Full English Description for Cisco C1300-8FP-2G

1. Part Number Naming Breakdown

Model: C1300-8FP-2G

C1300: Cisco Catalyst 1300 series enhanced managed Gigabit Layer 3 switch platform built for SMB, small branch offices, retail edge, classroom and unified voice-video-data networks; upgraded from Catalyst 1200 with hardware stacking, dual-stack IPv4/IPv6 and RIP dynamic routing supportCisco
8: 8× 10/100/1000BASE-T RJ45 PoE-capable downlink access ports
FP: Full high-power PoE+ flagship variant, total integrated 120W PoE power budget, every port supports simultaneous full IEEE 802.3at 30W power outputCisco
2G: Two independent Gigabit RJ45/SFP combo uplink ports (shared interface, support either copper RJ45 or Gigabit SFP fiber transceivers, only one medium active per slot)
Form factor: Compact half-width 1U rack/wall-mount integrated internal PSU fanless passive cooling chassis; Software stack: Complete Layer 2 feature suite + static IPv4/IPv6 Layer 3 routing + RIP v1/v2 & RIPng dynamic routing

2. Short Sales One-Liner (For BOM, Quotation & Datasheet Header)

Cisco Catalyst C1300-8FP-2G, silent fanless compact half-width managed Gigabit Layer 3 full PoE+ switch with 8×802.3af/at PoE+ RJ45 access ports (120W total full PoE budget) and 2× Gigabit RJ45/SFP combo uplink ports, 20 Gbps full non-blocking switching capacity, 14.88 Mpps wire-rate forwarding, full enterprise Layer 2 feature set plus dual-stack static & RIP Layer 3 routing, voice/video optimized multi-queue QoS, multilayer network security, front-panel stacking capability, multi-mode encrypted management and wide-temperature passive cooling, purpose-built for small office edge access, retail high-power surveillance, Wi-Fi 6 AP deployments and compact mini-branch networks requiring full simultaneous 30W PoE+ power and flexible copper/fiber combo uplink scalability.

3. Complete Product Overview Paragraph

The Cisco Catalyst C1300-8FP-2G is a compact fanless full high-power PoE+ managed Gigabit Layer 3 edge switch within the Catalyst 1300 SMB switching portfolio, engineered to deliver full 30W IEEE 802.3at PoE+ power to all 8 copper ports concurrently without mandatory power throttling. Differentiated from moderate-power C1300-8P-E-2G (limited 67W PoE budget) and non-PoE C1300-8T-E-2G variants, this unit integrates a robust 120W dedicated PoE power pool to support high-consumption PoE endpoints including Wi-Fi 6 wireless access points, pan-tilt-zoom (PTZ) surveillance cameras, all-in-one video conference units and digital signage displays without external power injectorsCisco. Equipped with dual Gigabit combo uplink ports, it delivers flexible deployment options: short-distance copper cabling or long-distance fiber backhaul to core network switches via Gigabit SFP transceivers.

Built with an all-metal half-width 1U rack-mount chassis and fully fanless passive heat sink cooling architecture, the switch generates zero acoustic noise, making it ideal for noise-sensitive environments such as meeting rooms, education classrooms and retail customer areas. It features an integrated internal AC power supply (no separate external power brick) to simplify cabling and space layout. The unit delivers full wire-rate non-blocking performance across all 10 physical ports (8 full PoE access + 2 combo uplink), auto-negotiating 10/100/1000 Mbps transmission speeds over Cat5e, Cat6 and Cat6a twisted pair cabling with a maximum 100-meter copper cable reach. Two dedicated management interfaces are integrated: front-panel USB Type-C console and RJ45 serial console for offline direct laptop configuration, paired with multi-color front-panel LEDs showing system health, port link speed, data activity and real-time PoE power load status.

Powered by a Linux-based dual-core 1.4 GHz ARM processor with 1GB DDR4 DRAM and 512MB onboard flash storage, the switch carries enhanced enterprise features over Catalyst 1200 series: hardware stacking to unify up to 8 switches under a single management IP, full 4093 VLAN capacity, complete STP/RSTP/MSTP loop prevention, LACP link aggregation, robust DDoS and ARP flood attack suppression, dual-stack IPv4/IPv6 routing including static inter-VLAN routing and RIP dynamic routing, plus multiple encrypted remote management channels including HTTPS web GUI, SSHv2 and SNMPv3. Configurable PoE port priority acts as secondary emergency protection under unexpected extreme power overload to preserve power supply for critical business hardware. IEEE 802.3az Energy Efficient Ethernet cuts idle port power draw, while LLDP/LLDP-MED enables zero-touch auto-discovery and provisioning of all high-power PoE voice, video and wireless endpoints.

A wide operating temperature window of -5°C to 50°C supports deployment in poorly ventilated compact cabinets and unmanned remote edge sites. Firmware upgrades and full configuration backup/restore can be completed via TFTP, local USB storage or web upload without network service interruption, and a physical hardware reset push button enables one-click factory default restoration for fast site refresh and redeployment.

4. Detailed Hardware Interface & Physical Specifications

Front Panel Port Layout

8 × 10/100/1000BASE-T auto-sensing RJ45 full PoE+ ports (IEEE 802.3af 15.4W / 802.3at PoE+ 30W per port)
2 × Gigabit RJ45/SFP combo uplink ports (shared interface, only one transmission medium active per slot: copper RJ45 or Gigabit SFP fiber transceiver)
Dual management console ports: RJ45 serial console + front-panel USB Type-C direct console
Hardware factory reset push button
Multi-color LED array: System power indicator, per-port link/activity/speed LEDs, dedicated PoE power status lights, global fault warning indicators

PoE Power Specifications

Total integrated full PoE power budget: 120WCisco
Supported PoE standards: IEEE 802.3af (Class 0–3, max 15.4W), IEEE 802.3at PoE+ (Class 4, max 30W)
Full PoE capability: Supports full 30W PoE+ output on all 8 ports simultaneously under nominal operating load
PoE management functions: User-defined high/low port priority overload protection, scheduled PoE power on/off for off-hours energy saving
Model differentiation: 120W full simultaneous PoE pool vs limited 67W moderate PoE budget of C1300-8P-E-2G

Core Performance Benchmarks

Total full-duplex non-blocking switching capacity: 20 Gbps
64-byte packet wire-rate forwarding rate: 14.88 Mpps
MAC address table capacity: 16,000 MAC address entries
Maximum simultaneous active VLANs: 4093 (802.1Q tagged VLANs)
LACP link aggregation: Up to 4 LAG groups, maximum 8 ports per trunk
Shared dynamic packet buffer memory: 1.5 MB
Jumbo frame support: Up to 9000 bytes
Stack capability: Front stacking cable compatible, stack up to 8 Catalyst 1300 switches managed via single unified IP address

Supported Gigabit SFP Transceivers (Combo Uplink Slots)

Multimode short-reach fiber: GLC-SX-MMD, MGBSX1
Single-mode long-reach fiber: GLC-LH-SMD, MGBLH1 (up to 40km transmission distance)
Gigabit copper SFP module: MGBT1 for long-distance copper uplink extension

Mechanical & Environmental Parameters

Form factor: Compact half-width 19-inch rack-mount metal chassis, wall-mount brackets included
Physical dimensions (W × D × H): 268 mm × 220 mm × 44 mm
Unit weight: 1.42 kg (3.13 lb, integrated internal universal AC power supply, no external power brick)
Cooling architecture: Fully fanless passive heat dissipation, zero acoustic operating noise
Operating temperature range: -5°C to 50°C (23°F to 122°F)
Storage temperature range: -25°C to 70°C (-13°F to 158°F)
Relative humidity: 10%–90% non-condensing
MTBF @ 25°C ambient temperature: Over 1,750,000 hours
Power input: Built-in universal AC 100–240V 50/60Hz internal power supply
Copper cabling maximum transmission distance: 100 meters for all RJ45 ports

Global Compliance Certifications

UL 62368 safety certification, CSA 22.2, CE marking, FCC Part 15 Class A industrial EMC compliance

Limited lifetime hardware warranty with advance replacement service, free permanent firmware updates

5. Core Software Feature Suite

Layer 2 Switching Functions

IEEE 802.1D STP, default-enabled 802.1w RSTP, 802.1s MSTP (8 instances), PVST+/RPVST+
Full multi-type VLAN suite: 802.1Q tagged VLAN, voice VLAN, guest VLAN, private VLAN edge, Auto Surveillance VLAN, MAC/IP/subnet/protocol-based VLAN, MVR Multicast TV VLAN
Static & dynamic IEEE 802.3ad LACP link aggregation with automatic trunk failover
IGMP Snooping v1/v2/v3 (255 multicast groups) for IPTV and HD PTZ surveillance video streams
Local SPAN port mirroring, built-in virtual cable test for twisted pair wiring fault diagnosis
IEEE 802.3az Energy Efficient Ethernet idle port power reduction
LLDP + LLDP-MED automatic endpoint discovery and zero-touch provisioning
Hardware stacking: Unified single-IP centralized management for up to 8 stacked C1300 series switchesCisco

Layer 3 Routing Capabilities (Exclusive Upgrade Over Catalyst 1200)

Static inter-VLAN routing for IPv4 & IPv6 dual-stack networks
Dynamic routing: RIP v1/v2 (IPv4), RIPng (IPv6) protocol support
Global default static route and host-specific static routing entries
Integrated DHCP server, DHCP snooping, DHCP relay agent for local LAN IP address allocation
No OSPF, EIGRP or BGP advanced enterprise dynamic routing protocols supported

QoS Traffic Prioritization

8 independent hardware priority queues per port, 802.1p CoS classification, DSCP marking & remarking
Per-port ingress/egress bandwidth rate limiting, broadcast/multicast/unicast storm suppression
Low-latency optimized queue scheduling for full PoE+ PTZ cameras, Wi-Fi 6 APs and HD surveillance video transmitted over combo fiber uplinks

Enterprise Network Security Features

IEEE 802.1X port-based authentication with full RADIUS AAA integration, web-based guest authenticationCisco
Port security, sticky static MAC binding, configurable MAC address learning lockdown limits
Layer 2 access control lists, ARP flood & DDoS attack suppression, control plane CPU protection policy
Secure encrypted management only: SSHv2, HTTPS, SNMPv3; plaintext Telnet fully disableable
Port isolation, blackhole MAC filtering, multi-tier role-based administrative password permission control
Encrypted firmware upgrades and password-protected configuration file storage

Multi-Access Network Management

Encrypted web-based graphical management GUI (HTTPS)
Dual offline CLI console access: RJ45 serial console + front-panel USB Type-C direct console
Remote management protocols: SSHv2, SNMP v1/v2c/v3, RMON 1/2/3/9
System logging: Local flash storage buffer + remote syslog server log forwarding
Multi-channel firmware upgrade: TFTP server, HTTP/HTTPS web upload, local USB flash drive
Cloud & mobile management compatibility: Cisco Business Dashboard cloud monitoring platform, Cisco Catalyst mobile management app

6. Typical Deployment Use Cases

Small office edge rack full PoE access switch fully powering Wi-Fi 6/6E APs, PTZ surveillance cameras and compact video conference hardware, with dual Gigabit combo RJ45/SFP uplinks for flexible redundant copper or fiber connections to core network switches
Mini remote branch wiring closet switch for high-power PoE VoIP and multi-PTZ security camera deployments, utilizing SFP single-mode fiber combo uplinks for cost-effective long-distance backhaul to headquarters
Retail front-counter aggregation switch for PoE digital signage, multi-PTZ surveillance arrays and high-power guest wireless access points
Classroom & training room edge deployment requiring silent fanless operation and compact half-width rack/wall-mount installation
Low-density expansion edge switch for small server room workgroup aggregation, where combo shared copper/fiber uplinks eliminate extra dedicated SFP-only hardware costs
Stackable building block for scalable small campus edge fabric, stacking up to 8 identical C1300 series switches under one unified management IP

7. Datasheet Short Summary Paragraph

The Cisco Catalyst C1300-8FP-2G is a silent fanless compact half-width managed Gigabit Layer 3 full PoE+ business switch equipped with 8×IEEE 802.3af/at PoE+ RJ45 access ports (120W total full PoE power budget) and two shared Gigabit RJ45/SFP combo uplink ports, delivering 20 Gbps non-blocking switching capacity and 14.88 Mpps wire-rate forwarding. It provides a complete enterprise Layer 2 feature set plus dual-stack IPv4/IPv6 static & RIP dynamic Layer 3 routing, multi-queue voice/video QoS scheduling, multilayer network security, front-panel stacking capability and multi-mode encrypted remote management, with integrated internal power passive silent cooling and wide-temperature environmental adaptability. Differentiated from moderate-power C1300-8P-E-2G by its industry-sufficient 120W full PoE power pool capable of supplying full 30W PoE+ to all ports concurrently, this unit serves as a low-density heavy-duty full PoE access layer edge switch for small offices, retail, classrooms and mini-branch networks deploying high-power Wi-Fi 6 APs, PTZ surveillance cameras and video conference hardware alongside flexible Gigabit copper/fiber combo uplink options and unified stackable centralized management.


	© 2026 Kino Technology Limited. All Rights Reserved. \| Hong Kong Registered · Shenzhen Operation \| New & Genuine Used Network Equipment Supplier