Cisco GLC-BX-U Full Official Product Description
1. Part Number & Naming Definition
Official Full Name
Cisco 1000BASE-BX10-U Bidirectional Single-Fiber SFP Optical Transceiver Module, DOM Supported
SKU:GLC-BX-U
Naming Breakdown
-
GLC: Gigabit Ethernet Small Form-Factor Pluggable Transceiver
-
BX: Bidirectional Single-Fiber WDM Optical Transmission
-
U: Upstream / Transmit 1310nm, Receive 1490nm (Must pair with GLC-BX-D)
Core Product Positioning
The Cisco GLC-BX-U is a hot‑swappable BiDi SFP transceiver compliant with IEEE 802.3ah 1000BASE-BX10-U standard. It delivers full-duplex Gigabit Ethernet overone single strand of single-mode fibervia Wavelength Division Multiplexing. It transmits at 1310 nm and receives at 1490 nm, and must be deployed with the matchedGLC-BX-D (TX1490/RX1310)at the opposite end of the fiber link. It supports DOM/DDM for real-time monitoring of optical operating parameters, suitable for network expansion scenarios with limited fiber pairs.
2. Hardware & Software Compatibility
Supported Host Platforms
Cisco Catalyst 2960, 3560, 3650, 3750, 3850, 4500, 6500, 6800, 9200, 9300; IE Industrial Switches; ISR 1100/4000 Series; ASR 1000; Wireless Controllers; Firepower appliances equipped with SFP slots.
Supported IOS / IOS XE Versions
All mainstream Cisco IOS and IOS XE releases supporting SFP and DOM functionality.
Supported Fiber Type
Single‑Mode Fiber (OS1/OS2, 9/125μm) only; incompatible with multi-mode fiber
Unsupported Platforms
GBIC-only slots, SFP+/SFP28/QSFP ports without adapters, MDS storage switches.
Critical Note:GLC-BX-U cannot communicate with another GLC-BX-U; pairing with GLC-BX-D is mandatory.
3. Physical & Optical Performance Specifications
Form Factor
Hot‑swappable SFP (mini‑GBIC) compliant with SFP MSA & SFF‑8472(DOM)
Optical Interface
-
Transmit Wavelength: 1310 nm
-
Receive Wavelength: 1490 nm
-
Connector: Simplex LC
-
Data Rate: 1.25 Gbps wire‑speed Gigabit Ethernet
Maximum Transmission Reach
-
Standard OS1/OS2 single‑mode fiber: Up to10 km
Optical Power Budget
-
Transmit Power: -9 dBm ~ -3 dBm
-
Receiver Sensitivity: Minimum -19.5 dBm
-
Maximum Allowable Received Power: -3 dBm
Digital Diagnostics
DOM / DDM (Digital Diagnostic Monitoring) Supported
Monitors module temperature, supply voltage, laser bias current, transmit optical power, receive optical power.
Environmental Operating Parameters (Commercial Grade)
-
Operating Temperature:0°C ~ +70°C (32°F ~ 158°F)
-
Storage Temperature: -40°C ~ +85°C (-40°F ~ 185°F)
-
Relative Humidity: 10% – 90%, non‑condensing
-
Maximum operating altitude: 3,000 meters
Typical Power Consumption
4. Supported Functional Capabilities
Ethernet Transport
Wire‑speed Gigabit Ethernet transmission, full‑duplex operation, 8b/10b line coding
Layer 2 Protocol Support
802.1Q VLAN trunking, 802.3x pause frame flow control, LACP, STP/RSTP/MSTP, EtherChannel link aggregation
Interface Diagnostics
Link status detection, packet error counters, DOM real-time optical telemetry, local loopback testing
High Availability
OIR hot‑swap capability on supported Catalyst chassis; link redundancy via spanning tree or port channels
Operations & Management
IOS / IOS XE CLI, SSH, SNMP v2c/v3, Syslog logging, DOM optical parameter polling
5. Typical Deployment Scenarios
-
Campus inter-building fiber links with insufficient available fiber pairs
-
Metropolitan network capacity expansion utilizing existing single fiber strands
-
Remote branch office interconnection within the 10 km transmission range
-
FTTB enterprise access Gigabit uplink deployments
-
Spare replacement transceiver for SFP‑based Cisco enterprise switching and routing environments
6. Regulatory & Compliance Certifications
-
Safety Standards: UL 60950‑1, IEC/EN 60950‑1, CSA C22.2 No.60950‑1
-
EMC Compliance: CE Mark, FCC Part 15 Class A, ICES‑003 Class A, VCCI Class A
-
Laser Safety: Class 1 Laser Product per IEC 60825‑1
-
Standards: IEEE 802.3ah, SFP MSA, SFF‑8472
-
Environmental: RoHS compliant, WEEE directive compliant
7. Standard Factory Package Contents
-
Cisco GLC-BX-U 1000BASE‑BX10-U BiDi SFP Optical Transceiver
-
Hardware installation guide
-
Safety and regulatory documentation
Note: Simplex LC fiber patch cables and matched GLC-BX-D transceiver are sold separately.
End-of-Sale Status
Cisco GLC-BX-U remains active and available for new orders.
Pairing Reference:GLC-BX-U ↔ GLC-BX-D
UNSPSC Classification Code
43222618 – Cisco GLC-BX-U 1000BASE-BX10-U BiDi single-fiber SFP optical transceiver with DOM, hot‑swappable Gigabit single-mode fiber module for Cisco enterprise switches and routers.
Hardware Warranty
Original Cisco units carry Cisco limited hardware warranty; refurbished units follow reseller warranty terms.
|
