Cisco Catalyst C1300-24FP-4X Full English Product Description
1. Product Overview
The Cisco Catalyst C1300-24FP-4X is a fully managed Layer 2 & Lite Layer 3 Gigabit Ethernet PoE+ access switch belonging to the Cisco Catalyst 1300 Series, designed for small and medium businesses, enterprise branch offices, retail, hospitality and campus wired networks. It integrates 24 full PoE+ Gigabit downlink ports with high-speed 10G SFP+ fiber uplinks, delivering stable high-bandwidth forwarding, abundant PoE power supply, comprehensive security, QoS and centralized network management functions, replacing legacy CBS350 switches as Cisco’s next-generation SMB enterprise access switching solution.
2. Core Hardware Port Specifications
-
Downlink Ports: 24 × 10/100/1000BASE-T RJ45 PoE+ ports, IEEE 802.3af (PoE, max 15.4W per port) & IEEE 802.3at (PoE+, max 30W per port) compliant
-
Total PoE Power Budget: 375W, supporting full 24-port simultaneous PoE+ deployment for IP cameras, Wi-Fi 6/6E access points, VoIP phones and thin clients
-
Uplink Interfaces: 4 × 10 Gigabit SFP+ slots, compatible with 10G fiber transceivers, 1G SFP modules for flexible uplink aggregation
-
Management Interfaces: Front-panel RJ45 console port + USB Type-C dual console for local CLI configuration; USB-C storage port for firmware upgrade & configuration file backup
-
Status Indicators: Dedicated LED arrays for System status, Port Link/Activity, PoE power supply and Port Speed identification
-
Reset Button: Multi-mode hardware reset for port PoE test, device reboot and factory default restoration
3. Performance & Hardware Platform
-
Switching Capacity: 128 Gbps
-
Packet Forwarding Rate (64-byte frame): 95.23 Mpps
-
Packet Buffer Memory: 1.5 MB
-
Processing Unit: Dual-core ARM CPU running at 1.4 GHz
-
System Memory: 1 GB DDR4 DRAM, 512 MB Flash storage
-
MAC Address Table Capacity: 16,000 MAC entries
-
Supported Frame Size: Standard Ethernet frame + Jumbo frame up to 10,000 bytes
4. Physical & Environmental Parameters
-
Form Factor: 1RU rack-mountable chassis
-
Dimensions (W × D × H): 445 mm × 345 mm × 44 mm (17.5 × 13.59 × 1.73 inches)
-
Net Weight: 4.6 kg (10.14 lb)
-
Power Supply: Built-in universal internal power module, input 100–240 V AC, 50/60 Hz
-
Operating Temperature: 0 °C to 50 °C (32 °F to 122 °F)
-
Storage Temperature: -25 °C to 70 °C (-13 °F to 158 °F)
-
Humidity: 10%–90% non-condensing relative humidity for operation & storage
-
Cabling Requirement: Cat5e or higher UTP cables for 1G copper transmission
5. Layer 2 & Lite Layer 3 Functional Features
Layer 2 Switching
-
IEEE 802.1Q VLAN, up to 4094 VLAN IDs, Voice VLAN & Guest VLAN isolation
-
Static & Dynamic 802.1X Port Authentication, MAC-based authentication
-
STP/RSTP/MSTP loop prevention, BPDU guard, Root guard
-
Link Aggregation (LACP & Static LAG), cross-stack LAG support for stacked deployments
-
Port Mirroring, Cable Diagnostics, IGMP Snooping v1/v2/v3 for multicast video stream optimization
Lite Layer 3 Routing
-
Static IP Routing, Inter-VLAN Routing
-
DHCP Server/Relay, IPv4/IPv6 dual-stack management
-
Basic ACL routing policies for traffic segmentation
6. PoE Intelligent Power Management
-
Per-port PoE priority scheduling for power overload protection
-
PoE scheduling to cut power supply during off-peak hours
-
Real-time PoE power consumption monitoring via Web UI & CLI
-
Short-circuit, over-current, over-voltage hardware protection for all PoE ports
7. Network Security Suite
-
Port security with MAC address limit & violation action
-
IPv4/IPv6 Access Control Lists (ACL) for inbound & outbound traffic filtering
-
802.1X authentication, RADIUS/TACACS+ remote authentication
-
SSHv2, HTTPS, SNMPv3 encrypted management, disable plain-text Telnet
-
Storm control for broadcast/multicast/unicast traffic suppression
-
ARP inspection, IP source guard to defend against LAN spoofing attacks
8. Quality of Service (QoS)
-
8 hardware priority queues per port, 802.1p CoS & DSCP marking mapping
-
Port-based traffic shaping, rate limiting, bandwidth reservation
-
Voice & video traffic priority queue for VoIP and IP surveillance networks
9. Management & Deployment
-
Local management: Web-based Graphical User Interface (GUI), CLI console via RJ45/USB-C
-
Remote centralized management: Cisco Business Dashboard cloud platform, Cisco Business Mobile App
-
Firmware upgrade via USB-C, TFTP, HTTP/HTTPS
-
Device stacking support with ring/chain topology, hot-swap stack member replacement, fast stack failover
-
Zero-touch provisioning for simplified bulk deployment in multi-site branches
10. Typical Application Scenarios
-
Enterprise office access layer with dense Wi-Fi AP and IP camera deployment
-
Hotel, mall, retail store wired PoE network
-
Small campus building access aggregation with 10G fiber uplink to core switch
-
Multi-branch SMB network with centralized cloud management
Short Sales Slogan (For Listing Title)
Cisco Catalyst C1300-24FP-4X | 24-Port Full PoE+ Gigabit Managed Switch, 375W PoE Budget, 4×10G SFP+ Uplinks, Layer2/Lite Layer3 Enterprise Access Switch
|