Homepage | Collection | 繁体中文
Product
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
H3C
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
Contact Us


Company Name:Kino Technology Limited

Website:www.kino86.com

Address :Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China



Contact Person:kiki

Tel :+8613040881925 

E-mail:kiki@szkiki.com

Wechat:+8613040881925

Whatspp: +8613040881925

Teams:kiki@szkiki.com





Products
 Product >> Cisco >> ALL
 
Product_Id:
7914422316
ProductName:
WS-C2950T-48-SI
Specification:
Product Notes:
Product Category:
Cisco
 
   Product Description

Cisco Catalyst WS-C2950T-48-SI Full English Product Description

1. Short Sales Title (For Quotation & E-commerce Listing)

Cisco WS-C2950T-48-SI 1RU Rack-Mount Layer 2 Fast Ethernet Access Switch, 48×10/100BASE-TX RJ45 Downlink Ports + 2×Fixed 10/100/1000BASE-T Gigabit Copper Uplinks, Standard IOS Standard Image (SI), Fixed All-Copper Chassis, Cisco Switch Clustering Supported, Wire-Speed QoS, VLAN & Port Security, Ideal for Large Office, Campus Dense Access Layer, Large Branch Wiring Closet & Legacy Enterprise Gigabit Copper Trunk Deployments

2. Official Product Overview

The Cisco Catalyst WS-C2950T-48-SI is a high-density fixed-port Layer 2 managed Fast Ethernet switch from the legacy Catalyst 2950 intelligent edge switching family. It delivers 48 fixed 10/100 copper access ports plus two built-in dedicated 1000BASE-T Gigabit copper uplink ports for high-bandwidth trunking to core/distribution switches, eliminating the need for separate modular GBIC transceivers. It ships factory preloaded with Standard Image (SI) Cisco IOS firmware, which only provides baseline Layer 2 switching, QoS and basic security features; advanced enterprise functions such as 802.1X, SSH, private VLAN edge and multi-layer ACLs are exclusive to Enhanced Image (EI) hardware models.

Model Suffix Breakdown

  • 2950: Catalyst 2950 intelligent edge managed switch series
  • 48: Forty-eight fixed 10/100 auto-negotiate RJ45 copper downlink access ports
  • T: Dual integrated 10/100/1000BASE-T Gigabit copper uplink ports on front panel
  • SI: Standard IOS Image with basic Layer 2 feature set, no advanced EI security & traffic control functions
This compact 1U metal rack-mount chassis integrates an internal autoranging AC power supply and built-in cooling fan for stable wiring closet operation. Cisco Switch Clustering technology enables unified single-IP management of multiple Catalyst 2950 series switches to scale port density across multi-floor large campus and enterprise office deployments. All RJ45 ports support IEEE auto-negotiation for 10/100/1000 speed, half/full duplex and auto MDI-X to eliminate crossover cable requirements.
Equipped with 16 MB DRAM, 8 MB flash storage and shared packet buffer memory, the WS-C2950T-48-SI delivers 13.6 Gbps non-blocking switching capacity and 10.1 Mpps wire-speed forwarding rate for 64-byte frames, supporting lossless concurrent transmission of voice, video and data traffic across all 48 Fast Ethernet access ports and dual Gigabit copper uplinks. It adopts store-and-forward switching architecture to filter corrupted frames and prevent broadcast domain flooding across the LAN.

3. Port & Hardware Specifications

  • 48 × 10/100BASE-TX RJ45 auto-sensing copper access ports, auto MDI-X, IEEE 802.3x full-duplex flow control
  • 2 × fixed 10/100/1000BASE-T RJ45 Gigabit copper uplink ports compliant with IEEE 802.3ab
  • 1 × RJ45 RS232 serial console port for out-of-band CLI configuration
  • No modular expansion slots, fully fixed all-copper port design
  • Stacking capability: Cisco Switch Clustering via Fast Ethernet or Gigabit copper inter-switch trunk links
  • Power supply: Internal fixed autoranging AC input (100–240 VAC 50/60 Hz), max power consumption 50W
  • Rear RPS connector: Compatible with optional Cisco external redundant power supply for power failure resilience
  • Front panel LED indicators: Per-port link/activity, speed, duplex; system status, RPS power status, bandwidth utilization
  • Mounting options: 19-inch 1RU rack-mount brackets included; rubber feet for standalone desktop placement
  • Thermal design: Active fan cooling for standard indoor wiring closet ambient environments
  • Environmental operating range: 0°C to 45°C (32°F–113°F); storage -25°C to 70°C; relative humidity 10–85% non-condensing
  • Safety & EMI certifications: CE, FCC Class A, UL listed, VCCI Class A
  • Physical dimensions: 445 mm (W) × 44.5 mm (H, 1RU) × 242 mm (D)
  • Unit weight: 3.3 kg (7.3 lbs)
  • MAC address table capacity: Up to 8,000 MAC entries
  • MTBF: 510,000 hours under standard office operating conditions
  • Warranty: Cisco Limited Lifetime Hardware Warranty

4. Layer 2 Switching, QoS & Standard IOS (SI) Feature Set

Core Supported Standard Image Features

  • Up to 64 active IEEE 802.1Q tagged VLANs, full VLAN ID range 1–1005, VTP dynamic VLAN management
  • IEEE 802.1p CoS QoS with 4 egress priority queues; Strict Priority / WRR scheduling for voice/video/data traffic classification
  • IEEE 802.3ad Fast EtherChannel / Gigabit EtherChannel static link aggregation for multi-port trunk bundling
  • IEEE 802.1D STP Spanning Tree Protocol + BPDU guard / Root guard to eliminate Layer 2 switching loops
  • Port security: Static MAC binding, sticky dynamic MAC learning, port shutdown violation mode
  • Broadcast/multicast/unicast storm control to mitigate Layer 2 flooding DoS attacks
  • SPAN port mirroring for traffic capture and network fault troubleshooting
  • IGMP Snooping v1/v2 to reduce redundant multicast bandwidth consumption for video streams
  • Voice VLAN for automatic classification and priority marking of Cisco IP Phone traffic
  • Cisco Switch Clustering for single-pane unified management of multiple clustered switches
  • RMON Groups 1,2,3,9 real-time traffic statistics monitoring
  • NTP time synchronization for consistent system log timestamps
  • CDP Cisco Discovery Protocol for automatic adjacent network device discovery
  • Web-based Cisco Cluster Management Suite (CMS) & Cisco Express Setup for zero-CLI initial deployment

Features NOT Supported on Standard SI Image (Exclusive to EI Models)

  • IEEE 802.1X port-based authentication, SSHv2 encrypted remote CLI, SNMPv3 secure monitoring
  • Layer 2/Layer 3/Layer 4 access control lists (ACLs), private VLAN edge host isolation
  • Ingress port bandwidth rate limiting, time-based ACLs, advanced DSCP QoS reclassification

5. Full Management Interfaces

  1. Local Out-of-Band: RJ45 RS232 serial console port for direct Cisco IOS CLI access without live network connectivity
  2. Remote CLI: Password-authenticated Telnet command-line management (no SSH support on SI)
  3. Embedded Web GUI: Browser-based Cisco Cluster Management Suite visual switch manager for port, VLAN and QoS configuration
  4. SNMP v1/v2c: Standard enterprise monitoring compatible with CiscoWorks and third-party NMS platforms
  5. RMON Traffic Analytics: Built-in bandwidth, error and utilization reporting for fault diagnosis and capacity planning
  6. Local Storage: 8 MB onboard flash memory to store IOS operating image, startup-config and running-config files

6. Integrated Security Suite

  • Multi-level privilege CLI access with encrypted local user password storage
  • Port security to restrict unauthorized end-device MAC addresses per access port
  • STP BPDU guard and root guard to block rogue unmanaged switches from corrupting Layer 2 topology
  • Broadcast storm control to suppress flooding-based denial-of-service threats
  • Manual shutdown of unused ports to reduce unauthorized network access attack vectors
  • Dedicated management VLAN isolation to segregate switch control plane traffic from user data

7. Typical Deployment Scenarios

  • Large enterprise office high-density access layer switch: 48 Fast Ethernet ports connect mass employee PCs, printers and Cisco IP phones; dual built-in Gigabit copper uplinks deliver high-speed trunking to building core switches without fiber transceivers
  • Education campus multi-floor building aggregation switch: Cluster multiple WS-C2950T-48-SI units to scale student workstation port density, Gigabit copper uplinks connect to campus distribution layer switches over short-distance copper cabling
  • Large regional branch office wiring closet core switch: All-copper fixed design simplifies deployment for sites with copper backbone cabling to corporate headquarters
  • Retail headquarters back-office dense user aggregation: 48-port high-density design for central office staff workstations and POS terminals, native Gigabit copper uplinks for trunking to regional retail data center
  • Legacy factory auxiliary LAN aggregation: Copper ports connect HMIs, PLCs and unpowered field sensors; Gigabit copper uplinks link to factory central server room over short copper runs

8. Standard Package Contents

1 × Cisco Catalyst WS-C2950T-48-SI Fast Ethernet Switch (Standard IOS SI Image Preinstalled)
1 × AC power cord
1 × RJ45-to-RS232 console rollover cable
1 × 19-inch 1RU rack mounting bracket kit
Rubber desktop stand feet
Hardware installation guide & Cisco IOS configuration documentation
*External redundant power supply sold separately as optional accessory

Short Commercial Version (For Quotation & Product Catalog)

The Cisco Catalyst WS-C2950T-48-SI is a legacy 1RU rack-mount fan-cooled Layer 2 managed Fast Ethernet access switch from the Cisco Catalyst 2950 Series, factory preloaded with Standard IOS (SI) baseline feature set, equipped with 48×10/100BASE-TX non-PoE auto-sensing RJ45 copper access ports plus two fixed 10/100/1000BASE-T Gigabit copper uplink ports, fully fixed all-copper chassis. It supports Cisco Switch Clustering multi-switch unified management, delivers 13.6 Gbps non-blocking switching capacity, 8K MAC address table, 802.1Q VLAN, 802.1p CoS QoS, IGMP Snooping, STP and port security, without advanced EI security & traffic control functions. High-density 48-port edge switch with native Gigabit copper uplinks for large enterprise office, education campus and large branch legacy copper LAN deployments, covered by Cisco Limited Lifetime Hardware Warranty.
Click:9 Entry Time:2026-07-09 【Print】 【Close
 © 2026 Kino Technology Limited. All Rights Reserved. | Hong Kong Registered · Shenzhen Operation | New & Genuine Used Network Equipment Supplier 
Links:   白云搜搜   |   未来互联   |   百度   |  
Kino Technology Limited   网站技术支持:未来互联