Cisco Catalyst C1000-8FP-2G-L Full English Product Description

1. Product Overview

2. Hardware Port Specifications

• Downlink Ports: 8 × auto-sensing 10/100/1000BASE-T RJ45 PoE+ ports, fully compliant with IEEE 802.3af (15.4W max per port) & IEEE 802.3at (30W max per port)
• Total PoE Power Budget: 120W, supports full 8-port concurrent PoE+ operation without power rationing
• Uplink Interfaces: 2 × 1G SFP + RJ45 combo ports; each uplink supports copper Gigabit cable or 1G fiber SFP transceivers for long-distance inter-switch uplink extension
• Management Interfaces: Front RJ45 serial console, USB-A storage port, built-in Bluetooth 4.0 for wireless CLI login
• LED Indicators: Independent status LEDs for system health, port link/activity, transmission speed and real-time PoE power consumption
• Hardware Reset Button: One-touch instant device reboot and full factory configuration restoration
• Cooling Architecture: Fanless passive heat sink design with zero operational noise
• Power Feature Note: Integrated internal AC power supply (non-external PSU design, no "-E" suffix)

3. Core Performance Parameters

• Switching Capacity: 20 Gbps non-blocking wire-speed performance
• 64-byte Packet Forwarding Rate: 14.88 Mpps
• Processor: ARM v7 800 MHz CPU
• System Memory: 512 MB DDR4 DRAM, 256 MB Flash storage
• MAC Address Table Capacity: 8,000 MAC entries
• Jumbo Frame Support: Up to 10,000 bytes for large video and file transmission
• Max Full PoE Load Power Consumption: ~142 W
• Idle standby power draw: ~18 W
• Input Power: Built-in internal universal PSU, input range 100–240 V AC, 50/60 Hz

4. Physical & Environmental Specifications

• Form Factor: Half-width 1RU rack-mount metal chassis, desktop placement supported
• Dimensions (W × D × H): 268 mm × 324 mm × 44 mm (10.56 × 12.73 × 1.73 inches), deeper chassis to accommodate high-power internal PoE power module
• Net Weight: 1.82 kg (4.01 lb)
• Operating Temperature Range: 0 °C to 40 °C (32 °F to 104 °F)
• Storage Temperature Range: -25 °C to 70 °C (-13 °F to 158 °F)
• Relative Humidity: 10%–90% non-condensing humidity for operation and storage
• Compliance Certifications: CE, FCC, UL, RoHS compliant; Cisco limited lifetime hardware warranty

5. Complete Layer 2 Switching Functions

• IEEE 802.1Q VLAN, supports up to 4094 VLAN IDs, Voice VLAN and Guest VLAN logical traffic segmentation
• Full spanning tree protocol suite: STP, RSTP, MSTP, PVST+, Rapid PVST+; BPDU Guard, Root Guard to eliminate Layer 2 broadcast loops
• Link Aggregation: IEEE 802.3ad LACP + static LAG groups for bandwidth aggregation
• Multicast Optimization: IGMP Snooping v1/v2/v3 to reduce bandwidth waste for IPTV and mass surveillance video streams
• Auxiliary L2 Management Tools: SPAN port mirroring, cable diagnostics, port isolation, broadcast/multicast/unicast storm control, automatic port power saving on link down

6. Intelligent Full PoE Power Management

• Per-port PoE priority scheduling to guarantee power supply for critical cameras and wireless APs under power overload
• Custom PoE time schedule to automatically cut power for off-hours terminals and reduce energy consumption
• Real-time single-port & total PoE power statistics monitoring via Web GUI and CLI
• Multi-layer hardware protection: Short-circuit, over-current, over-voltage and over-temperature safeguards for all 8 PoE RJ45 ports
• Persistent PoE power retention during switch reload to avoid outage of critical surveillance devices

7. Enterprise Network Security Suite

• 802.1X port-based authentication, MAC authentication, RADIUS/TACACS+ remote identity verification
• Port Security with configurable MAC address quantity limits to block unauthorized unknown terminals
• IPv4 Access Control Lists for precise inbound/outbound traffic filtering
• Encrypted management channels: SSHv2, HTTPS, SNMPv3; plain-text Telnet disabled by factory default
• Anti-spoofing protection: Dynamic ARP Inspection, IP Source Guard, DHCP Snooping
• Firmware integrity verification and encrypted configuration file storage to prevent network tampering

8. QoS Intelligent Traffic Prioritization

• 4 independent hardware priority queues per physical port
• Full 802.1p CoS classification and DSCP marking remapping
• Port-based ingress/egress bandwidth rate limiting and traffic shaping
• Dedicated high-priority queue for VoIP voice and real-time surveillance video to minimize latency and jitter

9. Multi-Mode Management & Deployment

• Local Management: Intuitive web-based graphical UI, text CLI accessible via RJ45 console, USB-A flash drive or Bluetooth wireless connection
• Firmware & Configuration Management: Multi-channel upgrade via USB-A flash drive, TFTP, HTTP/HTTPS; one-click bulk config backup & restore
• Network Monitoring Tools: SNMPv3, NTP time synchronization, sFlow traffic sampling
• Zero-touch provisioning (ZTP) supported for simplified bulk deployment across multi-site branch networks
• Standalone operation only; no hardware stacking capability

10. Typical Application Scenarios

• Small retail shops & convenience stores deploying full-power Wi-Fi 6 APs and multiple PoE IP cameras
• School classroom and library surveillance pods requiring full 30W power per camera port
• Compact satellite branch offices with high-density low-port PoE wireless coverage
• Small medical clinics and quiet office environments with fanless silent operation
• Remote IoT surveillance aggregation with flexible fiber/copper uplink options
• Entry-level small business PoE network where every port needs full PoE+ power output

E-commerce Short Sales Title