Full English Description for Cisco C9300L-24T-4X-M (Official Valid SKU; C9300LM is simplified market shorthand)
1. Part Number Naming Breakdown
-
C9300L: Catalyst 9300 Lite cost-optimized stackable fixed-uplink Layer 3 enterprise access switch built on UADP 2.0 ASIC, fixed built-in uplink hardware platform
-
24T: 24 × 10/100/1000BASE-T Gigabit RJ45 data-only downlink ports, no PoE power delivery capability
-
4X: 4 integrated fixed dual-rate SFP+ uplink slots, auto-negotiate 1G SFP and 10G SFP+ transceivers for high-speed 10G fiber aggregation
-
M: Meraki cloud-native managed hardware platform, fully orchestrated via Meraki Dashboard with renewable term-based Catalyst 9300-M subscription licenses (Enterprise / Advanced). No permanent on-prem IOS XE perpetual licenses; all feature sets are controlled by Meraki cloud subscriptions
2. Short Sales One-Liner (For BOM, Quotation & Datasheet Header)
Cisco Catalyst C9300L-24T-4X-M, 1RU stackable Meraki cloud-managed Layer3 non-PoE Gigabit access switch, 24-port data-only 10/100/1000BASE-T RJ45 downlinks, 4 fixed dual-rate 1G/10G SFP+ fiber uplink interfaces, StackWise-320 stacking support, factory pre-installed 350W AC power supply, unified single-pane Meraki Dashboard cloud management for multi-site office, classroom and branch wired workgroups with PCs, printers and servers requiring high-bandwidth 10G fiber aggregation uplinks.
3. Complete Product Overview Paragraph
The Cisco Catalyst C9300L-24T-4X-M is a compact data-only fixed-uplink stackable Layer 3 edge switch within the Catalyst 9300L-M Meraki cloud-managed portfolio, engineered for corporate office workspaces, K-12 education classrooms, small branch server closets and workstation deployments without PoE-powered endpoints. Equipped with 24 non-PoE Gigabit copper RJ45 downlink ports and four dedicated dual-speed SFP+ uplink ports supporting native 10Gbps aggregation bandwidth, this chassis shares identical wire-speed forwarding hardware performance with on-prem IOS XE C9300L-24T-4X switches, yet all configuration, batch firmware upgrades, real-time monitoring, fault alerting and security policy management are fully centralized exclusively via the Meraki cloud dashboard rather than local CLI or Cisco DNA Center. It supports StackWise-320 stacking technology to aggregate up to 8 identical C9300L-M switches into a single unified logical stack with 320Gbps dedicated stacking bandwidth, features dual hot-swappable 350W AC power supply slots for power redundancy, and delivers native cross-platform policy synchronization alongside Meraki MR wireless access points and MX security gateways in one centralized cloud console. Meraki zero-touch provisioning (ZTP), remote cable diagnostics, cross-site topology visualization and Adaptive Policy zero-trust segmentation are core native capabilities exclusive to all C9300L-M cloud-managed switches, with advanced features unlocked by Meraki Advanced tier subscriptions.
4. Detailed Hardware Interface Specifications
Downlink Copper Ports (24×Data-only Gigabit RJ45)
-
24 × 10/100/1000BASE-T Gigabit Ethernet ports, pure data transmission design with zero PoE power output
-
Auto speed negotiation, auto-MDI/MDI-X, integrated built-in cable diagnostic tools for remote line testing
-
Hardware supports 128-bit AES MACsec link encryption; full 256-bit AES MACsec encryption unlocked only under Meraki Advanced subscription license
Fixed Uplink Interfaces
-
4 dedicated onboard dual-rate SFP+ slots compatible with 1G SFP and 10G SFP+ transceivers (SX, LX, ZX, LR, copper SFP-T and SFP+-T DAC modules supported)
-
Auto-sense 1G or 10G uplink speeds; no modular uplink card expansion slots available
Stacking Interfaces
-
Dual rear dedicated StackWise-320 stacking ports with total 320Gbps stacking bandwidth; compatible with C9300L-STAK-KIT2 stacking cable kits, supports mixed stacking with other C9300L-M models only if all stack members carry matching Meraki license tiersCisco
Management & Auxiliary Ports
-
USB Type-A storage port for offline firmware upload, local configuration backup and system log export
-
Dual console access: USB Type-C console port + Mini-USB B console port for emergency local CLI access when cloud connectivity is lost
-
UID beacon LED push-button for fast physical device identification inside dense rack cabinets
Power & Physical Form Factor
-
Form Factor: 1RU standard 19-inch rack-mount chassis
-
Dual hot-swappable redundant AC power supply slots; factory pre-shipped with single 350W AC PSU (PWR-C1-350WAC-P-M)
-
No PoE power budget applicable, all downlink ports are data-only without power supply capability
-
Thermal design: Field-replaceable redundant variable-speed fan trays; overheat fault notifications are pushed automatically to the Meraki cloud dashboard
-
Environmental compliance: Operating temperature -5°C ~ 45°C, ENERGY STAR certified
5. Core Hardware Performance Benchmarks
-
Standalone Switching Capacity: 56 Gbps
-
Standalone Forwarding Rate: 41.66 Mpps
-
StackWise-320 maximum stacked backplane bandwidth: 592 Gbps (stack of up to 8 C9300L-M units)
-
MAC Address Table Size: 32,000 MAC forwarding entries
-
Shared Packet Buffer Memory: 16MB
-
Onboard Memory: 8GB DRAM, 16GB Flash storage
-
VLAN Support: Up to 4,094 802.1Q tagged VLANs; maximum 1,000 active STP VLANs & SVIs
-
QoS Hardware Queues: 8 priority hardware queues per port, full DSCP & 802.1p CoS traffic marking and scheduling
-
Jumbo Frame Support: Up to 9198-byte jumbo frames
-
ACL Capacity: 5,120 ingress/egress ACL entries
-
IPFIX Flow Telemetry: Sampled flow data under Meraki Enterprise license; full unsampled IPFIX enabled with Advanced license
6. Layer 2 Standard Feature Suite (Meraki Cloud Configured)
IEEE 802.1Q VLAN trunking, IEEE 802.3ad LACP EtherChannel (max 8 ports per bundle), full spanning tree toolkit including PVST+, RPVST+, MSTP with BPDU guard, root guard, loop guard and UDLD; LLDP/CDP unified device inventory auto-synchronized to Meraki dashboard, port security with sticky MAC address allowlists, broadcast/multicast storm suppression, IGMP Snooping v1/v2/v3, SPAN/RSPAN remote packet capture triggered via cloud portal, private VLANs, voice VLAN auto-detection and traffic prioritization, hardware 128-bit MACsec link encryption.
7. Meraki Cloud Native Layer 3, Security & Orchestration Features (Tier-Based Feature Control)
Supported Routing Capabilities
Static IPv4/IPv6 routing, RIP, OSPFv2/v3, VRRP gateway redundancy, wire-speed inter-VLAN routing, PIM sparse-mode stub multicast routing.
-
Meraki Enterprise License: OSPF limited to maximum 1,000 learned routes
-
Meraki Advanced License: Unlimited OSPF dynamic routing table capacity
Cloud-Managed Enterprise Security
IEEE 802.1X multi-domain/multi-host authentication, MAB MAC bypass authentication, DHCP snooping, Dynamic ARP Inspection (DAI), IP Source Guard, CoPP control-plane policing, hardware Secure Boot & Trust Anchor Module, granular RBAC multi-admin dashboard permissions, TLS/SSH encrypted communication tunnel between switch and Meraki cloud.
-
Meraki Advanced exclusive: End-to-end Adaptive Policy group-based traffic segmentation, Encrypted Traffic Analytics (ETA), 256-bit AES MACsec encryption support
Meraki Exclusive Cloud Automation & Visibility
Zero-touch provisioning (ZTP) out-of-box automatic registration to Meraki organization, global bulk firmware scheduling and staged upgrade deployment, live remote cable testing without on-site IT technicians, real-time cross-site network topology mapping, unified wired/wireless policy synchronization with Meraki MR APs and MX security gateways, cloud-hosted centralized event logging, cross-device fault alerting via email/SMS notifications, on-demand remote packet capture for offline troubleshooting.
8. Meraki-M Subscription License Tier Differentiation
All C9300L-M series switches require renewable term-based Meraki Catalyst subscription licenses (1/3/5/7/10-year terms), split into two functional tiers:
-
Enterprise License (Base Tier)
Full Layer 2 switching suite, limited OSPF route scale (max 1,000 routes), standard edge security controls, cloud monitoring and ZTP automation; Adaptive Policy segmentation, full unsampled IPFIX and ETA are disabled.
-
Advanced License (Full Feature Tier)
Unlimited dynamic routing table capacity, Adaptive Policy zero-trust end-to-end traffic segmentation with SGT tagging, full unsampled IPFIX flow telemetry, Encrypted Traffic Analytics (ETA), complete cross-domain wired-wireless fabric policy orchestration and 256-bit AES MACsec encryption support.
Key difference versus on-prem C9300L (-E/-A IOS XE switches: C9300L-M relies on time-limited cloud subscription licensing, while standard C9300L uses permanent perpetual IOS XE licenses without mandatory cloud connectivity. All stack members must deploy matching Meraki license tiers to guarantee full stacking interoperability and consistent network policy operation.
9. Datasheet Short Summary Paragraph
The Cisco Catalyst C9300L-24T-4X-M is a Meraki cloud-native stackable Layer 3 non-PoE Gigabit access switch equipped with 24 data-only Gigabit downlinks and four dual-rate SFP+ 1G/10G fixed uplink ports, compatible with both Meraki Enterprise and Advanced tier cloud subscriptions. Powered by Meraki Dashboard single-pane centralized orchestration and supported by StackWise-320 high-speed stacking plus redundant 350W AC power supplies with no PoE power requirement, it delivers complete Layer 2 switching, tier-restricted Layer 3 dynamic routing, unified wired-wireless cross-site management and remote cloud automation. This model targets distributed multi-branch enterprises, general office environments and education networks prioritizing zero-touch remote cloud administration over traditional on-prem CLI or Cisco DNA Center deployment workflows, for workstation-only edge networks without PoE-powered endpoints and requiring economical high-performance 10G fiber aggregation uplinks.
|
