Cisco Catalyst C1300X-24NGU-4X Full English Product Description
1. Product Overview
The Cisco Catalyst C1300X-24NGU-4X is a fanless advanced managed hybrid multi-gigabit non-PoE Layer 3 switch from premium Catalyst 1300X Series, designed for modern SMB offices, enterprise branch networks, school labs, retail spaces and media workgroups with mixed 1G and 5G endpoints. It features a hybrid port mix: 16×1G copper ports plus 8×5G Multi-Gigabit RJ45 ports, paired with 4×SFP28 high-speed uplink slots supporting 10G regular uplink and 25G high-bandwidth stacking. Equipped with native OSPF dynamic routing, silent passive fanless cooling, full enterprise security suite, intelligent QoS and unified Cisco cloud management, this hybrid multi-gig switch balances cost efficiency and high bandwidth for mixed deployment of regular workstations, NAS storage and Wi‑Fi 6/6E non‑PoE access points without PoE power requirementsCisco.
2. Hardware Port Specifications
-
Downlink Ports: 24 hybrid RJ45 non‑PoE ports (NGU = Non‑PoE Hybrid Multi‑Gig)
-
16 × 10/100/1000BASE‑T Gigabit copper ports for standard workstations
-
8 × 10/100/1000/2500/5000BASE‑T 5G Multi‑Gig ports for high‑speed wireless APs and storage devices
-
All copper ports work over existing Cat5e/Cat6 cabling
-
Uplink Interfaces: 4 × SFP28 slots
-
Operate at 10 Gbps for regular fiber uplink to core switches
-
Support up to 25 Gbps exclusively when configured as hardware stacking links
-
Dual Management Consoles: Front‑panel RJ45 serial console + USB‑C dual console for local CLI configuration
-
USB‑C Storage Port: Supports offline firmware upgrade and one‑click configuration backup & restoration
-
LED Indicators: Independent status LEDs for system health, port link/activity, port speed classification
-
Hardware Reset Button: Quick device reboot and complete factory configuration reset
-
Cooling Architecture: Fanless passive heat sink design with zero running noise for quiet offices, classrooms and medical environments
-
Critical Note: Zero PoE power budget; all downlink ports carry data only, no power delivery to endpointsCisco
3. Core Performance Parameters
-
Switching Capacity: 192 Gbps non‑blocking wire‑speed switching
-
64‑byte Packet Forwarding Rate: 142.85 Mpps
-
Shared Packet Buffer Memory: 1.5 MB
-
Processor: Dual‑core ARM 1.4 GHz CPU
-
System Memory: 1 GB DDR4 DRAM, 512 MB Flash storage
-
MAC Address Table Capacity: 16,000 MAC entries
-
Jumbo Frame Support: Up to 10,000 bytes for large video and file transmission
-
Max Power Consumption: 25 W; Idle standby power draw: ~6.8 W
-
Stacking Compatibility: Stack up to 8 C1300X Series switches in ring/chain topology with unified single‑IP management plane
4. Physical & Environmental Specifications
-
Form Factor: Standard 1RU rack‑mount metal chassis, desktop placement optional
-
Dimensions (W × D × H): 445 mm × 240 mm × 44 mm (17.5 × 9.45 × 1.73 inches)
-
Net Weight: 3.18 kg (7.01 lb)
-
Built‑in Power Supply: Universal internal power module, input range 100–240 V AC, 50/60 Hz
-
Operating Temperature Range: 0 °C to 50 °C (32 °F to 122 °F)
-
Storage Temperature Range: -25 °C to 70 °C (-13 °F to 158 °F)
-
Relative Humidity: 10%–90% non‑condensing humidity for operation and storage
-
Compliance Certifications: CE, FCC, UL, RoHS compliant; Cisco limited lifetime hardware warranty with advance replacement service
5. Complete Layer 2 Switching Functions
-
IEEE 802.1Q VLAN, up to 4094 VLAN IDs supported; Voice VLAN, Guest VLAN, MAC/protocol/subnet‑based VLAN classification
-
Full spanning tree suite: STP (802.1D), RSTP (802.1W), MSTP (802.1S), PVST+, Rapid PVST+; BPDU Guard, Root Guard, Loop Guard to eliminate Layer 2 broadcast loops
-
Link Aggregation: IEEE 802.3ad LACP + static LAG; cross‑stack LAG fully supported for stacked C1300X units
-
Multicast optimization: IGMP Snooping v1/v2/v3, MLD Snooping for IPv6 IPTV and mass video surveillance streams
-
Auxiliary L2 tools: Port mirroring, cable diagnostics, port isolation, broadcast/multicast/unicast storm control, auto port power saving on link down
6. Exclusive Advanced Lite Layer 3 Routing (C1300X Series Only)
-
Static IPv4 & IPv6 Inter‑VLAN Routing for logical internal network segmentation
-
Native OSPFv2 / OSPFv3 dynamic routing protocol for complex multi‑branch network topologies with fast route convergence
-
Integrated DHCP Server and DHCP Relay Agent for automatic endpoint IP assignment
-
Bidirectional IPv4/IPv6 ACL routing policies for granular inbound/outbound traffic filtering
-
Native IPv4/IPv6 dual‑stack operation compatible with mixed modern network environments
7. Enterprise‑Grade Network Security Suite
-
802.1X port authentication, MAC‑based authentication, web authentication, RADIUS/TACACS+ remote identity verification
-
Port Security: Configurable MAC address limits and violation response rules to block unauthorized unknown devices
-
Precise IPv4 & IPv6 Access Control Lists for fine‑grained traffic filtering
-
Encrypted management channels: SSHv2, HTTPS, SNMPv3; plain‑text Telnet disabled by factory default
-
Anti‑spoofing defense: Dynamic ARP Inspection, IP Source Guard, DHCP Snooping to mitigate ARP and IP spoofing attacks
-
Encrypted configuration files and firmware integrity verification to prevent network tampering
8. QoS Intelligent Hybrid Multi‑Gig Traffic Prioritization
-
8 independent hardware priority queues per physical port
-
Full 802.1p CoS classification and DSCP marking remapping
-
Port‑based ingress/egress bandwidth shaping and rate limiting to avoid bandwidth congestion on 5G multi‑gig ports
-
Dedicated highest‑priority queue for VoIP voice and real‑time surveillance video to minimize latency and jitter
9. Enhanced Deployment & Multi‑Mode Management
-
High‑Bandwidth Hardware Stacking: Supports stacking up to 8 Catalyst 1300X Series switches via ring/chain topology, unified single‑IP management plane, hot‑swap stack member replacement and fast stack failover with up to 25G inter‑stack throughput
-
Local management: Intuitive web‑based graphical GUI, text CLI via RJ45 or USB‑C console port
-
Remote centralized cloud management: Cisco Business Dashboard platform + Cisco Business Mobile App for unified multi‑site monitoring and maintenance
-
Zero‑touch provisioning (ZTP) for fast bulk deployment across distributed branch networks
-
Multi‑channel firmware upgrade: USB‑C flash drive, TFTP, HTTP/HTTPS; one‑click bulk configuration backup & restore
10. Typical Application Scenarios
-
Hybrid bandwidth office access layer: 1G ports for staff PCs, 5G multi‑gig ports for Wi‑Fi 6/6E wireless APs
-
School computer labs with mixed regular workstations and high‑speed NAS storage clusters
-
Retail chains and shopping malls deploying dense multi‑gig wireless access without PoE demand
-
Media editing studios requiring mixed 1G office terminals and 5G high‑bandwidth video workstations
-
Enterprise branch secondary aggregation with high‑speed 10G fiber uplink and high‑performance stacking
-
Quiet education, medical and open‑plan office environments requiring fanless silent operation
E‑commerce Short Sales Title
Cisco Catalyst C1300X-24NGU-4X | 24-Port Hybrid 1G+5G Multi-Gig Managed Non-PoE Switch (16×1G + 8×5G), 4×SFP28 10G/25G Uplinks, Fanless Silent Advanced Lite Layer3 with OSPF, High-Bandwidth Stackable 1RU Enterprise Workgroup Switch
|