Full English Description for Cisco C1300-8P-2G

1. Part Number Naming Breakdown

Model: C1300-8P-2G

C1300: Cisco Catalyst 1300 enterprise-managed Gigabit Layer 3 switch platform for SMB, mini branch, retail and classroom unified voice-data-video networks, upgraded from Catalyst 1200 with native stacking, dual-stack IPv4/IPv6 and RIP dynamic routing
8: 8× 10/100/1000BASE-T RJ45 PoE-capable copper downlink access ports
P: Standard PoE+ variant with total integrated 67W PoE power budget, each port supports IEEE 802.3af (15.4W) / IEEE 802.3at (30W)
2G: Two independent Gigabit RJ45/SFP combo uplink ports (shared combo interface, support either copper RJ45 or Gigabit SFP fiber transceivers simultaneously one per slot)
Form factor: Compact half-width 1U rack/wall-mount fanless passive cooling chassis with external power adapter; Software stack: Complete Layer 2 feature suite + static IPv4/IPv6 Layer 3 routing + RIP v1/v2 / RIPng dynamic routing

C1300-8P-E-2G Hardware Front Panel

2. Short Sales One-Liner (For BOM, Quotation & Datasheet Header)

Cisco Catalyst C1300-8P-2G, silent fanless compact half-width managed Gigabit Layer 3 PoE+ switch with 8×802.3af/at PoE+ RJ45 access ports (67W total PoE budget) and 2× Gigabit RJ45/SFP combo uplink ports, 20 Gbps full non-blocking switching capacity, 14.88 Mpps wire-rate forwarding, full enterprise Layer 2 functions plus dual-stack static & RIP Layer 3 routing, voice/video optimized multi-queue QoS, multilayer network security, front-panel stacking, multi-mode encrypted management and wide-temperature passive cooling, purpose-built for small office edge access, retail VoIP & surveillance, classroom Wi-Fi AP deployments and compact mini-branch networks requiring moderate PoE power and flexible copper/fiber combo uplink scalability.

3. Complete Product Overview Paragraph

The Cisco Catalyst C1300-8P-2G is a compact fanless moderate PoE+ managed Gigabit Layer 3 edge switch within the Catalyst 1300 SMB switching portfolio, engineered to power low-to-mid power PoE endpoints including entry-level IP phones, fixed HD surveillance cameras and single-band Wi-Fi access points without external power injectors. Differentiated from non-PoE C1300-8T-E-2G and full high-power PoE C1300-8FP-2G variants, this unit integrates a shared 67W limited PoE power pool across all 8 copper ports, paired with dual Gigabit combo uplink ports that deliver flexible mixed copper or fiber uplink connections to core network switches for short-distance copper cabling or long-distance fiber backhaul.

Built with an all-metal half-width 1U rack-mount chassis and fully fanless passive heat sink cooling, the unit generates zero acoustic noise, making it ideal for noise-sensitive environments such as meeting rooms, education classrooms and retail customer areas. It delivers full wire-rate non-blocking performance across all 10 physical ports (8 PoE access + 2 combo uplink), auto-negotiating 10/100/1000 Mbps transmission speeds over Cat5e, Cat6 and Cat6a twisted pair cabling with a maximum 100-meter copper cable reach. Two dedicated management interfaces are integrated: front-panel USB Type-C console and RJ45 serial console for direct offline laptop configuration, paired with multi-color front-panel LEDs showing system health, port link speed, data activity and real-time PoE power consumption status.

Powered by a Linux-based dual-core 1.4 GHz ARM processor with 1GB DDR4 DRAM and 512MB onboard flash storage, the switch carries enhanced enterprise features over Catalyst 1200 series: support for up to 8 stacked units under single unified IP management, full 4093 VLAN capacity, complete STP/RSTP/MSTP loop prevention, LACP link aggregation, robust DDoS and ARP flood attack suppression, dual-stack IPv4/IPv6 routing including static inter-VLAN routing and RIP dynamic routing, plus multiple encrypted remote management channels including HTTPS web GUI, SSHv2 and SNMPv3. Configurable PoE port priority automatically reduces power to low-priority devices under overload to preserve critical business hardware power supply. IEEE 802.3az Energy Efficient Ethernet cuts idle port power draw, while LLDP/LLDP-MED enables zero-touch auto-discovery and provisioning of all PoE voice, video and wireless endpoints.

A wide operating temperature window of -5°C to 50°C supports deployment in poorly ventilated compact cabinets and unmanned remote edge sites. Firmware upgrades and full configuration backup/restore can be completed via TFTP, local USB storage or web upload without network service downtime, and a physical hardware reset push button enables one-click factory default restoration for fast site refresh and redeployment.

4. Detailed Hardware Interface & Physical Specifications

Front Panel Port Layout

8 × 10/100/1000BASE-T auto-sensing RJ45 PoE+ ports (IEEE 802.3af 15.4W / 802.3at PoE+ 30W per port)
2 × Gigabit RJ45/SFP combo uplink ports (shared interface, only one medium active per slot: copper RJ45 or Gigabit SFP fiber transceiver)
Dual management console ports: RJ45 serial console + front-panel USB Type-C direct console
Hardware factory reset push button
Multi-color LED array: System power indicator, per-port link/activity/speed LEDs, dedicated PoE power status lights, global fault warning indicators

PoE Power Specifications

Total integrated PoE power budget: 67W
Supported PoE standards: IEEE 802.3af (Class 0–3, max 15.4W), IEEE 802.3at PoE+ (Class 4, max 30W)
PoE management functions: User-defined high/low port priority overload protection, scheduled PoE power on/off for energy saving
Model differentiation: Limited 67W moderate PoE pool vs 120W full simultaneous PoE budget of C1300-8FP-2G

Core Performance Benchmarks

Total full-duplex non-blocking switching capacity: 20 Gbps
64-byte packet wire-rate forwarding rate: 14.88 Mpps
MAC address table capacity: 16,000 MAC address entries
Maximum simultaneous active VLANs: 4093 (802.1Q tagged VLANs)
LACP link aggregation: Up to 4 LAG groups, maximum 8 ports per trunk
Shared dynamic packet buffer memory: 1.5 MB
Jumbo frame support: Up to 9000 bytes
Stack capability: Front stacking cable compatible, stack up to 8 Catalyst 1300 switches managed via single IP address

Supported Gigabit SFP Transceivers (Combo Uplink Slots)

Multimode short-reach fiber: GLC-SX-MMD, MGBSX1
Single-mode long-reach fiber: GLC-LH-SMD, MGBLH1 (up to 40km transmission distance)
Gigabit copper SFP module: MGBT1 for long-distance copper uplink extension

Mechanical & Environmental Parameters

Form factor: Compact half-width 19-inch rack-mount metal chassis, wall-mount bracket included
Physical dimensions (W × D × H): 268 mm × 220 mm × 44 mm
Unit weight: 1.38 kg (external universal AC power adapter sold separately)
Cooling architecture: Fully fanless passive heat dissipation, zero acoustic operating noise
Operating temperature range: -5°C to 50°C (23°F to 122°F)
Storage temperature range: -25°C to 70°C (-13°F to 158°F)
Relative humidity: 10%–90% non-condensing
MTBF @ 25°C ambient temperature: 2,170,000 hours
Power input: External 100–240V AC universal power brick, 12V DC input to switch body
Copper cabling maximum transmission distance: 100 meters for all RJ45 ports

Global Compliance Certifications

UL 62368 safety certification, CSA 22.2, CE marking, FCC Part 15 Class A industrial EMC compliance

Limited lifetime hardware warranty with advance replacement service, free permanent firmware updates

5. Core Software Feature Suite

Layer 2 Switching Functions

IEEE 802.1D STP, default-enabled 802.1w RSTP, 802.1s MSTP (8 instances), PVST+/RPVST+
Full multi-type VLAN suite: 802.1Q tagged VLAN, voice VLAN, guest VLAN, private VLAN edge, Auto Surveillance VLAN, MAC/IP/subnet/protocol-based VLAN
Static & dynamic IEEE 802.3ad LACP link aggregation with automatic trunk failover
IGMP Snooping v1/v2/v3 (255 multicast groups) for IPTV and HD surveillance video streams
Local SPAN port mirroring, built-in virtual cable test for twisted pair wiring fault diagnosis
IEEE 802.3az Energy Efficient Ethernet idle port power reduction
LLDP + LLDP-MED automatic endpoint discovery and zero-touch provisioning
Hardware stacking: Unified single-IP centralized management for up to 8 stacked C1300 series switches

Layer 3 Routing Capabilities (C1300 Series Exclusive Upgrade Over C1200)

Static inter-VLAN routing for IPv4 & IPv6 dual-stack networks
Dynamic routing: RIP v1/v2 (IPv4), RIPng (IPv6) protocol support
Global default static route and host-specific static routing entries
Integrated DHCP server, DHCP snooping, DHCP relay agent for local LAN IP address allocation
No OSPF, EIGRP or BGP enterprise advanced dynamic routing protocols supported

QoS Traffic Prioritization

8 independent hardware priority queues per port, 802.1p CoS classification, DSCP marking & remarking
Per-port ingress/egress bandwidth rate limiting, broadcast/multicast/unicast storm suppression
Low-latency optimized queue scheduling for PoE VoIP phones and HD surveillance video transmitted over combo fiber uplinks

Enterprise Network Security Features

IEEE 802.1X port-based authentication with full RADIUS AAA integration, web-based guest authentication
Port security, sticky static MAC binding, configurable MAC address learning lockdown limits
Layer 2 access control lists, ARP flood & DDoS attack suppression, control plane CPU protection policy
Secure encrypted management only: SSHv2, HTTPS, SNMPv3; plaintext Telnet fully disableable
Port isolation, blackhole MAC filtering, multi-tier role-based administrative password permission control
Encrypted firmware upgrades and password-protected configuration file storage

Multi-Access Network Management

Encrypted web-based graphical management GUI (HTTPS)
Dual offline CLI console access: RJ45 serial console + front-panel USB Type-C direct console
Remote management protocols: SSHv2, SNMP v1/v2c/v3, RMON 1/2/3/9
System logging: Local flash storage buffer + remote syslog server log forwarding
Multi-channel firmware upgrade: TFTP server, HTTP/HTTPS web upload, local USB flash drive
Cloud & mobile management compatibility: Cisco Business Dashboard cloud monitoring platform, Cisco Catalyst mobile management app

6. Typical Deployment Use Cases

Small office edge rack PoE access switch powering entry-level IP desk phones and single-band Wi-Fi APs, with dual Gigabit combo RJ45/SFP uplinks for flexible redundant copper or fiber connections to core network switches
Mini remote branch wiring closet switch for single-department segmented workgroups, utilizing SFP single-mode fiber combo uplinks for cost-effective long-distance backhaul to headquarters
Retail front-counter aggregation switch for PoE POS terminals and fixed HD surveillance cameras with moderate low-power PoE demands
Classroom & training room edge deployment requiring silent fanless operation and compact half-width rack/wall-mount installation
Low-density expansion edge switch for small server room workgroup aggregation, where combo shared copper/fiber uplinks eliminate extra dedicated SFP-only hardware costs
Stackable building block for scalable small campus edge fabric, stacking up to 8 identical C1300 series switches under one unified management IP

7. Datasheet Short Summary Paragraph

The Cisco Catalyst C1300-8P-2G is a silent fanless compact half-width managed Gigabit Layer 3 PoE+ business switch equipped with 8×IEEE 802.3af/at PoE+ RJ45 access ports (67W total moderate PoE power budget) and two shared Gigabit RJ45/SFP combo uplink ports, delivering 20 Gbps non-blocking switching capacity and 14.88 Mpps wire-rate forwarding. It provides a complete enterprise Layer 2 feature set plus dual-stack IPv4/IPv6 static & RIP dynamic Layer 3 routing, multi-queue voice/video QoS scheduling, multilayer network security, front-panel stacking capability and multi-mode encrypted remote management, with external power passive silent cooling and wide-temperature environmental adaptability. Differentiated from non-PoE C1300-8T-E-2G and high-power C1300-8FP-2G by its limited 67W moderate PoE pool and compact noise-free combo uplink edge design, this unit serves as a low-density space-saving PoE access layer edge switch for small offices, retail, classrooms and mini-branch networks requiring flexible copper/fiber Gigabit uplink options and unified stackable centralized management.


	© 2026 Kino Technology Limited. All Rights Reserved. \| Hong Kong Registered · Shenzhen Operation \| New & Genuine Used Network Equipment Supplier