Cisco CBS250-24FP-4G Full English Product Description
1. Short Sales Title (For Quotation & E-commerce Listing)
Cisco CBS250-24FP-4G Business 250 Series 24-Port Full PoE+ Gigabit Smart Managed Switch, 370W High Total PoE Budget, 4 Dedicated 1G SFP Uplink Slots, Dual-Stack IPv4/IPv6 Layer 3 Static Routing, Fanless 1RU Rackmount Switch
2. Official Product Overview
The Cisco CBS250-24FP-4G is the high-power full PoE+ flagship model within Cisco Business 250 Series smart switches, engineered for high-density PoE deployments including multi-lens IP surveillance systems, high-power Wi-Fi 6/6E wireless access points, video VoIP phones and classroom thin clients. Unlike the low-power CBS250-24P-4G (195W PoE budget), this FP variant delivers a full 370W PoE power pool, allowing all 24 copper ports to run at full 30W PoE+ simultaneously without power allocation limitations.
It balances enterprise-grade wire-speed switching, complete Layer 2 feature toolkit, native dual-stack IPv4/IPv6 Layer 3 static routing, multi-layer security and intuitive web management at SMB-friendly cost, consolidating data, voice, video and wireless traffic on a single rack unit.
Equipped with 24 IEEE 802.3at PoE+ Gigabit RJ45 ports plus 4 independent dedicated Gigabit SFP fiber uplink slots, it provides 28 total Gigabit Ethernet interfaces for multi-fiber long-distance uplink expansion. Powered by an 800MHz ARM CPU, 512MB DRAM and 256MB flash storage, it delivers 56 Gbps switching capacity and 41.66 Mpps wire-speed forwarding rate for 64-byte frames, with 1.5MB shared dynamic packet buffer to handle concurrent 4K surveillance streaming, multi-user file transfers and real-time video conferences without congestion.
3. Port & High-Power PoE Hardware Specifications
-
24 × 10/100/1000BASE-T RJ45 ports, fully IEEE 802.3at PoE+ compliant, maximum 30W power output per single port
-
Integrated high-capacity internal power supply, total PoE power budget: 370W Full PoE
-
4 × dedicated Gigabit SFP uplink slots (fiber-only non-combo design)
-
Compatible Cisco SFP transceivers: MGBSX1 multimode, MGBLX1/MGBLH1 single-mode, MGBT1 copper SFP
-
Intelligent PoE management suite: time-based PoE scheduling, real-time per-port power monitoring, short-circuit & overload auto-cutoff protection
-
Switching Capacity: 56 Gbps
-
Forwarding Rate (64-byte packets): 41.66 Mpps
-
Shared Packet Buffer: 1.5 MB
-
MAC Address Table: 8K entries; Jumbo Frame support up to 9000-byte MTU
-
Dual console ports: RJ45 serial console + mini USB port for offline local CLI configuration
-
Front-panel USB Type-A port for offline config backup & firmware upgrade
-
Fanless passive cooling design, zero-noise operation for offices, retail malls and school campuses
-
Universal internal AC power supply: 100–240V 50/60Hz global standard
-
Dimensions: 445 × 345 × 44 mm (17.5 × 13.59 × 1.73 inches)
4. Comprehensive Layer 2 Switching Functions
-
Up to 255 IEEE 802.1Q tagged VLANs, port-based VLAN, voice VLAN, isolated guest VLAN, dedicated management VLAN
-
8 priority egress queues with Strict Priority / WRR QoS scheduling to prioritize VoIP, surveillance video and business data traffic
-
IEEE 802.3ad LACP link aggregation, up to 4 LAG groups with maximum 8 ports per group for bandwidth expansion & link redundancy
-
IGMP Snooping v1/v2/v3, supporting up to 255 multicast groups for IP video surveillance and IPTV
-
LLDP & LLDP-MED automatic endpoint discovery for IP phones, cameras and wireless access points
-
Port mirroring, RSTP/MSTP/PVST+ spanning tree protocols to eliminate Layer 2 broadcast loops
-
Broadcast/multicast/unicast storm control to prevent network flooding failures
5. Native Dual-Stack IPv4 & IPv6 Layer 3 Static Routing
Built-in dual-stack static routing enables direct inter-VLAN communication on the switch, removing dependency on external routers. It supports up to 32 IPv4 static routes, 32 IPv6 static routes and 16 Layer 3 VLAN interfaces, offloading local internal office traffic, reducing core gateway load and lowering latency for multi-department segmented network architectures, ideal for multi-workgroup medium business deployments.
6. Enterprise-Grade Multi-Layer Security Suite
-
IEEE 802.1X port-based authentication with RADIUS centralized access control
-
Port security, static MAC address binding, automatic blocking of unauthorized network terminals
-
DoS attack suppression, multi-layer ACL traffic filtering to block malicious access
-
Encrypted management channels: HTTPS web GUI, SSH CLI, SNMPv3 secure remote monitoring
-
Syslog event logging, built-in cable diagnostic tools, mandatory password complexity policy
-
Independent guest network isolation to protect internal confidential business data
7. Energy-Saving Green Technologies
-
IEEE 802.3az Energy Efficient Ethernet (EEE): auto power reduction for idle Ethernet links
-
Dynamic power tuning based on cable length to cut unnecessary power loss
-
Port LED dimming or full shutdown mode for unmanned wiring closets
-
Time-based PoE auto power on/off to eliminate idle power consumption after working hours
-
Low-power fanless hardware design with minimal heat generation and extended service lifespan
8. Multi-Mode Local & Remote Management
-
Intuitive graphical web management interface (HTTP/HTTPS) with basic & advanced operation modes
-
Dual offline local console access: serial RJ45 + mini USB port for CLI configuration
-
SSH secure remote command line management
-
SNMP v1/v2c/v3 compatible with third-party network monitoring platforms
-
TFTP / offline USB firmware upgrade, SNTP time synchronization, ping & traceroute diagnostic tools
-
Single IP management for centralized batch control of multiple CBS250 series switches
-
Fully compatible with Cisco Business Dashboard & Cisco Business Mobile App for unified topology visualization and one-click batch configuration
9. Physical & Environmental Parameters
-
Form Factor: 1RU standard rackmount chassis, support rack mount, wall mount and desktop placement
-
Operating Temperature: 0°C to 40°C; Storage Temperature: -20°C to 70°C
-
Global compliance standards: CE, RoHS
-
Warranty: Cisco Limited Lifetime Hardware Warranty
10. Typical Deployment Scenarios
-
High-density full PoE surveillance systems for shopping malls, factories and office buildings with dozens of 4K IP cameras
-
Full Wi-Fi coverage networks deploying high-power Wi-Fi 6/6E PoE access points
-
Unified voice-data office networks with mass PoE VoIP desk phones
-
School classroom centralized power supply for thin clients and wireless APs
-
Medium business core distribution switch with 4-fiber SFP uplinks to headquarters or remote branches
-
Multi-VLAN segmented enterprise network leveraging dual-stack Layer 3 static routing
11. Standard Package Contents
1 × Cisco CBS250-24FP-4G High-Power Full PoE+ Smart Gigabit Switch
1 × Global standard AC power cord
Rack mounting brackets and installation screws
Quick Start Guide & global regulatory compliance documents
Short Commercial Version (For Product Ads & Listing Titles)
The Cisco CBS250-24FP-4G is a high-power full PoE+ 24-port Gigabit smart managed switch equipped with a 370W total PoE budget and 4 dedicated Gigabit SFP fiber uplink ports. Featuring dual-stack IPv4/IPv6 Layer 3 static routing, enterprise QoS, full multi-layer security and fanless silent design, it delivers stable wire-speed data and sufficient full power for high-power IP cameras, Wi-Fi 6 APs and VoIP phones in high-density surveillance, education and medium business environments, supporting rack/wall/desktop deployment, energy-saving hardware and Cisco limited lifetime warranty.
|
