Homepage | Collection | 繁体中文
Product
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
H3C
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
Contact Us


Company Name:Kino Technology Limited

Website:www.kino86.com

Address :Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China



Contact Person:kiki

Tel :+8613040881925 

E-mail:kiki@szkiki.com

Wechat:+8613040881925

Whatspp: +8613040881925

Teams:kiki@szkiki.com





Products
 Product >> Cisco >> ALL
 
Product_Id:
73015302916
ProductName:
vEdge-1000-LTE-MODULE
Specification:
Product Notes:
Product Category:
Cisco
 
   Product Description

Cisco vEdge-1000-LTE-MODULE Full Official Product Description

1. Part Number & Naming Definition

Commercial Full Name

Cisco vEdge-1000 Compatible 4G LTE USB Cellular Modem Module
SKU:vEdge-1000-LTE-MODULE

Naming Breakdown

  • vEdge-1000: Target compatible Cisco Viptela SD-WAN branch router platform
  • LTE: 4G Long-Term Evolution cellular broadband transport
  • MODULE: External USB plug-and-play cellular modem accessory

Core Product Positioning

The Cisco vEdge-1000-LTE-MODULE is an external USB-based 4G LTE cellular modem designed to provide redundant wireless WAN connectivity for the Cisco vEdge-1000 SD-WAN router. It serves as a backup transport link for branch sites during primary Ethernet or MPLS circuit outages. When activated within the Viptela OS SD-WAN fabric, it supports policy-driven automatic failover, application-aware routing and encrypted IPsec overlay tunnels over cellular networks. It delivers resilient connectivity for remote branches, temporary deployment sites and disaster recovery networking scenarios.

2. Hardware & Software Compatibility

Supported Host Router

Cisco vEdge-1000 SD-WAN Router (Viptela OS)

Supported Operating Firmware

Viptela OS 18.x, 19.x, 20.x compatible releases

Interface Requirement

vEdge-1000 built-in USB 3.0 Type-A port

Supported SIM Format

Standard Mini-SIM (2FF)

Unsupported Platforms

vEdge-100, vEdge-2000, vEdge-5000, IOS XE ISR routers, Catalyst switching hardware

3. Physical & Performance Specifications

Form Factor

External USB plug-and-play cellular modem

Interfaces

  • 1 × USB Type-A host connector
  • 1 × Mini-SIM card slot
  • Dual SMA antenna connectors for MIMO cellular reception

Cellular Performance

  • LTE Category 4
  • Peak downlink: 150 Mbps
  • Peak uplink: 50 Mbps
  • Backward compatible with UMTS / HSPA+ (3G)

Supported LTE Bands

Region-dependent variants: Global (EU/APAC), North America carrier-certified options

Environmental Operating Parameters

  • Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F)
  • Storage Temperature: -40°C ~ 70°C (-40°F ~ 158°F)
  • Relative Humidity: 10% – 90%, non-condensing
  • Maximum operating altitude: 3000 meters

Typical Power Consumption

Approximately 5 W (powered directly via router USB port)

4. Supported Functional Capabilities

SD-WAN Transport Integration

Cellular interface recognized as standard transport within Viptela OS; participates in OMP overlay routing, SLA monitoring and application-aware routing policies

WAN Resilience

Automatic circuit failover from primary wired transport to LTE backup based on loss, latency and jitter SLA thresholds

Security Functions

IPsec tunnel encryption over cellular transport, NAT traversal, firewall policy enforcement, AAA and logging

Traffic Management

QoS queueing, bandwidth policing for cellular metered links, cellular connection idle timeout control

Monitoring & Diagnostics

Modem signal strength reporting, SIM status tracking, cellular interface statistics, Call Home event alerts

Operations & Management

Configuration via vEdge local CLI; centralized monitoring and provisioning via Cisco vManage SD-WAN controller

5. Typical Deployment Scenarios

  1. Backup redundant WAN transport for branch office vEdge-1000 SD-WAN deployments
  2. Temporary pop-up site, construction site or field office primary cellular internet connectivity
  3. Disaster recovery failover link for sites vulnerable to fixed-line service interruptions
  4. Remote retail, kiosk and unattended branch resilient networking
  5. Spare replacement cellular modem hardware for existing vEdge-1000 SD-WAN environments

6. Regulatory & Compliance Certifications

  1. Safety Standards: UL 60950-1, IEC/EN 60950-1, CSA C22.2 No.60950-1
  2. EMC Compliance: CE Mark, FCC Part 15 Class B, ICES-003 Class B, VCCI Class B
  3. Cellular Approvals: PTCRB, GCF carrier certification (region variant dependent)
  4. Environmental: RoHS 2.0 compliant, WEEE directive compliant

7. Standard Factory Package Contents

  1. vEdge-1000-LTE-MODULE 4G LTE USB Cellular Modem
  2. Pair of MIMO cellular antennas
  3. Hardware installation documentation
  4. Safety and regulatory compliance guides
Note: SIM card, cellular data plan and service subscription are sold separately.

End-of-Sale Status

This accessory belongs to legacy Viptela vEdge hardware ecosystem and has reached Cisco End-of-Sale. Spare stock is available via authorized spare distributors and secondary hardware markets. Recommended migration path: IOS XE SD-WAN ISR routers with internal pluggable LTE modules.

UNSPSC Classification Code

43222633 – Cisco vEdge-1000-LTE-MODULE, USB 4G LTE cellular backup modem for vEdge-1000 Viptela SD-WAN routers, providing resilient wireless WAN transport for enterprise branch overlay networks.

Hardware Warranty

Original factory hardware carries Cisco limited hardware warranty; refurbished units follow reseller commercial warranty terms.

Click:1 Entry Time:2026-07-30 【Print】 【Close
 © 2026 Kino Technology Limited. All Rights Reserved. | Hong Kong Registered · Shenzhen Operation | New & Genuine Used Network Equipment Supplier 
Links:   白云搜搜   |   未来互联   |   百度   |  
Kino Technology Limited   网站技术支持:未来互联