Full English Description for Cisco C1300-8MGP-2X
1. Part Number Naming Breakdown
-
C1300: Cisco Catalyst 1300 series enterprise-managed Layer 3 multi-speed PoE switch platform for SMB, high-bandwidth edge, retail surveillance, Wi-Fi 6/6E AP deployments and mini-branch unified voice-data-video networks, featuring hardware stacking, dual-stack IPv4/IPv6 and dynamic routing support
-
8: Total 8 PoE-capable twisted-pair downlink ports, mixed 4×1G + 4×2.5G multi-rate copper interfaces
-
MGP: Multi-Gigabit Full PoE+ model; all 8 RJ45 ports support IEEE 802.3af / 802.3at PoE+, total integrated 120W full PoE power budget, every port can deliver up to 30W simultaneously
-
2X: Two independent dedicated 10-Gigabit SFP+ high-speed uplink slots (native 10G fiber uplinks, backward compatible with Gigabit SFP transceivers, no shared combo RJ45 interface)
-
Form factor: Compact half-width 1U rack/wall-mount fanless passive cooling chassis with integrated internal AC power supply; Software stack: Complete enterprise Layer 2 feature suite + static IPv4/IPv6 Layer 3 routing + RIP v1/v2 / RIPng dynamic routing + hardware stacking capability
2. Short Sales One-Liner (For BOM, Quotation & Datasheet Header)
Cisco Catalyst C1300-8MGP-2X, silent fanless compact half-width managed Layer 3 multi-Gigabit full PoE+ switch with 4×1G + 4×2.5G PoE+ RJ45 access ports (120W total full PoE budget) and 2× dedicated 10G SFP+ high-speed uplink slots, 56 Gbps full non-blocking switching capacity, 41.66 Mpps wire-rate forwarding, full enterprise Layer 2 functions plus dual-stack static & RIP Layer 3 routing, multi-rate voice/video optimized multi-queue QoS, multilayer network security, front-panel stacking, multi-mode encrypted management and wide-temperature passive cooling, purpose-built for high-speed edge access, high-power Wi-Fi 6/6E AP fleets, 2.5G PTZ surveillance camera deployments and compact mini-branch networks requiring simultaneous full 30W PoE+ power and low-latency 10G redundant fiber uplink scalability.
3. Complete Product Overview Paragraph
The Cisco Catalyst C1300-8MGP-2X is a compact fanless multi-rate full high-power PoE+ managed Layer 3 edge switch within the Catalyst 1300 SMB switching portfolio, engineered to deliver full 30W IEEE 802.3at PoE+ power to all 8 mixed-speed copper ports concurrently without mandatory power throttling. Differentiated from standard single-speed Gigabit C1300 PoE models, this unit combines 4×10/100/1000BASE-T and 4×2.5GBase-T multi-Gigabit PoE ports to support next-gen high-bandwidth endpoints including 2.5G PTZ security cameras, Wi-Fi 6/6E wireless access points, all-in-one 4K video conference hardware and digital signage displays without external power injectors. It integrates a robust 120W dedicated full PoE power pool and two exclusive independent 10G SFP+ high-speed uplink slots, eliminating Gigabit uplink bandwidth bottlenecks to deploy multiple redundant long-distance high-throughput inter-building or cross-floor fiber connections to core network switches for superior uplink fault tolerance and fabric expansion capacity.
Built with an all-metal half-width 1U rack-mount chassis and fully fanless passive heat sink cooling architecture, the switch generates zero acoustic noise, making it ideal for noise-sensitive environments such as meeting rooms, education classrooms and retail customer areas. It features an integrated internal universal AC power supply to eliminate messy external power adapters and simplify cabinet cabling layout. The unit delivers full wire-rate non-blocking performance across all 10 physical ports (8 multi-rate full PoE access + 4 dedicated 10G SFP+ uplink), auto-negotiating 10/100/1000/2500 Mbps transmission speeds over Cat5e/Cat6/Cat6a twisted pair cabling with a maximum 100-meter copper cable reach. The 10G SFP+ uplink slots maintain backward compatibility with standard Gigabit SFP transceivers for flexible mixed-speed uplink deployment. Two dedicated management interfaces are integrated: front-panel USB Type-C console and RJ45 serial console for offline direct laptop configuration, paired with multi-color front-panel LEDs indicating system power, port link speed, data activity and real-time PoE power load status.
Powered by a Linux-based dual-core 1.4 GHz ARM processor with 1GB DDR4 DRAM and 512MB onboard flash storage, the switch carries enhanced enterprise features over Catalyst 1200 generation: hardware stacking to unify up to 8 switches under a single management IP, full 4093 VLAN capacity, complete STP/RSTP/MSTP loop prevention, LACP link aggregation, robust DDoS and ARP flood attack suppression, dual-stack IPv4/IPv6 routing including static inter-VLAN routing and RIP dynamic routing, plus multiple encrypted remote management channels including HTTPS web GUI, SSHv2 and SNMPv3. Configurable PoE port priority acts as secondary emergency protection under unexpected extreme power overload to preserve power supply for critical business hardware. IEEE 802.3az Energy Efficient Ethernet cuts idle port power draw, while LLDP/LLDP-MED enables zero-touch auto-discovery and provisioning of all high-power multi-Gigabit PoE voice, video and wireless endpoints.
A wide operating temperature window of -5°C to 50°C supports deployment in poorly ventilated compact cabinets and unmanned remote edge sites. Firmware upgrades and full configuration backup/restore can be completed via TFTP, local USB storage or web upload without network service interruption, and a physical hardware reset push button enables one-click factory default restoration for fast site refresh and redeployment. PoE power supply remains uninterrupted during firmware upgrades to avoid offline surveillance or wireless downtime.
4. Detailed Hardware Interface & Physical Specifications
Front Panel Port Layout
-
8 × Multi-rate auto-sensing RJ45 full PoE+ ports:
-
4 × 10/100/1000BASE-T PoE+
-
4 × 2.5GBase-T PoE+
All ports comply with IEEE 802.3af (15.4W max) / IEEE 802.3at PoE+ (30W max)
-
2 × independent dedicated 10G SFP+ uplink slots (10-gigabit fiber, backward compatible with Gigabit SFP transceivers, no shared RJ45 combo interface)
-
Dual management console ports: RJ45 serial console + front-panel USB Type-C direct console
-
Hardware factory reset push button
-
Multi-color LED array: System power indicator, per-port link/activity/speed LEDs, dedicated PoE power status lights, global fault warning indicators
PoE Power Specifications
-
Total integrated full PoE power budget: 120W
-
Supported PoE standards: IEEE 802.3af (Class 0–3, max 15.4W), IEEE 802.3at PoE+ (Class 4, max 30W)
-
Full PoE capability: Supports full 30W PoE+ output on all 8 multi-rate ports simultaneously under nominal operating load
-
PoE management functions: User-defined high/low port priority overload protection, scheduled PoE power on/off for off-hours energy saving, non-stop PoE output during firmware updates
-
Model differentiation: Multi-Gigabit mixed 1G/2.5G port layout vs single-speed Gigabit C1300-8FP-2G
Core Performance Benchmarks
-
Total full-duplex non-blocking switching capacity: 56 Gbps
-
64-byte packet wire-rate forwarding rate: 41.66 Mpps
-
MAC address table capacity: 16,000 MAC address entries
-
Maximum simultaneous active VLANs: 4093 (802.1Q tagged VLANs)
-
LACP link aggregation: Up to 4 LAG groups, maximum 8 ports per trunk
-
Shared dynamic packet buffer memory: 1.5 MB
-
Jumbo frame support: Up to 9000 bytes
-
Stack capability: Front stacking cable compatible, stack up to 8 Catalyst 1300 switches managed via single unified IP address
Supported SFP/SFP+ Transceivers (10G Uplink Slots)
-
10G SFP+ transceivers: 10G-SR multimode short-reach, 10G-LR single-mode long-reach, 10G-T copper SFP+
-
Gigabit SFP backward fallback: GLC-SX-MMD, GLC-LH-SMD, MGBT1 Gigabit copper SFP
Mechanical & Environmental Parameters
-
Form factor: Compact half-width 19-inch rack-mount metal chassis, wall-mount brackets included
-
Physical dimensions (W × D × H): 268 mm × 323 mm × 44 mm (10.55 × 12.72 × 1.73 in)
-
Unit weight: 2.64 kg (5.82 lb, integrated internal universal AC power supply, no external power brick)
-
Cooling architecture: Fully fanless passive heat dissipation, zero acoustic operating noise
-
Operating temperature range: -5°C to 50°C (23°F to 122°F)
-
Storage temperature range: -25°C to 70°C (-13°F to 158°F)
-
Relative humidity: 10%–90% non-condensing
-
MTBF @ 25°C ambient temperature: Over 1,750,000 hours
-
Power input: Built-in universal AC 100–240V 50/60Hz internal power supply
-
Copper cabling maximum transmission distance: 100 meters for all RJ45 multi-rate ports
Global Compliance Certifications
UL 62368 safety certification, CSA 22.2, CE marking, FCC Part 15 Class A industrial EMC compliance
-
Limited lifetime hardware warranty with advance replacement service, free permanent firmware updates
5. Core Software Feature Suite
Layer 2 Switching Functions
-
IEEE 802.1D STP, default-enabled 802.1w RSTP, 802.1s MSTP (8 instances), PVST+/RPVST+
-
Full multi-type VLAN suite: 802.1Q tagged VLAN, voice VLAN, guest VLAN, private VLAN edge, Auto Surveillance VLAN, MAC/IP/subnet/protocol-based VLAN, MVR Multicast TV VLAN
-
Static & dynamic IEEE 802.3ad LACP link aggregation with automatic trunk failover
-
IGMP Snooping v1/v2/v3 (255 multicast groups) for IPTV and 2.5G HD PTZ surveillance video streams over 10G uplinks
-
Local SPAN port mirroring, built-in virtual cable test for twisted pair wiring fault diagnosis
-
IEEE 802.3az Energy Efficient Ethernet idle port power reduction
-
LLDP + LLDP-MED automatic multi-Gigabit PoE endpoint discovery and zero-touch provisioning
-
Hardware stacking: Unified single-IP centralized management for up to 8 stacked C1300 series switches
Layer 3 Routing Capabilities (Exclusive Upgrade Over Catalyst 1200)
-
Static inter-VLAN routing for IPv4 & IPv6 dual-stack networks
-
Dynamic routing: RIP v1/v2 (IPv4), RIPng (IPv6) protocol support
-
Global default static route and host-specific static routing entries
-
Integrated DHCP server, DHCP snooping, DHCP relay agent for local LAN IP address allocation
-
No OSPF, EIGRP or BGP advanced enterprise dynamic routing protocols supported
QoS Traffic Prioritization
-
8 independent hardware priority queues per port, 802.1p CoS classification, DSCP marking & remarking
-
Per-port ingress/egress bandwidth rate limiting, broadcast/multicast/unicast storm suppression
-
Low-latency optimized queue scheduling for multi-Gigabit full PoE+ PTZ cameras, Wi-Fi 6/6E APs and 4K HD surveillance video transmitted over high-speed 10G SFP+ uplinks
Enterprise Network Security Features
-
IEEE 802.1X port-based authentication with full RADIUS AAA integration, web-based guest authentication
-
Port security, sticky static MAC binding, configurable MAC address learning lockdown limits
-
Layer 2 access control lists, ARP flood & DDoS attack suppression, control plane CPU protection policy
-
Secure encrypted management only: SSHv2, HTTPS, SNMPv3; plaintext Telnet fully disableable
-
Port isolation, blackhole MAC filtering, multi-tier role-based administrative password permission control
-
Encrypted firmware upgrades and password-protected configuration file storage
Multi-Access Network Management
-
Encrypted web-based graphical management GUI (HTTPS)
-
Dual offline CLI console access: RJ45 serial console + front-panel USB Type-C direct console
-
Remote management protocols: SSHv2, SNMP v1/v2c/v3, RMON 1/2/3/9
-
System logging: Local flash storage buffer + remote syslog server log forwarding
-
Multi-channel firmware upgrade: TFTP server, HTTP/HTTPS web upload, local USB flash drive; PoE remains active during upgrades
-
Cloud & mobile management compatibility: Cisco Business Dashboard cloud monitoring platform, Cisco Catalyst mobile management app
6. Typical Deployment Use Cases
-
Small office high-speed edge rack full PoE access switch fully powering Wi-Fi 6/6E APs and 2.5G PTZ surveillance cameras, with dual dedicated 10G SFP+ fiber uplinks for high-bandwidth redundant multi-path connections to core data center switches
-
Mini remote branch wiring closet switch for mixed 1G desktop + 2.5G surveillance PoE deployments, utilizing single-mode 10G SFP+ fiber links for cost-effective high-speed long-distance backhaul to headquarters
-
Retail store front-counter aggregation switch for PoE digital signage, multi-PTZ 2.5G surveillance arrays and high-power guest wireless access points with 10G uplinks to process massive multi-stream video surveillance traffic
-
Classroom & training room edge deployment requiring silent fanless operation, compact half-width rack/wall-mount installation and multi-rate 2.5G bandwidth for high-resolution lecture streaming
-
Low-density high-speed expansion edge switch for small server room workgroup aggregation, where native 10G SFP+ uplinks eliminate Gigabit throughput bottlenecks for large media and surveillance workloads
-
Stackable building block for scalable high-speed small campus edge fabric, stacking up to 8 identical C1300 series multi-Gigabit PoE switches under one unified management IP
7. Datasheet Short Summary Paragraph
The Cisco Catalyst C1300-8MGP-2X is a silent fanless compact half-width managed Layer 3 multi-Gigabit full PoE+ business switch equipped with mixed 4×1G + 4×2.5G IEEE 802.3af/at PoE+ RJ45 access ports (120W total full simultaneous PoE power budget) and two independent dedicated 10G SFP+ high-speed fiber uplink slots, delivering 56 Gbps non-blocking switching capacity and 41.66 Mpps wire-rate forwarding. It provides a complete enterprise Layer 2 feature set plus dual-stack IPv4/IPv6 static & RIP dynamic Layer 3 routing, multi-rate voice/video QoS scheduling, multilayer network security, front-panel stacking capability and multi-mode encrypted remote management, with integrated internal power passive silent cooling and wide-temperature environmental adaptability. Differentiated from single-speed Gigabit C1300-8FP-2G by its mixed 1G/2.5G multi-Gigabit copper downlink design and native 10G SFP+ high-bandwidth uplink architecture, this unit serves as a low-density high-speed heavy-duty full PoE access layer edge switch for small offices, retail, classrooms and mini-branch networks deploying high-power Wi-Fi 6/6E APs, 2.5G PTZ surveillance cameras and 4K video hardware alongside multiple redundant high-throughput 10G fiber interconnections to core infrastructure.
|
