Full English Description for Cisco C9300L-48P-4G-A
1. Part Number Naming Breakdown
-
C9300L: Catalyst 9300 Lite cost-effective stackable fixed-uplink Layer 3 enterprise access switch built on UADP 2.0 ASIC
-
48P: 48× 10/100/1000BASE-T Gigabit RJ45 PoE+ ports (IEEE 802.3at PoE+, up to 30W per port)
-
4G: 4 integrated fixed 1G SFP uplink slots, only compatible with 1G SFP transceivers; 10G SFP+ modules unsupported
-
A: Pre-installed perpetual Network Advantage IOS XE license tier, unlocking full enterprise routing, SD-Access fabric, advanced security and complete automation feature set
C9300L Series Switch Chassis
2. Short Sales One-Liner (For BOM, Quotation & Datasheet Header)
Cisco Catalyst C9300L-48P-4G-A, 1RU stackable Layer3 PoE+ access switch, 48-port Gigabit PoE+ RJ45 downlinks, 4 fixed 1G SFP uplink interfaces, Network Advantage IOS XE license, StackWise-320 stacking, factory pre-installed 715W AC power supply with 505W PoE budget, high-density wired edge switch for IP phones, Wi-Fi APs, IP cameras and IoT endpoints requiring 1G fiber aggregation uplinks.
3. Complete Product Overview Paragraph
The Cisco Catalyst C9300L-48P-4G-A is a high-density fixed-uplink stackable Layer 3 PoE+ access switch within the Catalyst 9300 Lite portfolio, engineered for enterprise campuses, corporate offices, schools and branch networks deploying large volumes of powered endpoints including IP telephones, Wi-Fi 6 wireless access points, IP surveillance cameras and low-power IoT sensors. Equipped with 48 standard Gigabit PoE+ copper downlink ports and four built-in 1G SFP fiber uplinks, this chassis delivers wire-speed Layer 2 switching and full-featured enterprise Layer 3 routing enabled by the included Network Advantage license. It supports StackWise-320 stacking technology to aggregate up to 8 identical switches into a single logical switching domain, features dual hot-swappable 715W AC power supply bays delivering 505W native PoE+ power budget, and natively integrates with Cisco DNA Center for zero-touch provisioning, end-to-end network automation, full telemetry visibility and SD-Access TrustSec security group segmentation for unified campus fabric environments.
4. Detailed Hardware Interface Specifications
Downlink Copper Ports (48×RJ45 PoE+)
-
48 × 10/100/1000BASE-T Gigabit Ethernet ports, IEEE 802.3at PoE+ compliant, maximum 30W power output per port
-
Auto speed negotiation, auto-MDI/MDI-X, integrated cable diagnostics, EnergyWise intelligent port power management for idle endpoints
-
Hardware support for 128-bit & 256-bit AES MACsec link encryption
Fixed Uplink Interfaces
-
4 onboard dedicated SFP slots exclusively for 1G SFP transceivers (SX, LX, ZX, SFP-T copper modules supported)
-
No compatibility with 10G SFP+ transceivers; uplink bandwidth limited to 1G per port
Management & Auxiliary Ports
-
USB Type-A storage port for offline IOS image upload, configuration backup and log export
-
Dual console access: USB Type-C console port + Mini-USB B console port for local CLI administration
-
UID beacon LED push-button for rapid physical device identification in dense rack deployments
-
Rear StackWise-320 stacking connectors; stacking cable kits sold separately as optional accessories
Power & Physical Form Factor
-
Form Factor: 1RU standard 19-inch rack-mount chassis, dimensions 4.4 × 44.5 × 44.9 cm, weight 7.03 kg
-
Dual hot-swappable redundant AC power supply slots; factory pre-shipped with single 715W AC PSU (PWR-C1-715WAC-P)
-
PoE power budget: Single 715W PSU provides total 505W PoE+ capacity; dual redundant PSUs expand total PoE output for higher-density powered device deployments
-
Thermal design: Field-replaceable redundant variable-speed fan trays with overheat fault protection and front-panel status LED indicators
5. Core Hardware Performance Benchmarks
-
Standalone Switching Capacity: 176 Gbps
-
Standalone Forwarding Rate: 130.95 Mpps
-
StackWise-320 maximum stacked backplane bandwidth: 592 Gbps (stack of up to 8 C9300L switches)
-
MAC Address Table Size: 32,000 MAC forwarding entries
-
Shared Packet Buffer Memory: 16MB
-
Onboard Memory: 8GB DRAM, 16GB Flash storage
-
VLAN Support: Up to 4,094 802.1Q tagged VLANs; maximum 1,000 active STP VLANs & SVIs
-
QoS Hardware Queues: 8 priority hardware queues per port, full DSCP & 802.1p CoS mapping
-
Routing Table Scales: 32,000 IPv4 unicast routes, 16,000 IPv6 unicast routes, 8,000 multicast routes
-
Jumbo Frame Support: Up to 9198-byte jumbo frames
-
ACL Capacity: 5,120 ingress/egress ACL entries
-
Flexible NetFlow: Supports up to 64,000 active flow records
6. Full Layer 2 Standard Feature Suite
IEEE 802.1Q VLAN trunking, IEEE 802.3ad LACP EtherChannel (max 8 ports per bundle), complete spanning tree suite including PVST+, RPVST+, MSTP with BPDU guard, root guard, loop guard and UDLD; LLDP and CDP unified device discovery inventory, port security with sticky MAC allowlist learning, broadcast/multicast storm suppression, IGMP Snooping v1/v2/v3, SPAN/RSPAN remote port mirroring, private VLANs, voice VLAN auto-detection and traffic prioritization, hardware MACsec link encryption.
7. Network Advantage (-A License) Exclusive Layer 3, Security & Fabric Features
Full Enterprise Dynamic Routing Protocols
Static IPv4/IPv6 routing, RIP, OSPFv2/v3, full EIGRP, BGP, IS-IS, PIM ASM/SSM multicast routing, VRRP, HSRP, GLBP gateway redundancy, wire-speed inter-VLAN routing, dual-stack IPv4/IPv6 forwarding, VRF-lite, policy-based routing (PBR), MPLS edge functionality.
Advanced Enterprise Security Toolset
IEEE 802.1X multi-domain/multi-host authentication, MAB MAC bypass authentication, DHCP snooping, Dynamic ARP Inspection (DAI), IP Source Guard, CoPP control-plane policing, TrustSec SGT tagging & end-to-end segmentation, Adaptive Policy security group mapping, Encrypted Traffic Analytics (ETA), Cisco Secure Boot, hardware Trust Anchor Module, Cisco Umbrella DNS integration, multi-level RBAC admin access control, TLS/SSH/HTTPS encrypted management transport.
Automation, Visibility & SD-Access Fabric Capabilities
Native Cisco DNA Center integration, zero-touch provisioning (ZTP), NETCONF/RESTCONF/YANG/gRPC model-driven programmability, full Flexible NetFlow telemetry, complete SD-Access fabric support with virtual network segmentation, embedded Catalyst 9800 wireless controller, ThousandEyes application performance monitoring integration, unified stack-wide policy orchestration and cross-site topology visualization.
8. License Differentiator: Network Advantage (-A) vs Network Essentials (-E)
The suffix -A (Network Advantage) is Cisco’s top perpetual license tier for Catalyst 9300L fixed-uplink switches, with critical feature upgrades over entry-level -E Network Essentials:
-
Unlocks advanced routing protocols unavailable on -E: BGP, full EIGRP, MPLS, VRF-lite, policy-based routing
-
Native SD-Access fabric and TrustSec Adaptive Policy zero-trust segmentation support exclusive to -A models
-
Enables Encrypted Traffic Analytics (ETA), full DNA Center automation workflows and ThousandEyes application monitoring
-
No OSPF dynamic route count limitation (Network Essentials caps OSPF learned routes at 1,000)
All switches within a single StackWise stack must deploy identical license tiers to guarantee full stacking interoperability and consistent feature operation.
9. Datasheet Short Summary Paragraph
The Cisco Catalyst C9300L-48P-4G-A is a high-density PoE+ stackable Layer 3 access switch optimized for powered edge endpoints, equipped with 48 standard Gigabit PoE+ downlinks and four fixed 1G SFP fiber uplink ports. Powered by the full-feature Network Advantage IOS XE license, it delivers comprehensive Layer 2 switching, complete enterprise Layer 3 routing, advanced threat security, full DNA automation and native SD-Access fabric segmentation, supported by StackWise-320 high-speed stacking and redundant 715W AC power supplies with ample PoE+ power budget. It is the ideal wired edge solution for campus, corporate office and branch networks with high volumes of IP phones, wireless APs and surveillance cameras requiring cost-effective 1G fiber aggregation uplinks.
|
