Cisco IE-5000-12S12P4X-A Full English Product Description

1. Short Sales Title (For Quotation & E-commerce Listing)

2. Official Product Overview

Model Suffix Breakdown

• 12S: Twelve 100/1000 Mbps SFP fiber downlink slots for multimode/single-mode long-distance field fiber connections to remote IEDs, vision stations and distributed production zones
• 12P: Twelve 10/100/1000BASE-T Gigabit PoE+ RJ45 copper ports, IEEE 802.3at compliant, delivering up to 30W per port for AI PTZ cameras, industrial Wi-Fi 6/6E APs, multi-touch HMIs and safety sensors
• 4X: Four universal 1G/10G SFP+ uplink slots supporting both Gigabit and 10-Gigabit transceivers for multi-directional high-throughput backbone trunking and horizontal stacking between IE5000 aggregators
• A: Standard industrial temperature variant, PCB without anti-corrosion conformal coating, optimized for well-ventilated, low-humidity, non-corrosive factory and indoor substation environments; supports standard vented cabinet temperature range only

3. Port & Industrial Hardware Specifications

• 12 × 100/1000 Mbps SFP fiber downlink slots, compatible with industrial wide-temperature SX/LX/ZX/EX SFP transceivers
• 12 × 10/100/1000BASE-T Gigabit PoE+ RJ45 copper ports, auto MDI-X, IEEE 802.3at (30W max per port)
• 4 × universal 1G/10G SFP+ uplink slots, supporting 1000BASE-X and 10GBASE-X transceivers for fiber backbone aggregation and horizontal stacking
• Total PoE+ power budget: Up to 360W with high-wattage redundant power supplies, supporting full 30W output on all 12 copper ports simultaneously
• Power supply: Dual field-replaceable redundant AC/DC power modules, nominal 12–48 VDC SELV, absolute 9.6–60 VDC input range
• Alarm I/O terminal block: 4 isolated digital alarm input channels + 1 Form-C relay fault output (1A@24VDC) for remote monitoring of power loss, overheat and port link failures
• Timing interfaces: GPS antenna port, analog IRIG, digital IRIG-B TTL timing I/O for power substation synchronization
• Console interfaces: 1×RJ45 RS232 serial console + 1×mini-USB local management port for offline configuration and troubleshooting
• Status LED array: Per-port link/activity, PoE delivery status, global system health, dual power supply status, over-temperature fault indicators; dual-sided LED layout for reverse rack mounting visibility
• Mounting options: DIN rail mounting kit included, 19-inch 1RU rack-mount brackets optional
• Thermal design: Fanless passive convection cooling, zero rotating mechanical parts; standard uncoated PCB for ventilated non-corrosive environments
• Industrial compliance certifications: IEC 61850-3, IEEE 1613 Class 2 substation EMC, CE, RoHS, UL Class I Div 2 hazardous location, EN50155 railway certified, IEC 62443 industrial cybersecurity compliant
• Dimensions (W × H × D): 445 mm × 44.45 mm (1RU) × 340 mm
• Weight: 6.2 kg (13.69 lbs)
• Typical idle power consumption: Max 68W (excluding PoE load); peak full PoE load consumption up to 428W

4. Layer 2/3 Switching, Redundancy & Network Advantage Exclusive Features

• Up to 1,005 IEEE 802.1Q tagged VLANs, port-based VLAN segmentation, voice VLAN for industrial intercom VoIP systems
• 8 priority egress queues with Strict Priority / WRR QoS scheduling + IEEE 802.1Qbu TSN frame preemption for prioritizing time-sensitive industrial control traffic
• IEEE 802.3ad LACP static EtherChannel link aggregation for multi-fiber 10G trunk bandwidth expansion, automatic failover and cross-stack stacking support
• IGMP Snooping v1/v2/v3 with built-in IGMP Querier, optimized for fiber-based multi-camera AI surveillance video multicast streams (supports up to 1,000 multicast groups)
• LLDP & LLDP-MED automatic industrial endpoint discovery for PLCs, PoE PTZ cameras, industrial Wi-Fi 6/6E APs and HMIs
• Port mirroring, RSPAN remote port mirroring, RSTP/MSTP spanning tree protocols
• Industrial ring redundancy suite: Cisco REP, MRP, DLR, HSR for sub-50ms zero-failover ring recovery
• Broadcast/multicast/unicast storm control to prevent broadcast storms disrupting production machinery and safety interlock systems
• Native industrial automation protocol suite: EtherNet/IP (CIP), PROFINET v2, Modbus TCP, GOOSE power grid IED synchronization
• Permanent Network Advantage license built-in feature set (upgradeable from base LAN Base):
  1. IEEE 1588v2 PTP transparent & boundary clock precision time synchronization with dedicated timing I/O
  2. Layer 2 NAT for cross-subnet remote site IP address translation (256 subnet translation entries)
  3. Full dynamic IPv4/IPv6 Layer 3 routing: OSPF, EIGRP, BGP, RIPng, PIM Multicast, VRRP, HSRP, BFD, PBR Policy-Based Routing
  4. VRF-Lite virtual routing for industrial network segmentation and traffic isolation
  5. IOx local edge application hosting for OT data logging, local analytics and virtualized industrial tools
  6. Cisco Cyber Vision industrial threat detection, asset inventory and real-time anomaly monitoring
  7. MACsec 256-bit link encryption on all SFP/SFP+ fiber ports for secure long-distance backbone transmission
  8. Cisco TrustSec SGT/SGACL micro-segmentation for industrial zero-trust access control
  9. SD-Access fabric edge node support for unified IT/OT zero-trust networking
  10. Embedded ThousandEyes agent for end-to-end device-to-cloud performance monitoring
• sFlow full traffic monitoring for industrial network latency diagnosis, throughput testing and fault troubleshooting
• Horizontal stacking support for up to four IE5000 aggregators via 10G SFP+ uplink ports

5. Standard Industrial Environmental & Energy-Saving Specifications

• Operating temperature range (A standard uncoated rating, only for ventilated cabinets):
  • Blower-assisted vented enclosures (200 LFM airflow): -40°C to +75°C (-40°F to 167°F)
  • Standard vented cabinets (40 LFM airflow): -40°C to +70°C (-40°F to 158°F)
  • Fully sealed/unventilated cabinets (0 LFM airflow): Not recommended (no conformal coating, risk of corrosion & thermal degradation)
• Short-term peak temperature tolerance: Up to +85°C for maximum 16 hours per IEC environmental testing standard
• Storage temperature range: -40°C to +85°C
• Relative humidity: 5%–95% non-condensing
• Enhanced EMC/EMI surge and noise immunity: Hardened to resist interference from industrial variable frequency drives, heavy motors and welding equipment
• No PCB conformal coating; not suitable for coastal, offshore, mining or high-corrosion sealed cabinet deployments
• IEEE 802.3az EEE Energy Efficient Ethernet to reduce idle port power draw
• Dual redundant AC/DC power inputs eliminate single-point power failure for mission-critical OT networks
• Operating altitude: Up to 4,572 m (15,000 ft) without thermal derating; up to 12,192 m (40,000 ft) with temperature derating

6. Network Advantage IOS Industrial Zero-Trust Security Suite

• Role-based multi-level password protected management access, HTTPS encrypted embedded HTML5 WebUI, SSH secured remote CLI access
• Secure Boot, digital image signing and Cisco Trust Anchor TPM hardware root-of-trust to prevent unauthorized firmware tampering
• IEEE 802.1X port-based authentication, supports local user database + RADIUS/TACACS+ centralized authentication servers
• Hardware-accelerated L2-L4 downloadable ACL traffic filtering to isolate OT control zones and block unauthorized cross-segment communication (1,000 ACE capacity)
• Port security with static MAC address binding and port lockdown for fixed industrial field devices
• Encrypted configuration file storage on swappable SD card, secure profile sync for batch zero-touch mass deployment
• Multi-trigger hardware alarm output for link down, dual power loss, over-temperature threshold crossing and configuration failure events
• Advantage exclusive enhanced security: Identity-based ACLs, encrypted industrial SCADA transport, comprehensive audit logging, full IEC 62443 industrial cybersecurity compliance

7. Comprehensive IOS Network Advantage Management Interfaces

• Full native Cisco IOS CLI for advanced industrial network configuration and deep fault troubleshooting
• Intuitive embedded HTML5 modern WebUI for simplified daily OT maintenance without professional IT expertise
• TFTP/FTP/SD card firmware upgrade with dual redundant OS image partitions to avoid device bricking during updates
• Removable industrial 1GB SD flash card for offline configuration backup, zero-touch device replacement and bulk site deployment
• SNMP v1/v2c/v3 fully compatible with industrial SCADA platforms and third-party unified network monitoring systems
• Open REST APIs and YANG data models for programmatic automation and SCADA integration
• Pre-built industrial Smartport templates for one-click optimized port configuration for PoE PTZ cameras, PLCs, HMIs and industrial wireless APs
• Native integration with Cisco Catalyst Center (DNA Center) and Cisco Industrial Network Director for unified IT/OT topology visualization, horizontal stack management and full lifecycle zero-touch deployment

8. Reliability & Compliance Parameters

• Operating temperature: -40°C ~ +70°C (ventilated cabinet only); Not approved for long-term sealed cabinet deployment
• Storage temperature: -40°C to +85°C
• Mechanical resistance: IEC 60068-2-6 vibration certification, IEC 60068-2-27 shock resistance certified
• Global industrial certifications: CE, UL, RoHS, IEC 61850-3, IEEE 1613 Class 2, Class I Div 2 hazardous location, EN50155 railway, IEC 62443 industrial cybersecurity
• MTBF: 520,000 hours under standard industrial operating conditions (25°C ventilated ambient)
• Warranty: Cisco Limited 5-Year Industrial Hardware Warranty

9. Typical Industrial Deployment Scenarios

• Large manufacturing plant central ventilated aggregation switch: Aggregate long-distance fiber links from distributed production lines, deliver PoE+ power to machine vision cameras, HMIs and safety sensors, with four 10G fiber uplinks to core factory data center; horizontal stacking support for capacity expansion
• Indoor power utility primary substation aggregation node: Compliant with IEC 61850-3, dedicated timing I/O for PTP/GOOSE synchronization, quad 10G uplinks for multi-ring redundant fiber topology connecting grid protection IEDs inside ventilated control buildings
• Intelligent Transportation Systems indoor traffic control cabinet switch: PoE+ ports power traffic PTZ cameras and variable message signs, 12 SFP fiber ports interconnect multiple roadside pole nodes over long single-mode fiber; deployed inside climate-controlled roadside equipment rooms
• Smart factory machine vision central aggregation hub: High PoE budget powers dozens of AI inspection cameras, multi-10G uplinks handle massive real-time video multicast traffic, TSN low-latency forwarding guarantees synchronized motion control and vision data transmission
• Railway indoor traction power substation switch: EN50155 railway certified, aggregates trackside fiber IEDs and PoE passenger surveillance cameras, multi-ring redundancy ensures uninterrupted rail signaling and monitoring

10. Standard Package Contents

Short Commercial Version (For Product Ads & Listing Titles)