|
Company Name:Kino Technology Limited
Website:www.kino86.com
Address :Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person:kiki
Tel :+8613040881925
E-mail:kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id: |
7101139116 |
ProductName: |
WS-C3560-24PS-S |
Specification: |
|
Product Notes: |
|
Product Category: |
Cisco |
| |
|
| Product Description |
Cisco Catalyst WS-C3560-24PS-S Full English Product Description
1. Short Sales Title (For Quotation & Product Catalog)
Cisco WS-C3560-24PS-S 1RU Rack-Mount Fixed Multilayer Converged Voice/Data Fast Ethernet Switch, 24×10/100BASE-T IEEE 802.3af PoE Access Ports, 2 Hot-Swappable SFP Gigabit Uplink Slots, IP Base IOS Image, Fixed High-Capacity AC Power, 370W Integrated PoE Budget, Hardware CEF Layer 3 Routing (Static / RIP), Dual ISL/802.1Q Trunking, CGMP Multicast Control, Per-Port QoS, Auto-QoS for VoIP, External RPS 675 Redundant Power Support, End-of-Sale Legacy Enterprise PoE Access Switch for Office VoIP Phones, Wireless AP, Multi-Subnet Branch & Campus Edge Deployments
2. Official Product Overview
The Cisco Catalyst WS-C3560-24PS-S belongs to the original Catalyst 3560 fixed multilayer access switch series, fully End-of-Sale (EoS). It is a converged voice-data edge switch integrating built-in IEEE 802.3af inline PoE power and native hardware Layer 3 IP routing, designed for medium enterprise, K-12 education and regional branch deployments requiring simultaneous power delivery to IP phones, wireless APs and low-power IP cameras without external power injectors.
This model provides 24 auto-sensing 10/100 Fast Ethernet RJ45 PoE downlink ports, each delivering up to 15.4W Class 3 PoE power. The total integrated PoE power budget is 370W, supporting priority-based power shedding to protect critical voice endpoints under power overload conditions. Two front independent SFP Gigabit uplink slots accept hot-swappable 1000BASE-SX/LX/LH/ZX fiber and 1000BASE-T copper SFP transceivers for flexible core uplink interconnection. No stacking hardware or cluster bus is built-in; the switch operates only as an independent standalone unit Cisco.
The suffix breakdown:
-
PS: P = Integrated IEEE 802.3af PoE power supply; S = dedicated SFP Gigabit uplink expansion slots
-
S: IP Base standard multilayer IOS firmware, the factory default lightweight Layer 3 image
IP Base delivers hardware CEF-accelerated inter-VLAN routing, static routes and RIP v1/v2 only; advanced dynamic routing protocols (OSPF, EIGRP, BGP), PIM multicast routing and HSRP/VRRP gateway redundancy require an IP Services IOS upgrade license. The chassis uses a fixed internal high-wattage single AC power supply with a rear dedicated RPS connector compatible with Cisco RPS 675 external redundant power systems to eliminate single power failure risks for mission-critical voice/data converged networksCisco.
Model Suffix Breakdown
-
3560: Catalyst 3560 fixed multilayer platform with native hardware CEF Layer 3 forwarding
-
24: Twenty-four 10/100 Fast Ethernet RJ45 PoE downlink ports
-
PS: PoE power integrated + SFP Gigabit uplink expansion slots
-
S: IP Base standard multilayer IOS, limited basic Layer 3 routing feature set (static + RIP only)
This standard 1U metal rack-mount chassis adopts variable-speed front-to-back fan cooling for stable thermal operation in multi-floor central wiring closets. Front panel layout: 24 Fast Ethernet PoE RJ45 ports, two separate SFP bays and multi-mode status LEDs for port link/activity, PoE power allocation, uplink media type and system fault. Rear panel hosts RJ45 RS232 serial console port, AC power inlet and RPS redundant power connector.
All RJ45 ports support auto MDI-X, auto speed/duplex negotiation and full-duplex flow control. SFP transceivers support hot swap without full switch reboot to minimize on-site maintenance downtime. PoE power management includes per-port priority classification, real-time power budget monitoring and automatic power shutdown of low-priority non-voice devices to guarantee VoIP uptime during power shortages.
Equipped with 128 MB DRAM and 16 MB onboard flash memory, the WS-C3560-24PS-S delivers 32 Gbps full-duplex non-blocking switching capacity and 38.7 Mpps wire-speed Layer 2 / Layer 3 forwarding rate for 64-byte frames, full line-rate performance on all downlink and uplink interfaces. It adopts store-and-forward switching architecture to filter corrupted frames and suppress broadcast/multicast flooding across VLAN domains, with jumbo frame support up to 1546 bytes for MPLS and large video traffic transmission抖音百科.
3. Port & Hardware Specifications
-
24 × 10/100BASE-T RJ45 auto-sensing Fast Ethernet access ports, auto MDI-X, IEEE 802.3x full-duplex flow control, IEEE 802.3af PoE (max 15.4W per port)
-
Total integrated PoE power budget: 370W built-in PoE supply (supports 24×15.4W Class3 devices simultaneously; PoE priority scheduling prioritizes voice ports during power overload)Cisco
-
2 × hot-swappable independent SFP Gigabit uplink slots (1000BASE-X), compatible with Cisco SFP modules: 1000BASE-SX, LX/LH, ZX, CWDM, 1000BASE-T copper SFP
-
Local Out-of-Band Console: 1×RJ45 RS232 serial console port; no Mini-USB console, front USB storage port or dedicated out-of-band management Ethernet
-
Stacking: No stacking hardware, StackPower/GigaStack/switch clustering not supported, standalone operation only
-
Power architecture: Fixed internal integrated high-wattage AC power supply, input 100–240 VAC autoranging 50/60Hz; max total power consumption 485W under full PoE load; rear RPS connector compatible with Cisco RPS 675 external redundant power supply抖音百科
-
Front panel LED indicators: Per-port link/activity, speed, duplex, PoE power delivery status; SFP uplink media status, global system fault alarm, RPS power status indicator
-
Mounting options: 19-inch 1RU rack-mount brackets included; desktop rubber anti-slip feet supplied
-
Thermal design: Variable-speed active fan cooling
-
Environmental operating range: 0°C to 45°C (32°F–113°F); storage -25°C to 70°C; relative humidity 10–85% non-condensing
-
Safety & EMI certifications: CE, FCC Class A, UL listed, VCCI Class A, RoHS compliant
-
Physical dimensions: 445 mm (W) × 44.5 mm (H, 1RU) × 332 mm (D)
-
Unit weight: 5.1 kg (11.2 lbs)
-
MAC address table capacity: Up to 12,000 unicast MAC entries
-
Maximum active VLANs: 1005 active IEEE 802.1Q tagged VLANs, full VLAN ID range 1–4094
-
Multicast Groups: 256 IPv4 CGMP snooping groups
-
MTBF: 160,000 hours under standard office operating conditions
-
Warranty: Original Cisco Limited Lifetime Hardware Warranty (EoS, only third-party refurbished hardware support available)
4. Layer 2 + IP Base Limited Layer 3 IOS Full Feature Set
Core Layer 2 Switching & QoS Core Functions
-
Up to 1005 active IEEE 802.1Q tagged VLANs, VTPv2 dynamic VLAN synchronization, MSTP 802.1s multiple spanning tree
-
Dual trunking standards: Cisco proprietary ISL trunking + IEEE 802.1Q open-standard trunking on both SFP Gigabit uplink ports
-
IEEE 802.1p CoS / DSCP multilayer QoS with 4 egress priority queues per port; strict priority scheduling optimized for VoIP voice traffic
-
Gigabit EtherChannel link aggregation, up to 8-port bundled trunking for fault tolerance and aggregated backbone bandwidth
-
IEEE 802.1D STP + Rapid STP (802.1w), UplinkFast, BackboneFast, BPDU guard, root guard to eliminate Layer 2 switching loops
-
Port security: Static MAC binding, sticky dynamic MAC learning, port shutdown violation mode
-
Per-port broadcast/multicast/unicast storm control to mitigate Layer 2 flooding DoS attacks
-
Local SPAN port mirroring (cross-stack RSPAN remote span disabled due to no stacking hardware)
-
Cisco CGMP (Cisco Group Management Protocol) to suppress unnecessary multicast flooding to access ports
-
Voice VLAN, Auto QoS for automatic Cisco IP Phone traffic priority marking
-
IEEE 802.3af PoE intelligent management: PoE port priority classification, real-time 370W budget monitoring, automatic low-priority port power shutdown under overload protection
-
Cisco EnergyWise power management to reduce idle PoE endpoint power draw and cut facility energy cost
-
RMON Groups 1,2,3,9 real-time traffic statistics monitoring
-
NTP time synchronization for consistent system log timestamps
-
CDP Cisco Discovery Protocol for end-to-end network device visibility
-
Web-based embedded Device Manager & Cisco Network Assistant for zero-touch initial deployment
-
Full IPv6 dual-stack Layer 2 switching: IPv6 Snooping, IPv6 ACLs, IPv6 QoS marking, IPv6 neighbor discovery
Exclusive IP Base Standard Multilayer Layer 3 Routing Features (Hardware CEF Accelerated)
-
Hardware accelerated IPv4 inter-VLAN routing via SVI (Switched Virtual Interface)
-
Static routing, default route support for campus/branch core uplink forwarding
-
Interior gateway protocol: RIP v1/v2 only (OSPF, EIGRP, BGP, PIM multicast routing require IP Services upgrade license)
-
Basic Layer 3 ingress access control lists for routed traffic filtering
-
Equal-cost multi-path (ECMP) static route load balancing
-
No HSRP/VRRP gateway redundancy or multicast routing support in IP Base image
Enterprise Advanced Security Features
-
IEEE 802.1X port-based NAC authentication with RADIUS/TACACS+ AAA remote access control
-
SSHv2 encrypted remote CLI management; SNMPv3 secure encrypted monitoring (unencrypted Telnet/SNMPv1/v2c available as fallback)
-
Combined Layer 2 ingress access control lists (ACLs) for IPv4 and IPv6 granular inbound traffic filtering
-
Time-based ACL traffic policies for scheduled network access restrictions
-
Private VLAN edge for isolated host segmentation on shared access ports
-
Ingress port bandwidth rate limiting, traffic policing and shaping for switched traffic
-
DHCP Snooping + Dynamic ARP Inspection (DAI) + IP Source Guard to mitigate IP/MAC address spoofing attacks
-
Encrypted local user passwords and encrypted startup-config file storage
5. Full Management Interfaces
-
Local Out-of-Band: RJ45 RS232 serial console port for direct CLI access without live network connectivity
-
Secure Remote CLI: SSHv2 encrypted command-line access; fallback password-authenticated Telnet
-
Embedded Web GUI: Lightweight browser-based Device Manager for port, VLAN, QoS and PoE configuration panel
-
SNMP v1/v2c/v3: Encrypted/unencrypted enterprise monitoring compatible with Cisco Prime and third-party NMS platforms
-
Local Storage: 16 MB onboard flash memory to store IOS operating image, startup-config and running-config files (encrypted config storage; no external USB backup port)
6. Integrated Enhanced Security Suite
-
Multi-level privilege CLI access with encrypted local user password storage
-
IEEE 802.1X port authentication to validate end-user devices before granting LAN access
-
Port security to restrict unauthorized end-device MAC addresses per access port
-
STP BPDU guard and root guard to block rogue unmanaged switches from corrupting Layer 2 topology
-
Broadcast storm control to suppress flooding-based denial-of-service threats
-
Private VLAN edge to isolate connected endpoints from each other on shared access ports
-
DHCP Snooping + DAI ARP inspection + IP Source Guard to eliminate address spoofing attacks
-
SSHv2 and SNMPv3 encryption to secure remote switch management traffic over the LAN
-
Manual permanent shutdown of unused ports to reduce unauthorized network attack vectors
-
Dedicated management VLAN isolation to segregate switch control plane traffic from end-user data
-
PoE overload protection logic to cut power to low-priority PoE ports when total power consumption exceeds 370W budget threshold
7. Typical Deployment Scenarios
-
Medium Enterprise Standalone Converged Voice/Data Edge Switch: 24 PoE Fast Ethernet ports power Cisco IP phones and single-band Wi-Fi APs; dual SFP Gigabit uplinks provide fiber trunk connections to building core aggregation switches. IP Base basic Layer 3 routing eliminates low-cost small router hardware for simple inter-VLAN office segmentation, and RPS redundant power eliminates single power failure risks for mission-critical voice office floors.
-
K-12 Multi-Floor Classroom Converged Network: Integrated PoE design powers classroom VoIP phones and student wireless access points; dual SFP Gigabit uplinks provide separate trunk links to campus backbone for multimedia teaching IPTV traffic. MSTP and storm control prevent broadcast loop outages across multi-building VLAN domains.
-
Medium Regional Branch Wiring Closet Main Switch: Universal PoE access ports eliminate separate power injectors for all branch voice, wireless and surveillance endpoints; dual-media SFP uplinks support long-distance fiber trunking to corporate headquarters. IP Base limited routing feature set satisfies flat multi-VLAN branch network demands without extra expensive IP Services license cost.
-
Multi-Location Retail Headquarters Aggregation Switch: PoE capacity powers store IP phones and basic security cameras; dual Gigabit SFP uplinks deliver trunk failover resilience to retail central data center, fixed high-wattage internal power supply suits full PoE retail network segments.
-
Legacy Enterprise Flat Layer 2 Network Refresh Secondary Edge Hardware: Drop-in replacement for aging Catalyst 3500 XL non-PoE switches, fully compatible with existing ISL trunking legacy core infrastructure, supporting gradual migration to modern Catalyst 9000 series hardware while adding integrated PoE power and basic hardware Layer 3 inter-VLAN routing capability.
8. Standard Package Contents
1 × Cisco Catalyst WS-C3560-24PS-S Stackable Full PoE Fast Ethernet Multilayer Switch (IP Base IOS Image Preinstalled, fixed internal high-wattage AC power supply pre-installed)
1 × AC power cord
1 × RJ45-to-RS232 console rollover cable
1 × 19-inch rack mounting bracket kit
Rubber desktop stand feet
Hardware installation guide & Cisco IOS IP Base configuration documentation
*SFP fiber/copper transceivers, external RPS redundant power supply sold separately as optional accessories; stacking modules not included by default
Short Commercial Version (For Quotation & Product Catalog)
The Cisco Catalyst WS-C3560-24PS-S is a legacy 1RU rack-mount variable-fan standalone Layer 2 / Lite Layer 3 managed PoE Fast Ethernet edge switch from the Cisco Catalyst 3560 Series, factory preloaded with IP Base IOS firmware supporting static & RIP inter-VLAN routing, equipped with 24×10/100BASE-T PoE-capable auto-sensing RJ45 copper access ports (370W full IEEE 802.3af PoE budget) plus two hot-swappable SFP Gigabit uplink expansion slots compatible with fiber and copper transceivers, external RPS redundant power supply compatibility. It delivers 32 Gbps non-blocking switching capacity, 12000 MAC address table, 1005 active VLANs, multilayer DSCP QoS, CGMP multicast control, Rapid STP and port security, with full enterprise-grade security tools including 802.1X NAC authentication, SSHv2, DHCP anti-spoofing protection and full IPv4/IPv6 dual-stack multilayer switching. Low-cost dual-SFP Gigabit uplink PoE multilayer standalone Fast Ethernet edge switch for medium office, education classroom and medium branch converged voice multi-subnet hybrid fiber/copper LAN deployments, End-of-Sale legacy Cisco switching hardware with third-party refurbished warranty support only.
|
|
|
| Click:8 Entry Time:2026-07-10 【Print】 【Close】 |
|
|
|
|