Full English Description for Cisco C1200-8P-E-2G
1. Part Number Naming Breakdown
-
C1200: Cisco Catalyst 1200 series managed Gigabit Ethernet business switch platform
-
8: 8 front-panel copper access ports
-
P: IEEE 802.3af/at PoE+ powered RJ45 ports
-
E: Standard 1U rack-mount metal chassis (fanless passive cooling)
-
2G: Two Gigabit combo uplink ports (shared RJ45 + SFP fiber slot per port)
-
Software foundation: Full Layer 2 feature suite + static Layer 3 inter-VLAN routing
2. Short Sales One-Liner (For BOM, Quotation & Datasheet Header)
Cisco Catalyst C1200-8P-E-2G, fanless 1U rack-mount PoE+ managed Gigabit switch with 8×802.3af/at PoE+ RJ45 downlink ports and 2×Gigabit RJ45/SFP combo uplinks, total 20 Gbps non-blocking switching capacity, 14.88 Mpps wire-rate forwarding, complete enterprise Layer 2 functions plus static Layer 3 routing, robust QoS, multilayer security, encrypted multi-mode management and wide-temperature operation, designed for SME access layers, remote branches, retail surveillance, VoIP phone deployments and networks requiring fiber uplink expansion and PoE power delivery.
3. Complete Product Overview Paragraph
The Cisco Catalyst C1200-8P-E-2G is a rack-mount fanless PoE+ managed Gigabit access switch within the Catalyst 1200 portfolio, optimized for powering IP phones, Wi-Fi access points, surveillance cameras and other PoE-enabled endpoints without separate power injectors. Distinguished from non-PoE C1200-8T-E-2G models by integrated IEEE 802.3af/at PoE+ power supply, this unit retains two dual-purpose Gigabit combo uplink ports supporting either copper CAT cabling or SFP fiber transceivers to deliver long-distance inter-building cross-floor uplink connectivity to core switches.
Built with all-metal chassis and full passive fanless heat dissipation, the switch operates silently with zero moving mechanical components, achieving an extended MTBF of over 2 million hours at standard room temperature and adapting to poorly ventilated wiring closets. It delivers wire-rate non-blocking performance across all 10 physical ports (8 PoE access ports + 2 combo uplink ports), auto-negotiating 10/100/1000 Mbps speeds over Cat5e/Cat6/Cat6a twisted pair cabling. Two dedicated management interfaces are included: traditional RJ45 serial console and USB Type-C console for convenient laptop local configuration, paired with multi-color LED indicators displaying system status, port link activity, PoE power load and fault alarms.
Equipped with integrated high-efficiency PoE power budget, the chassis supplies simultaneous power to a full set of PoE+ devices, supporting per-port PoE priority scheduling to cut power to low-priority loads during peak overload scenarios. Powered by a dual-core ARM processor with abundant DRAM and flash storage, the platform carries a full enterprise feature stack including comprehensive VLAN segmentation, multi-queue QoS traffic prioritization, full spanning tree protection, LACP link aggregation, DDoS and ARP attack defense, plus multiple secure management access channels: HTTPS web GUI, SSHv2, SNMPv3 and cloud mobile management support. Native static Layer 3 routing enables simple inter-VLAN forwarding without dedicated standalone routers, simplifying segmented office network design. IEEE 802.3az Energy Efficient Ethernet reduces idle port power draw, while LLDP/LLDP-MED enables automated discovery and provisioning of PoE VoIP, camera and wireless AP endpoints.
The wide operating temperature range of -5°C to 50°C allows deployment in retail backrooms, remote branch equipment cabinets and semi-outdoor mild-temperature enclosures. Firmware upgrades and configuration backup/restore can be executed via TFTP or web upload without service interruption, and a physical reset button provides one-touch restoration to factory default settings for fast site redeployment.
4. Detailed Hardware Interface & Physical Specifications
Front Panel Port Layout
-
8 × 10/100/1000BASE-T auto-sensing RJ45 PoE+ ports (802.3af 15.4W / 802.3at 30W per port)
-
2 × Gigabit combo uplink ports: each shared RJ45 copper + SFP fiber slot (only one interface active per combo port)
-
Dual management console ports: RJ45 serial console + USB Type-C console
-
Hardware factory reset button
-
Multi-color LED array: system power, port link/activity, PoE power status, fault warning indicators
PoE Power Specifications
-
Total integrated PoE power budget: 240W
-
Per-port power modes: IEEE 802.3af (Class 0–3, max 15.4W), IEEE 802.3at PoE+ (Class 4, max 30W)
-
PoE priority control: User-configurable high/low port priority for overload protection
-
PoE scheduling: Timed power on/off for surveillance cameras and off-hours power saving
Core Performance Benchmarks
-
Total full-duplex non-blocking switching capacity: 20 Gbps
-
64-byte packet wire-rate forwarding rate: 14.88 Mpps
-
MAC address table capacity: 8,000 MAC address entries
-
Maximum active VLANs: 256 (VLAN ID range 1–4094)
-
LACP link aggregation: Up to 8 LAG groups, maximum 8 ports per trunk
-
Shared packet buffer memory: 1.5 MB
Supported SFP Transceivers (Combo Uplink Slots)
-
Multimode fiber: GLC-SX-MMD, MGBSX1
-
Single-mode fiber long-reach: GLC-LH-SMD, MGBLH1 (up to 40km)
-
Copper SFP module: MGBT1 (100m Cat5e Gigabit copper)
Mechanical & Environmental Parameters
-
Form factor: 1U standard 19-inch rack-mount metal chassis, wall-mount compatible
-
Dimensions (W × D × H): 268 mm × 185 mm × 44 mm (10.56 × 7.28 × 1.73 in)
-
Unit weight: 1.52 kg (3.35 lb)
-
Cooling: Fully fanless passive heat sink, no operating noise
-
Operating temperature: -5°C ~ 50°C (23°F ~ 122°F)
-
Storage temperature: -25°C ~ 70°C (-13°F ~ 158°F)
-
Relative humidity: 10%–90% non-condensing
-
MTBF @ 25°C: 2,120,840 hours
-
Internal power supply: Universal AC input 100–240V 50/60Hz integrated PSU
-
Copper cable maximum transmission distance: 100 meters for all RJ45 ports
Global Compliance Certifications
UL 62368, CSA 22.2, CE marking, FCC Part 15 Class A industrial EMC certification
5. Core Software Feature Suite
Layer 2 Switching Functions
-
IEEE 802.1D STP, default-enabled 802.1w RSTP, 802.1s MSTP (8 instances), PVST+
-
802.1Q tagged VLAN, voice VLAN, guest VLAN, private VLAN edge, surveillance auto-VLAN
-
Static & dynamic LACP link aggregation, trunk fault failover protection
-
IGMP Snooping v1/v2/v3 (support up to 255 multicast groups for video surveillance & IPTV)
-
Local SPAN port mirroring, virtual cable test for twisted pair wiring fault diagnosis
-
IEEE 802.3az Energy Efficient Ethernet idle port power reduction
Layer 3 Routing Capabilities
-
Static inter-VLAN routing, default static IPv4 route, host-specific static routes
-
Integrated DHCP server, DHCP snooping, DHCP relay agent for local LAN address allocation
-
No dynamic routing protocols (OSPF / EIGRP / BGP) supported
QoS Traffic Prioritization
-
8 hardware priority queues per port, 802.1p CoS mapping, DSCP remarking and classification
-
Per-port ingress/egress bandwidth rate limiting, broadcast/multicast/unicast storm suppression
-
Optimized voice/video priority queueing for PoE IP phones and HD surveillance camera streams
Enterprise Security Features
-
802.1X port-based authentication with full RADIUS AAA server integration
-
Port security, sticky MAC address binding, configurable MAC count lockdown limits
-
Layer 2 access control lists, ARP flood & DDoS attack suppression, control plane CPU protection policy
-
Encrypted management only: SSHv2, HTTPS; plaintext Telnet fully disableable
-
Port isolation, blackhole MAC filtering, multi-tier administrative password permission control
-
LLDP-MED for automatic PoE endpoint discovery and provisioning
Multi-Access Network Management
-
Encrypted web-based graphical GUI (HTTPS)
-
Dual CLI console access: RJ45 serial console + USB Type-C console
-
Remote management protocols: Telnet, SSH v2, SNMP v1/v2c/v3, RMON 1/2/3/9
-
System logging: Local flash storage + remote syslog server log forwarding
-
Firmware upgrade via TFTP or web upload, full configuration backup & restore
-
Support for Cisco Catalyst mobile app and cloud remote monitoring platform
6. Typical Deployment Use Cases
-
SME rack access layer switch powering PoE Wi-Fi APs, IP desk phones and surveillance cameras, with SFP fiber uplink to core data center switches
-
Remote branch office wiring closet switch for staff VoIP phones and security cameras, long-distance single-mode fiber backhaul to headquarters
-
Retail store network aggregation for PoE POS displays, surveillance cameras and guest wireless access points
-
Small campus secondary building access layer, utilizing long-reach SFP single-mode fiber uplinks between buildings
-
Medical clinics, conference rooms and classrooms requiring silent fanless operation plus PoE endpoint power supply
-
Auxiliary expansion rack switch for small server rooms with mixed voice, video and wireless PoE workloads, requiring flexible fiber uplink scalability unavailable on desktop non-PoE models
7. Datasheet Short Summary Paragraph
The Cisco Catalyst C1200-8P-E-2G is a fanless 1U rack-mount PoE+ managed Gigabit business switch featuring 8×IEEE 802.3af/at PoE+ RJ45 access ports and two Gigabit RJ45/SFP combo fiber-capable uplink ports, delivering 20 Gbps non-blocking switching capacity and 14.88 Mpps wire-rate forwarding with a total 240W integrated PoE power budget. It includes a full enterprise Layer 2 feature set plus static Layer 3 inter-VLAN routing, dedicated voice/video QoS scheduling, multilayer network security and multiple encrypted management channels. With silent passive cooling and wide-temperature adaptability, this PoE-capable rack switch serves as a flexible scalable access layer solution for small/medium businesses, remote branches and retail networks deploying PoE IP phones, surveillance cameras and wireless APs alongside fiber uplink interconnection to core infrastructure.
|
