Cisco GLC-BX80-U Full Official Product Description
1. Part Number & Naming Definition
Official Full Name
Cisco 1000BASE-BX80-U Bidirectional Single-Fiber SFP Optical Transceiver Module with DOM Support
SKU:GLC-BX80-U
Naming Breakdown
-
GLC: Gigabit Ethernet Small Form-Factor Pluggable Transceiver
-
BX: Bidirectional Single-Fiber WDM Optical Transmission
-
80: Maximum transmission reach of 80 kilometers
-
U: Upstream: Transmit 1490nm, Receive 1570nm (Must pair with GLC-BX80-D)
Core Product Positioning
The Cisco GLC-BX80-U is a hot‑swappable BiDi SFP optical transceiver adopting Wavelength Division Multiplexing (WDM). It delivers full-duplex Gigabit Ethernet overone single strand of single-mode fiber (SMF). It transmits optical signals at 1490 nm and receives at 1570 nm. This module must be deployed with the matchedGLC-BX80-D (TX1570nm / RX1490nm)on the opposite end of the fiber link. It supports DOM/DDM for real-time monitoring of optical operating parameters, designed for long-haul metro backbone and inter-campus links where fiber pairs are limited. For fiber spans shorter than 15 km, an inline optical attenuator is required to avoid receiver saturation.
2. Hardware & Software Compatibility
Supported Host Platforms
Cisco Catalyst 2960, 3560, 3650, 3750, 3850, 4500, 6500, 6800, 9200, 9300; IE Industrial Switches; ISR 1100/4000 Series; ASR 1000; Wireless Controllers; Firepower appliances equipped with SFP slots.
Supported IOS / IOS XE Versions
All mainstream Cisco IOS and IOS XE releases supporting SFP and DOM functionality.
Supported Fiber Type
Single‑Mode Fiber (OS1/OS2, 9/125μm) only; incompatible with multi-mode fiber
Unsupported Platforms
GBIC-only slots, SFP+/SFP28/QSFP ports without adapters, MDS storage switches.
Critical Note:GLC-BX80-U cannot communicate with another GLC-BX80-U; pairing with GLC-BX80-D is mandatory.
3. Physical & Optical Performance Specifications
Form Factor
Hot‑swappable SFP (mini‑GBIC) compliant with SFP MSA & SFF‑8472(DOM)
Optical Interface
-
Transmit Wavelength: 1490 nm
-
Receive Wavelength: 1570 nm
-
Connector: Simplex LC
-
Data Rate: 1.25 Gbps wire‑speed Gigabit Ethernet
Maximum Transmission Reach
-
Standard OS1/OS2 single‑mode fiber: Up to80 km
Optical Power Budget
-
Transmit Power: -2 dBm ~ +3 dBm
-
Receiver Sensitivity: Minimum -24 dBm
-
Maximum Allowable Received Power: 0 dBm
Digital Diagnostics
DOM / DDM (Digital Diagnostic Monitoring) Supported
Monitors module temperature, supply voltage, laser bias current, transmit optical power, receive optical power.
Environmental Operating Parameters (Commercial Grade)
-
Operating Temperature:0°C ~ +70°C (32°F ~ 158°F)
-
Storage Temperature: -40°C ~ +85°C (-40°F ~ 185°F)
-
Relative Humidity: 10% – 90%, non‑condensing
-
Maximum operating altitude: 3,000 meters
Typical Power Consumption
4. Supported Functional Capabilities
Ethernet Transport
Wire‑speed Gigabit Ethernet transmission, full‑duplex operation, 8b/10b line coding
Layer 2 Protocol Support
802.1Q VLAN trunking, 802.3x pause frame flow control, LACP, STP/RSTP/MSTP, EtherChannel link aggregation
Interface Diagnostics
Link status detection, packet error counters, DOM real-time optical telemetry, local loopback testing
High Availability
OIR hot‑swap capability on supported Catalyst chassis; link redundancy via spanning tree or port channels
Operations & Management
IOS / IOS XE CLI, SSH, SNMP v2c/v3, Syslog logging, DOM optical parameter polling
5. Typical Deployment Scenarios
-
Long-distance inter-campus and metro backbone fiber links with limited fiber resources
-
Enterprise wide-area connections over leased dark single-mode fiber within 80 km
-
Mobile backhaul and service provider metro Ethernet access deployments
-
Network upgrade projects to maximize utilization of existing single fiber strands
-
Spare replacement transceiver for SFP‑based Cisco enterprise switching and routing environments
6. Regulatory & Compliance Certifications
-
Safety Standards: UL 60950‑1, IEC/EN 60950‑1, CSA C22.2 No.60950‑1
-
EMC Compliance: CE Mark, FCC Part 15 Class A, ICES‑003 Class A, VCCI Class A
-
Laser Safety: Class 1 Laser Product per IEC 60825‑1
-
Standards: IEEE 802.3ah, SFP MSA, SFF‑8472
-
Environmental: RoHS compliant, WEEE directive compliant
7. Standard Factory Package Contents
-
Cisco GLC-BX80-U 1000BASE‑BX80-U BiDi SFP Optical Transceiver
-
Hardware installation guide
-
Safety and regulatory documentation
Note: Simplex LC fiber patch cables and matched GLC-BX80-D transceiver are sold separately.
End-of-Sale Status
Cisco GLC-BX80-U remains active and available for new orders.
Pairing Reference:GLC-BX80-U ↔ GLC-BX80-D
Range comparison: GLC-BX10-U(10km) < GLC-BX40-U(40km) <GLC-BX80-U(80km)
UNSPSC Classification Code
43222618 – Cisco GLC-BX80-U 1000BASE-BX80-U BiDi single-fiber SFP optical transceiver with DOM, hot‑swappable long-reach Gigabit single-mode fiber module for Cisco enterprise switches and routers.
Hardware Warranty
Original Cisco units carry Cisco limited hardware warranty; refurbished units follow reseller warranty terms.
|
