Cisco IE-2000-4TC-G Full English Product Description

1. Short Sales Title (For Quotation & E-commerce Listing)

2. Official Product Overview

Model Suffix Breakdown

• 4T: 4×10/100BASE-TX Fast Ethernet RJ45 copper downlink ports, non-PoE unpowered
• C: Combo dual-media uplink ports (each port supports either Gigabit RJ45 copper or Gigabit SFP fiber transceiver)
• G: Gigabit uplink capability, differentiating from FE-only uplink IE-2000 variants
  This industrial switch adopts ruggedized hardware architecture, dual redundant DC power inputs, conformal-coating-ready chassis, extended wide temperature range and high EMC/EMI interference resistance to withstand vibration, dust, humidity and extreme temperature fluctuations in factory cabinets, roadside traffic enclosures and power substation control panels.
  It delivers flexible hybrid uplink options: users can choose short-distance copper Gigabit connections via RJ45 or long-haul fiber interconnection with SFP transceivers to central control room core switches. Running full Cisco IOS LAN Base firmware, it supports complete industrial switching, redundancy, security and automation protocols including REP, PROFINET and EtherNet/IP, ideal for small machine builders, roadside monitoring nodes and distributed IoT control systems without PoE device requirementsCisco.
  Equipped with industrial-grade chipset, 256MB DRAM and 128MB swappable SD flash storage, it provides 7.6 Gbps non-blocking switching capacity and 5.6 Mpps wire-speed forwarding rate for 64-byte frames, optimized low-latency packet buffering ensures stable transmission of real-time PLC control signals and IP surveillance streams. Intelligent variable-speed fan cooling balances thermal performance and noise under heavy traffic loads.

3. Port & Industrial Hardware Specifications

• 4 × 10/100BASE-TX RJ45 Fast Ethernet downlink ports, auto-negotiate 100M/10M, No PoE power delivery
• 2 × Gigabit combo uplink ports (10/100/1000BASE-T RJ45 + SFP shared slot, single media active at one time; SFP takes priority if both links present)
• Compatible SFP transceivers: 1000BASE-SX/LX/ZX, 100BASE-FX industrial optical modules
• Dual redundant 12–57 VDC SELV power terminal inputs for power failure redundancy
• Dedicated alarm relay terminal block for fault output (1A@24VDC / 0.5A@48VDC) to trigger cabinet alarm lights/relays
• Switching Capacity: 7.6 Gbps Non-Blocking
• Forwarding Rate (64-byte packets): 5.6 Mpps
• Memory: 256MB DDR2 DRAM, 128MB removable SD flash card for configuration backup
• MAC Address Table: 8,192 entries; Jumbo Frame support up to 9000-byte MTU
• Console interfaces: RJ45 RS232 serial console + mini-USB for local offline configuration
• Status LEDs: Per-port link/activity LED, system power, fault alarm, dual power input status indicators
• Mounting options: Standard DIN rail mounting, wall/panel mounting brackets compatible
• Thermal design: Variable-speed cooling fan with auto speed adjustment based on internal temperature
• Industrial compliance: IEC 61850-3, IEEE 1613 Class 2 substation EMC, CE, UL, RoHS, Class I Div 2 hazardous location certified
• Dimensions (H × W × D): 130 mm × 80 mm × 115 mm (5.12” × 3.15” × 4.53”)
• Weight: 1.22 kg (2.69 lbs)

4. Full Layer 2 Industrial Switching & Redundancy Functions

• Up to 4096 IEEE 802.1Q tagged VLANs, port-based VLAN, voice VLAN for industrial intercom VoIP
• 8 priority egress queues with Strict Priority / WRR QoS scheduling, prioritizing real-time PLC control, surveillance video and safety sensor data
• IEEE 802.3ad LACP static link aggregation for uplink bandwidth expansion and failover
• IGMP Snooping v1/v2/v3 with built-in Querier, optimized for multi-camera industrial video multicast streams
• LLDP & LLDP-MED automatic endpoint discovery for PLCs, IP cameras and industrial wireless gateways
• Port mirroring, RSPAN remote mirroring, RSTP/MSTP spanning tree, Cisco REP Resilient Ethernet Protocol for ring network zero-failover industrial topology
• Broadcast/multicast/unicast storm control to eliminate broadcast storms disrupting production machinery
• Industrial automation protocol support: EtherNet/IP, PROFINET, Modbus TCP optimization
• sFlow full traffic monitoring for industrial network performance diagnosis and fault troubleshooting

5. Industrial-Grade Security Suite

• Multi-level password protected management, HTTPS encrypted web GUI, SSH encrypted CLI access
• IEEE 802.1X port authentication, local user database + RADIUS/TACACS+ centralized authentication
• Hardware-accelerated L2-L4 ACL traffic filtering to isolate unauthorized industrial device communication
• Port security with static MAC address binding, port lockdown for fixed field equipment
• Secure boot, encrypted configuration storage, SD card secure profile synchronization
• Multi-trigger alarm output for link down, power loss, over-temperature and configuration failure events

6. Rugged Environmental & Energy-Saving Features

• Operating temperature range: -40°C to +70°C (-40°F to 158°F) for vented cabinets; -40°C to +60°C for sealed unventilated enclosures
• Storage temperature: -40°C to +85°C
• Relative Humidity: 5%–95% non-condensing
• High EMC/EMI immunity against industrial inverters, large motors and welding equipment interference
• IEEE 802.3az EEE Energy Efficient Ethernet to reduce idle port power consumption
• Variable fan speed control cuts power draw and operational noise under light traffic loads
• Dual redundant DC power inputs enable seamless switchover if one power supply fails, eliminating single point of power failure

7. Comprehensive IOS Management Interfaces

• Full Cisco IOS CLI for advanced industrial network configuration and troubleshooting
• Intuitive HTML5 web-based device manager GUI for simplified daily operation
• TFTP/FTP firmware upgrade with dual redundant firmware partitions to avoid bricking during upgrades
• Removable SD flash card for offline configuration backup, zero-touch deployment and batch configuration sync
• SNMP v1/v2c/v3 fully compatible with industrial SCADA and third-party unified monitoring platforms
• Pre-built industrial Smartport templates for one-click setup of IP cameras, PLC controllers, industrial APs and intercom devices
• Fully integrated with Cisco Industrial Network Director for unified OT network topology visualization and mass zero-touch deployment

9. Reliability & Compliance Parameters

• Operating Temp: -40°C ~ +70°C (vented cabinet); -40°C ~ +60°C (sealed cabinet)
• Storage Temp: -40°C ~ +85°C
• Mechanical resistance: IEC 60068-2-6 vibration, IEC 60068-2-27 shock certified
• Global certifications: CE, UL, RoHS, IEC 61850-3, IEEE 1613 Class 2, Class I Div 2 hazardous location
• MTBF: 420,000 hours under standard industrial operating conditions
• Warranty: Cisco Limited 5-Year Industrial Hardware Warranty

10. Typical Industrial Deployment Scenarios

• Small machine builder compact cabinet edge switch connecting PLC, barcode readers and monitoring cameras
• Intelligent transportation roadside mini node switch with fiber uplink to traffic control central room
• Solar/wind distributed energy substation edge switch for remote monitoring sensor networking
• Small factory automation production line control network aggregation switch
• Smart building small mechanical floor switch for access control and HVAC monitoring equipment

11. Standard Package Contents

Short Commercial Version (For Product Ads & Listing Titles)