Cisco Catalyst C1300X-10NU-2X Full English Product Description

1. Product Overview

2. Hardware Port Specifications

• Downlink Ports: 10 × Multi-Gigabit 10/100/1000/2500/5000BASE-T RJ45 copper ports (NU = Non-PoE Multi-Gig), compatible with Cat5e/Cat6 cabling for 5G transmission
• Uplink Interfaces: 2 × SFP28 25G fiber slots, backward compatible with 10G SFP+ and 1G SFP transceivers for ultra-high-bandwidth uplink aggregation to core switches
• Dual Management Consoles: Front RJ45 serial console + USB Type-C dual console for local CLI configuration
• USB-C Storage Port: Supports offline firmware upgrade and one-click configuration backup & restoration
• LED Status Indicators: Independent LEDs for system status, port link/activity, multi-gigabit speed identification
• Hardware Reset Button: Instant device reboot and complete factory configuration reset
• Cooling Architecture: Fanless passive heat sink design, zero operational noise for quiet indoor environments
• Note: This model has zero PoE power budget, exclusively designed for non-powered multi-gigabit endpoints

3. Core Performance Parameters

• Switching Capacity: 100 Gbps non-blocking wire-speed performance
• 64-byte Packet Forwarding Rate: 74.4 Mpps
• Shared Packet Buffer Memory: 1.5 MB
• Processor: Dual-core ARM 1.4 GHz CPU
• System Memory: 1 GB DDR4 DRAM, 512 MB Flash storage
• MAC Address Table Capacity: 16,000 MAC entries
• Jumbo Frame Support: Up to 10,000 bytes for large video and file transmission
• Max Power Consumption: 22 W; Idle standby power draw: ~8 W
• Enhanced Stacking Bandwidth: Higher inter-stack throughput than standard Catalyst 1300 models for stacked multi-unit deploymentsCisco

4. Physical & Environmental Specifications

• Form Factor: Compact half-rack width 1RU rack-mount chassis, supports wall mounting and desktop placement
• Dimensions (W × D × H): 268 mm × 308 mm × 43.94 mm (10.55 × 12.13 × 1.73 inches)Cisco
• Net Weight: 2.1 kg (4.63 lb)
• Built-in Power Supply: Universal internal power module, input range 100–240 V AC, 50/60 Hz
• Operating Temperature Range: 0 °C to 50 °C (32 °F to 122 °F)
• Storage Temperature Range: -25 °C to 70 °C (-13 °F to 158 °F)
• Relative Humidity: 10%–90% non-condensing humidity for operation and storage
• Compliance Certifications: CE, FCC, UL, RoHS compliant; Cisco limited lifetime hardware warranty with RTF replacement service

5. Complete Layer 2 Switching Functions

• IEEE 802.1Q VLAN, supports up to 4094 VLAN IDs; Voice VLAN, Guest VLAN, MAC/protocol/subnet-based VLAN classification
• Full spanning tree suite: STP (802.1D), RSTP (802.1W), MSTP (802.1S), PVST+, Rapid PVST+; BPDU Guard, Root Guard, Loop Guard to eliminate Layer 2 broadcast loops
• Link Aggregation: IEEE 802.3ad LACP + static LAG; cross-stack LAG fully supported for stacked 1300X units
• Multicast optimization: IGMP Snooping v1/v2/v3, MLD Snooping for IPv6 IPTV, surveillance and media streaming
• Auxiliary L2 tools: Port mirroring, cable diagnostics, port isolation, broadcast/multicast/unicast storm control, auto port power saving on link down

6. Lite Layer 3 Routing Capabilities

• Static IPv4 & IPv6 Inter-VLAN Routing for logical internal network segmentation
• Integrated DHCP Server and DHCP Relay Agent for automatic endpoint IP assignment
• Bidirectional IPv4/IPv6 ACL routing policies for granular inbound/outbound traffic filtering
• Native IPv4/IPv6 dual-stack operation compatible with modern mixed-protocol networks

7. Enterprise-Grade Network Security Suite

• 802.1X port-based authentication, MAC-based authentication, RADIUS/TACACS+ remote identity verification
• Port Security: Configurable MAC address limits and violation response rules to block unauthorized unknown devices
• Precise IPv4 & IPv6 Access Control Lists for fine-grained traffic filtering
• Encrypted management channels: SSHv2, HTTPS, SNMPv3; plain-text Telnet disabled by factory default
• Anti-spoofing defense: Dynamic ARP Inspection, IP Source Guard to mitigate ARP and IP spoofing attacks
• Encrypted configuration files and firmware integrity verification to prevent network tampering

8. QoS Intelligent Multi-Gig Traffic Prioritization

• 8 independent hardware priority queues per physical port
• Full 802.1p CoS classification and DSCP marking remapping
• Port-based ingress/egress bandwidth shaping and rate limiting to avoid multi-gig bandwidth congestion
• Dedicated highest-priority queue for VoIP voice and real-time video traffic to minimize latency and jitter

9. Deployment & Multi-Mode Management

• High-Bandwidth Hardware Stacking: Supports stacking up to 8 Catalyst 1300X Series switches in ring/chain topology, unified single-IP management plane, hot-swap stack member replacement and fast stack failover with upgraded inter-stack throughputCisco
• Local management: Intuitive web-based graphical GUI, text CLI via RJ45 or USB-C console port
• Remote centralized cloud management: Cisco Business Dashboard platform + Cisco Business Mobile App for unified multi-site monitoring and maintenance
• Zero-touch provisioning (ZTP) for fast bulk deployment across distributed branch networks
• Multi-channel firmware upgrade: USB-C flash drive, TFTP, HTTP/HTTPS; one-click bulk configuration backup & restore

10. Typical Application Scenarios

• Compact branch office multi-gig workstation access with NAS storage connectivity
• School classroom and library high-speed workgroup network
• Retail stores, kiosks and small commercial spaces with 5G wireless AP deployment
• Mini server room compact aggregation layer with 25G fiber uplink to core
• Quiet office, medical and education environments requiring fanless silent operation
• Small-scale video editing workstation cluster with multi-gig bandwidth demand

E-commerce Short Sales Title