Cisco Catalyst WS-C2960S-48TD-L Full English Product Description

1. Short Sales Title (For Quotation & E-commerce Listing)

2. Official Product Overview

Model Suffix Breakdown

• 2960S: Next-generation stackable Catalyst 2960 managed switch platform (supports optional FlexStack hot-swappable stack modules, increased DRAM/flash and superior forwarding performance vs non-stack 2960)
• 48: Forty-eight fixed 10/100/1000 auto-sensing RJ45 all-Gigabit downlink ports, zero PoE power capability
• TD: T = All 48 ports are 10/100/1000BASE-T copper downlinks; D = Two dual-rate SFP/SFP+ uplink slots (compatible with both 1G and 10G transceivers)
• L: LAN Base full-feature IOS image with advanced 802.1X NAC authentication, multilayer DSCP QoS, DHCP anti-spoofing tools, IPv6 dual-stack and Cisco EnergyWise power optimization

3. Port & Hardware Specifications

• 48 × 10/100/1000BASE-T RJ45 auto-sensing copper access ports, auto MDI-X, IEEE 802.3x full-duplex flow control, no PoE power support
• 2 × dual-rate hot-swappable uplink slots: Support 1000BASE-X SFP or 10GBASE-X SFP+ transceivers
• 1 × RJ45 RS232 serial console port for out-of-band offline CLI configuration
• Rear FlexStack stacking expansion slot (requires optional FlexStack module and dedicated stack cables for multi-switch stacking)
• Power supply: Internal fixed autoranging AC input (100–240 VAC 50/60Hz), max total system power consumption 135W
• Rear RPS connector: Compatible with optional Cisco RPS 2300 external redundant power supply for power failure resilience
• Front panel LED indicators: Per-port link/activity, speed, duplex; uplink slot operational status, stack link health, system fault alarm
• Mounting options: 19-inch 1RU rack-mount brackets included; rubber anti-slip desktop stand feet supplied
• Thermal design: Variable-speed active fan cooling for standard indoor wiring closet ambient environments
• Environmental operating range: 0°C to 45°C (32°F–113°F); storage -25°C to 70°C; relative humidity 10–85% non-condensing
• Safety & EMI certifications: CE, FCC Class A, UL listed, VCCI Class A, RoHS compliant
• Physical dimensions: 444.5mm (W) × 44.5mm (H, 1RU) × 299mm (D)
• Unit weight: 4.2 kg (9.3 lbs)
• MAC address table capacity: Up to 8,192 MAC entries
• Maximum active VLANs: 255 active IEEE 802.1Q tagged VLANs (limited to only 64 VLANs on LAN Lite -S firmware)
• MTBF: 530,000 hours under standard office operating conditions
• Warranty: Cisco Limited Lifetime Hardware Warranty with full-feature LAN Base IOS software updates

4. Layer 2 Switching, QoS & LAN Base IOS Full Feature Set

Core Base Switching & Fundamental QoS Core Functions

• Up to 255 active IEEE 802.1Q tagged VLANs, full VLAN ID range 1–4094, VTPv2, VTPv3, MSTP 802.1s multiple spanning tree
• IEEE 802.1p CoS / DSCP multilayer QoS with 4 egress priority queues; Strict Priority / WRR scheduling for voice/video/data traffic classification
• IEEE 802.3ad Gigabit EtherChannel static link aggregation for multi-port copper/SFP/SFP+ trunk bundling, cross-stack EtherChannel supported via FlexStack
• IEEE 802.1D STP + Rapid STP (802.1w), BPDU guard / Root guard to eliminate Layer 2 switching loops
• Port security: Static MAC binding, sticky dynamic MAC learning, port shutdown violation mode
• Broadcast/multicast/unicast storm control to mitigate Layer 2 flooding DoS attacks
• Local SPAN port mirroring + cross-stack RSPAN remote span for multi-switch traffic capture and troubleshooting
• IGMP Snooping v1/v2/v3 to reduce redundant multicast bandwidth consumption for video streaming and IPTV
• Voice VLAN, basic Auto QoS for automatic Cisco IP Phone traffic priority marking
• FlexStack multi-switch stack single-pane unified management, cross-stack configuration synchronization
• Cisco EnergyWise intelligent port power management to reduce idle endpoint power draw
• RMON Groups 1,2,3,9 real-time traffic statistics monitoring
• NTP time synchronization for consistent system log timestamps
• CDP Cisco Discovery Protocol for adjacent network device detection
• Cisco IP SAA Service Assurance Agent for end-to-end network performance testing
• Web-based embedded Device Manager & Cisco Network Assistant for zero-CLI initial deployment
• Full IPv6 dual-stack Layer 2 switching: IPv6 Snooping, IPv6 ACLs, IPv6 QoS marking, IPv6 neighbor discovery

Exclusive Advanced LAN Base Security & Management Features (Not Supported on LAN Lite -S Firmware)

• IEEE 802.1X port-based NAC authentication with RADIUS/TACACS+ AAA remote access control
• SSHv2 encrypted remote CLI management; SNMPv3 secure encrypted monitoring (only unencrypted Telnet & SNMPv1/v2c available on LAN Lite)
• Layer 2/Layer 3/Layer 4 ingress access control lists (ACLs) for IPv4 and IPv6 granular inbound traffic filtering
• Time-based ACL traffic policies for scheduled network access restrictions
• Private VLAN edge for isolated host segmentation on shared access ports
• Ingress port bandwidth rate limiting, traffic policing and shaping
• DHCP Snooping + Dynamic ARP Inspection (DAI) + IP Source Guard to mitigate IP/MAC address spoofing attacks
• Advanced multilayer DSCP QoS reclassification for multi-service converged voice/video/data networks
• Encrypted local user passwords and encrypted startup-config file storage

5. Full Management Interfaces

1. Local Out-of-Band: RJ45 RS232 serial console port for direct Cisco IOS CLI access without live network connectivity
2. Secure Remote CLI: SSHv2 encrypted command-line access; fallback password-authenticated Telnet
3. Embedded Web GUI: Feature-rich browser-based Cisco Device Manager for port, VLAN and QoS configuration panel
4. SNMP v1/v2c/v3: Encrypted/unencrypted enterprise monitoring compatible with CiscoWorks and third-party NMS platforms
5. RMON Traffic Analytics: Full bandwidth, error and utilization reporting for comprehensive fault diagnosis and capacity planning
6. Local Storage: 64 MB onboard flash memory to store IOS operating image, startup-config and running-config files (encrypted config storage)

6. Integrated Enhanced Security Suite

• Multi-level privilege CLI access with encrypted local user password storage
• IEEE 802.1X port authentication to validate end-user devices before granting LAN access
• Port security to restrict unauthorized end-device MAC addresses per access port
• STP BPDU guard and root guard to block rogue unmanaged switches from corrupting Layer 2 topology
• Broadcast storm control to suppress flooding-based denial-of-service threats
• Private VLAN edge to isolate connected endpoints from each other on shared access ports
• DHCP Snooping + DAI ARP inspection + IP Source Guard to eliminate address spoofing attacks
• SSHv2 and SNMPv3 encryption to secure remote switch management traffic over the LAN
• Manual permanent shutdown of unused ports to reduce unauthorized network attack vectors
• Dedicated management VLAN isolation to segregate switch control plane traffic from end-user data
• No PoE hardware, so no PoE overload protection logic required

7. Typical Deployment Scenarios

• Large enterprise stackable high-density all-Gigabit aggregation switch: 48 non-PoE full Gigabit ports connect mass employee workstations, printers and Cisco IP phones; two dual-rate uplink slots support flexible 1G copper or 10G fiber SFP/SFP+ transceivers for redundant high-speed trunking to building core switches, FlexStack enables stacking to expand port density without multiple independent management IPs
• Education campus multi-floor building aggregation network: Non-PoE design fits labs and offices without wireless AP power requirements, dual-rate uplinks support 10G inter-building trunking for large campus video streaming traffic
• Large regional branch office wiring closet core switch: Cost-effective non-PoE hardware eliminates unnecessary PoE power supply overhead, modular dual-rate uplinks deliver long-distance fiber backhaul to corporate headquarters and support future 10G core upgrades without hardware replacement
• Multi-location retail headquarters back-office dense user aggregation: High 48-port capacity for regional admin and cashier workstations, dual uplink media options provide redundant copper/fiber trunk paths to central retail data center
• Enterprise campus full network refresh: Direct drop-in replacement for older Catalyst 2950/2960 non-stackable switches, adding FlexStack stacking and native 10G uplink scalability for enterprise networks with strict NAC and anti-spoofing security policies

8. Standard Package Contents

Short Commercial Version (For Quotation & Product Catalog)