Full English Description for Cisco C1200-8T-E-2G

1. Part Number Naming Breakdown

Model: C1200-8T-E-2G

C1200: Cisco Catalyst 1200 series business managed Gigabit Ethernet switch platform
8: 8 × 10/100/1000BASE-T copper downlink ports
T: Non-PoE copper RJ45 ports
E: Rack-mountable standard metal chassis (differentiated from D desktop fanless compact variant)
2G: 2× Gigabit combo uplink ports (shared RJ45 + SFP fiber slot per port)
Architecture: Layer 2 full feature set + static Layer 3 inter-VLAN routing, fanless passive cooling design

C1200-8T-E-2G Front Panel

2. Short Sales One-Liner (For BOM, Quotation & Datasheet Header)

Cisco Catalyst C1200-8T-E-2G, fanless 1U rack-mount managed Gigabit switch with 8×10/100/1000 RJ45 data ports and 2×Gigabit copper/SFP combo uplinks, 20 Gbps non-blocking switching capacity, 14.88 Mpps wire-rate forwarding, complete Layer 2 feature suite plus static Layer 3 routing, multi-mode secure management, enterprise-grade QoS & security, wide temperature range operation, purpose-built for small/medium business access layer, remote branch offices, retail networks, and multi-segment office LAN deployments with fiber uplink expansion capability.

3. Complete Product Overview Paragraph

The Cisco Catalyst C1200-8T-E-2G is a rack-mount fanless managed Gigabit access switch from the Catalyst 1200 series, designed for small-to-medium enterprise (SME), branch office and retail network deployments requiring flexible fiber uplink scalability. Unlike the desktop-only C1200-8T-D variant without uplink slots, this E-series rack unit adds two dual-purpose Gigabit combo uplink ports to connect to core switches via either copper twisted pair or SFP fiber transceivers, enabling long-distance inter-building or cross-floor network links.

Constructed with all-metal chassis and fully fanless passive heat dissipation, the unit runs silently without moving mechanical parts, delivering high long-term reliability with an MTBF of 2,171,669 hours at 25°C. It delivers full wire-rate non-blocking performance across all 10 ports (8 data + 2 uplink), supporting automatic speed/duplex negotiation for 10/100/1000 Mbps endpoints over Cat5e/Cat6/Cat6a cabling. Two dedicated management interfaces are provided: traditional RJ45 console port plus modern USB Type-C console for laptop direct configuration, alongside multi-color LED indicators for system power, port link status, data activity and fault diagnosis.

Powered by a dual-core 1.4 GHz ARM processor with 1 GB DDR4 DRAM and 512 MB flash storage, the switch integrates a full enterprise feature stack beyond basic smart switches: comprehensive VLAN segmentation, advanced multi-queue QoS traffic prioritization, complete spanning tree protection, LACP link aggregation, robust multi-layer security policies, and multi-access encrypted management interfaces including web GUI, SSH, SNMPv3 and mobile cloud management app support. Native static Layer 3 routing enables inter-VLAN forwarding without standalone routers, simplifying segmented office network architecture. IEEE 802.3az Energy Efficient Ethernet (EEE) automatically cuts power consumption on idle ports to reduce long-term operating costs, while LLDP/LLDP-MED enables zero-touch discovery for IP phones, wireless APs and surveillance cameras.

Wide operating temperature support (-5°C to 50°C) allows deployment in poorly cooled wiring closets and remote retail backrooms. All firmware upgrades and configuration backups can be completed via in-band TFTP/web upload without network downtime, and hardware reset button supports one-click factory default restoration for fast site redeployment.

4. Detailed Hardware Interface & Physical Specifications

Front Panel Port Layout

8 × 10/100/1000BASE-T auto-sensing RJ45 copper data ports (non-PoE)
2 × Gigabit combo uplink ports: each shared RJ45 + SFP fiber slot (one active interface per combo port)
Dual management console ports: RJ45 serial console + USB Type-C console
Hardware factory reset button
Multi-color LED array: system status, port link/activity, fault alarm indicators

Performance Benchmarks

Total switching capacity: 20 Gbps full duplex non-blocking
64-byte packet forwarding rate: 14.88 Mpps wire-rate
MAC address table depth: 8,000 MAC entries
Active VLAN support: Up to 256 VLANs, range 1–4094
LACP aggregation: Max 8 LAG groups, up to 8 ports per trunk
Packet buffer memory: 1.5 MB shared buffer pool

SFP Transceiver Compatibility (Combo Uplink Slots)

Multimode fiber: GLC-SX-MMD, MGBSX1
Single-mode fiber: GLC-LH-SMD, MGBLH1 (up to 40km)
Copper SFP: MGBT1 (100m Cat5e)

Mechanical & Environmental Parameters

Form factor: 1U standard 19-inch rack-mount metal chassis, also supports wall-mount installation
Dimensions (W × D × H): 268 mm × 185 mm × 44 mm (10.56 × 7.28 × 1.73 in)
Unit weight: 1.39 kg (3.06 lb)
Cooling: Fully fanless passive heat sink, zero acoustic noise
Operating temperature: -5°C to 50°C (23°F–122°F)
Storage temperature: -25°C to 70°C (-13°F–158°F)
Relative humidity: 10%–90% non-condensing
MTBF @ 25°C: 2,171,669 hours
Power supply: Internal universal AC 100–240V 50/60Hz built-in power supply
Cabling maximum reach: 100 meters for all copper ports

Certifications

UL 62368, CSA 22.2, CE mark, FCC Part 15 Class A industrial certification

5. Core Software Feature Suite

Layer 2 Switching Features

IEEE 802.1D STP, default-enabled 802.1w RSTP, 802.1s MSTP (8 instances), PVST+
802.1Q tagged VLAN, voice VLAN, guest VLAN, private VLAN edge, auto-surveillance VLAN
Static/dynamic LACP link aggregation, trunk failover protection
IGMP Snooping v1/v2/v3 (255 multicast groups) for IPTV/IP camera video streams
Port mirroring (SPAN), virtual cable test for twisted pair fault troubleshooting
IEEE 802.3az Energy Efficient Ethernet (EEE) idle power saving

Layer 3 Routing Capabilities

Static inter-VLAN routing, default static route, host-specific static IPv4 routes
DHCP server, DHCP snooping, DHCP relay agent for local LAN address assignment
No dynamic routing protocols (OSPF/EIGRP/BGP) supported

QoS Traffic Prioritization

8 hardware priority queues per port, 802.1p CoS mapping, DSCP remarking
Per-port ingress/egress rate limiting, broadcast/multicast/unicast storm suppression
Dedicated voice/video traffic priority for VoIP phones and surveillance camera streams

Enterprise Security Features

802.1X port-based authentication, full RADIUS AAA server integration
Port security, sticky MAC binding, MAC address lockdown limits
Layer 2 ACL traffic filtering, DDoS/ARP flood attack prevention, CPU protection policy
Encrypted management: SSHv2, HTTPS; plaintext Telnet can be fully disabled
Port isolation, blackhole MAC filtering, multi-level login password access control
LLDP-MED secure endpoint identity discovery for IP voice/video devices

Multi-Access Network Management

Graphical web-based GUI (HTTPS encrypted)
Dual console CLI access: RJ45 serial + USB Type-C
Remote protocols: Telnet, SSH v2, SNMP v1/v2c/v3, RMON 1/2/3/9
System logging: Local flash storage + remote syslog server forwarding
Firmware upgrade via web upload or TFTP, full configuration backup/restore
Mobile Cisco Catalyst mobile app & cloud remote monitoring support

6. Typical Deployment Use Cases

SME office rack access switch connecting PCs, printers, wireless APs and IP cameras, with fiber uplink to core data center switches
Remote branch office wiring closet switch for segmented staff workgroups, long-distance fiber backhaul to headquarters
Retail store network aggregation for POS terminals, surveillance cameras and guest Wi-Fi, rack-mounted in small equipment cabinets
Small campus secondary building access layer, utilizing SFP single-mode fiber uplinks across buildings
Conference room, classroom and medical clinic managed LAN with silent fanless operation requirements
Auxiliary expansion switch for server room rack deployments requiring flexible fiber uplink scalability unavailable on desktop-only C1200-8T-D model

7. Datasheet Short Summary Paragraph

The Cisco Catalyst C1200-8T-E-2G is a fanless 1U rack-mount managed Gigabit business switch equipped with 8×10/100/1000 non-PoE copper data ports and 2×Gigabit SFP/RJ45 combo uplink ports, delivering 20 Gbps non-blocking switching capacity and 14.88 Mpps wire-rate forwarding. It provides a complete Layer 2 feature set plus static Layer 3 inter-VLAN routing, enterprise-grade VLAN, QoS, AAA security and multi-mode encrypted management functions, with passive silent cooling and wide-temperature operation. Differentiated from desktop C1200-8T-D by rack mounting and fiber uplink expansion capability, this model serves as a flexible scalable access layer switch for small/medium businesses, remote branches and retail networks requiring fiber interconnection to core infrastructure.


	© 2026 Kino Technology Limited. All Rights Reserved. \| Hong Kong Registered · Shenzhen Operation \| New & Genuine Used Network Equipment Supplier