofing attacks
• SSHv2 and SNMPv3 encryption to secure remote switch management traffic over the LAN
• Manual permanent shutdown of unused ports to reduce unauthorized network attack vectors
• Dedicated management VLAN isolation to segregate switch control plane traffic from end-user data traffic

7. Typical Deployment Scenarios

1. Medium/Large Enterprise Standalone Full-Feature Stackable Layer 3 Converged Edge Switch: 24 Gigabit copper ports power multi-floor office IP phones and multi-band enterprise Wi-Fi APs; four SFP Gigabit uplinks provide redundant fiber trunk connections to building core multilayer aggregation switches. Full IP Services complete dynamic routing suite (OSPF/EIGRP/BGP/PIM/IPv6) eliminates dedicated router hardware for large multi-subnet campus segmentation, unified StackWise stacking builds resilient multi-switch access pods for mission-critical high-speed voice/video converged traffic.
2. Multi-Building K-12 Campus Converged Network: Full Gigabit non-PoE design for multi-classroom student workstation and classroom multimedia IP phone deployments; four SFP Gigabit uplinks connect to campus backbone for high-bandwidth IPTV and online teaching traffic. Full PIM multicast optimizes cross-building video broadcast distribution, complete OSPF dynamic routing supports multi-campus inter-building subnet communication without external border routers.
3. Medium/Large Regional Branch Wiring Closet Main Multilayer Switch: Universal non-PoE access ports connect branch office endpoints and surveillance devices; four-media SFP uplinks support long-distance single-mode fiber trunking to corporate headquarters. Complete IP Services full dynamic routing suite enables multi-subnet branch design with HSRP gateway redundancy, meeting full enterprise branch routing, multicast and IPv6 compliance requirements without external router investment.
4. Multi-Location Retail Headquarters Secondary Aggregation Switch: Gigabit copper capacity connects store POS terminals and administrative desktops; four Gigabit SFP uplinks deliver trunk failover resilience to retail central data center, advanced Layer 3 egress ACLs isolate payment and surveillance subnet traffic to meet strict PCI DSS data security compliance standards.
5. Legacy Distributed Flat Layer 2 Network Refresh Hardware: Drop-in stackable replacement for aging IP Base Catalyst 3750G switches, fully compatible with existing ISL trunk legacy fiber infrastructure, upgrades to complete dynamic Layer 3 inter-VLAN routing and multicast capability for gradual migration to modern Catalyst 9300 unified aggregation platforms without intermediate core router upgrades.

8. Standard Package Contents

Short Commercial Version (For Quotation & Product Catalog)