Cisco Catalyst C1300-48FP-4G Full English Product Description

1. Product Overview

2. Hardware Port Specifications

• Downlink Ports: 48 × auto-sensing 10/100/1000BASE-T RJ45 PoE+ ports, fully compliant with IEEE 802.3af (PoE, max 15.4W/port) & IEEE 802.3at (PoE+, max 30W/port)
• Total PoE Power Budget: 740W, supports full 48-port concurrent PoE+ deployment without power shortage
• Uplink Interfaces: 4 × Gigabit SFP slots, compatible with 1G fiber transceivers and copper SFP modules for long-distance fiber aggregation to core switches
• Dual Management Consoles: Front-panel RJ45 serial console + USB Type-C console port for local CLI configuration
• USB-C Storage Port: Onboard USB-C slot for one-click firmware upgrade and configuration file backup/restore
• LED Indicators: Separate status LEDs for system health, port link/activity, transmission speed and real-time PoE power status
• Hardware Reset Button: Supports instant device reboot and complete factory configuration reset
• Cooling Design: Passive fanless heat sink structure, zero running noise, suitable for noise-sensitive environments

3. Core Performance Parameters

• Switching Capacity: 104 Gbps
• 64-byte Packet Forwarding Rate: 77.38 Mpps
• Shared Packet Buffer Memory: 3 MB
• Processing Chip: Dual-core ARM 1.4 GHz CPU
• System Memory: 1 GB DDR4 DRAM, 512 MB Flash storage
• MAC Address Table Capacity: 16,000 MAC entries
• Jumbo Frame Support: Up to 10,000 bytes for large file transmission
• Max Total Power Consumption: 886.42 W under full PoE load
• Standby Idle Power Draw: ~45 W

4. Physical & Environmental Specifications

• Form Factor: Standard 1RU rack-mountable chassis, desktop placement optional
• Dimensions (W × D × H): 445 mm × 350 mm × 44 mm (17.5 × 13.78 × 1.73 inches)
• Net Weight: 5.82 kg (12.83 lb)
• Built-in Power Supply: Universal internal power module, input range 100–240 V AC, 50/60 Hz
• Operating Temperature: 0 °C to 50 °C (32 °F to 122 °F)
• Storage Temperature: -25 °C to 70 °C (-13 °F to 158 °F)
• Relative Humidity: 10%–90% non-condensing humidity for operation and storage
• Cabling Standard: Cat5e or higher UTP cables required for stable Gigabit copper transmission
• Certifications: CE, FCC, UL, RoHS compliant, Cisco limited lifetime warranty

5. Full Layer 2 Switching Functions

• IEEE 802.1Q VLAN, up to 4094 VLAN IDs supported; Voice VLAN, Guest VLAN, MAC/protocol/subnet-based VLAN classification
• Complete spanning tree suite: STP (802.1D), RSTP (802.1W), MSTP (802.1S), PVST+, Rapid PVST+; BPDU Guard, Root Guard, Loop Guard to eliminate layer 2 loops
• Link Aggregation: IEEE 802.3ad LACP + static LAG; up to 8 aggregation groups, max 8 ports per group, cross-stack LAG available for stacked units
• Multicast optimization: IGMP Snooping v1/v2/v3, MLD Snooping for IPv6 IPTV and mass IP camera video streams
• Auxiliary L2 tools: Port mirroring, cable diagnostics, port isolation, broadcast/multicast/unicast storm control

6. Lite Layer 3 Routing Capabilities

• Static IPv4 & IPv6 Inter-VLAN Routing for internal network segmentation
• Integrated DHCP Server and DHCP Relay Agent to simplify endpoint IP allocation
• Bidirectional IPv4/IPv6 ACL routing policies for granular traffic filtering
• Native IPv4/IPv6 dual-stack network management for mixed modern network deployments

7. Intelligent Full PoE Power Management

• Per-port PoE priority scheduling: Critical devices (APs, cameras) get power priority during power overload
• Custom PoE time schedule: Auto power cut for off-hours terminals to reduce energy waste
• Real-time PoE power monitoring via Web GUI and CLI: Check single-port and total power consumption
• Multi-layer hardware protection: Short-circuit, over-current, over-voltage and over-temperature safeguards for all PoE RJ45 ports

8. Enterprise-Grade Network Security Suite

• 802.1X port authentication, MAC-based authentication, RADIUS/TACACS+ remote identity verification
• Port Security: Configurable MAC address limit and violation response rules to block unauthorized devices
• IPv4 & IPv6 Access Control Lists for precise inbound/outbound traffic filtering
• Encrypted management channels: SSHv2, HTTPS, SNMPv3; plain-text Telnet disabled by default
• Anti-spoofing defense: Dynamic ARP Inspection, IP Source Guard to resist ARP and IP spoofing attacks
• Encrypted configuration files and firmware integrity verification to prevent tampering

9. QoS Traffic Prioritization

• 8 independent hardware priority queues per physical port, combining WRR weighted round-robin and strict priority scheduling
• Full 802.1p CoS classification and DSCP marking remapping
• Port-based ingress/egress bandwidth shaping and rate limiting to avoid bandwidth congestion
• Dedicated highest-priority queue for VoIP voice and real-time surveillance video to minimize latency and jitter

10. Deployment & Multi-Mode Management

• Hardware Stacking: Supports stacking up to 8 C1300 series switches via ring/chain topology, unified single-IP management plane, hot-swap stack member replacement and fast stack failover
• Local management: Intuitive web-based graphical GUI, text CLI via RJ45 or USB-C console
• Remote centralized cloud management: Cisco Business Dashboard platform + Cisco Business Mobile App for multi-site unified monitoring
• Zero-touch provisioning (ZTP) for fast bulk deployment across distributed branch networks
• Multi-channel firmware upgrade: USB-C flash drive, TFTP, HTTP/HTTPS; one-click bulk configuration backup & restore

11. Typical Application Scenarios

• Large-scale campus surveillance network with dozens of PoE IP cameras
• Office building dense Wi-Fi 6/6E AP deployment requiring full PoE+ power
• Hotel, shopping mall and retail store integrated voice, wireless and video monitoring network
• School classroom, library and lecture hall noise-free PoE access layer
• Enterprise branch office high-density PoE access aggregation with fiber uplink

E-commerce Short Sales Title