Homepage | Collection | 繁体中文
Product
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
H3C
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
Contact Us


Company Name:Kino Technology Limited

Website:www.kino86.com

Address :Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China



Contact Person:kiki

Tel :+8613040881925 

E-mail:kiki@szkiki.com

Wechat:+8613040881925

Whatspp: +8613040881925

Teams:kiki@szkiki.com





Products
 Product >> Cisco >> ALL
 
Product_Id:
73016151216
ProductName:
WS-G5487
Specification:
Product Notes:
Product Category:
Cisco
 
   Product Description

Cisco WS-G5487 Full Official Product Description

1. Part Number & Naming Definition

Official Full Name

Cisco 1000BASE-ZX GBIC Optical Transceiver Module
SKU:WS-G5487

Naming Breakdown

  • WS: Cisco Catalyst Switch hardware identifier
  • G: Gigabit Ethernet
  • 5487: GBIC transceiver model identifier
  • ZX: Extended long-reach single-mode Gigabit optical specification

Core Product Positioning

The Cisco WS-G5487 is a hot‑swappable MSA‑compliant GBIC (Gigabit Interface Converter) optical transceiver for long-distance Gigabit Ethernet transport over single-mode fiber. Designed for legacy Catalyst modular switching platforms, it delivers extended fiber reach for inter-building campus links, metropolitan backbone connections and remote site inter-switch links. It operates exclusively with single-mode fiber and requires optical attenuators for short fiber spans below 25 km to prevent receiver overload.

2. Hardware & Software Compatibility

Supported Host Platforms

Cisco Catalyst 4000, 4500, 5000, 6000, 6500 Series modular switches with GBIC slots

Supported IOS Releases

All mainstream Cisco IOS versions supporting GBIC transceivers

Supported Fiber Type

Only Single‑Mode Fiber (SMF 9/125μm); incompatible with multi-mode fiber

Unsupported Platforms

SFP‑only switches, Nexus data center switches, MDS SAN directors, ISR routers
Note: GBIC cannot be inserted directly into SFP slots without an adapter.

3. Physical & Optical Performance Specifications

Form Factor

Hot‑swappable GBIC module compliant with GBIC MSA

Optical Interface

  • Operating Wavelength: 1550 nm (DFB laser)
  • Connector: Duplex SC
  • Data Rate: 1.25 Gbps wire‑speed Gigabit Ethernet

Maximum Transmission Reach

  • Standard single‑mode fiber: Up to70 km
  • Premium / dispersion‑shifted single‑mode fiber: Up to100 km
Important: An inline optical attenuator is mandatory for spans shorter than 25 km to avoid receiver saturation.

Optical Power Budget

  • Transmit Power: 0 dBm ~ +4 dBm
  • Receiver Sensitivity: Minimum -25 dBm

Digital Diagnostics

No Digital Diagnostic Monitoring Interface (DDMI) support

Environmental Operating Parameters

  • Operating Temperature: 0°C ~ 70°C (32°F ~ 158°F)
  • Storage Temperature: -40°C ~ 85°C (-40°F ~ 185°F)
  • Relative Humidity: 10% – 90%, non‑condensing
  • Maximum operating altitude: 3,000 meters

Typical Power Consumption

Approximately 1.6 W

4. Supported Functional Capabilities

Ethernet Transport

Wire‑speed Gigabit Ethernet transmission, auto‑negotiation, full/half duplex operation

Layer 2 Protocol Support

802.1Q VLAN trunking, 802.3x flow control, LACP, STP/RSTP/MSTP, EtherChannel aggregation

Interface Diagnostics

Link status detection, port error counters, local loopback diagnostics

High Availability

OIR hot‑swap capability on supported Catalyst chassis; link redundancy via spanning tree or port channels

Operations & Management

IOS CLI, SSH, SNMP v2c/v3, Syslog logging, real‑time interface statistics monitoring

5. Typical Deployment Scenarios

  1. Long-distance inter-building campus backbone connections over single-mode fiber
  2. Metropolitan area network (MAN) Gigabit fiber inter-switch links
  3. Remote site connectivity for geographically distributed enterprise networks
  4. Legacy Catalyst 6500 core switch long-range fiber uplink deployments
  5. Spare replacement transceivers for existing GBIC‑based Catalyst switching environments

6. Regulatory & Compliance Certifications

  1. Safety Standards: UL 60950‑1, IEC/EN 60950‑1, CSA C22.2 No.60950‑1
  2. EMC Compliance: CE Mark, FCC Part 15 Class A, ICES‑003 Class A, VCCI Class A
  3. Laser Safety: Class 1 Laser Product per IEC 60825‑1
  4. Environmental: RoHS compliant, WEEE directive compliant

7. Standard Factory Package Contents

  1. Cisco WS-G5487 1000BASE-ZX GBIC Transceiver
  2. Hardware installation guide
  3. Safety and regulatory documentation
Note: Fiber patch cables and optical attenuators are sold separately.

End-of-Sale Status

The WS-G5487 GBIC transceiver has reached Cisco End‑of‑Sale and End‑of‑Support. Spare inventory is available through authorized spare distributors and secondary hardware markets. Recommended migration: 1000BASE-ZX SFP transceivers for modern switching platforms.

UNSPSC Classification Code

43222618 – Cisco WS-G5487 1000BASE-ZX GBIC optical transceiver, hot‑swappable long-reach single-mode Gigabit fiber module for legacy Catalyst modular enterprise switches.

Hardware Warranty

Original factory units carry Cisco limited hardware warranty; refurbished equipment follows reseller commercial warranty terms.
Click:1 Entry Time:2026-07-30 【Print】 【Close
 © 2026 Kino Technology Limited. All Rights Reserved. | Hong Kong Registered · Shenzhen Operation | New & Genuine Used Network Equipment Supplier 
Links:   白云搜搜   |   未来互联   |   百度   |  
Kino Technology Limited   网站技术支持:未来互联