Cisco C9200-PWR-370W Full Official Product Description
1. Part Number & Naming Definition
Market Reference Name
Cisco Catalyst 9200 Series Hot-Swappable 600W AC Power Supply (370W PoE Output)
Market SKU:C9200-PWR-370W
Official Cisco Spare Part Number:PWR-C5-600WAC= / PWR-C6-600WAC=
Naming Breakdown
-
C9200: Catalyst 9200 enterprise stackable switching platform
-
PWR: Power supply module
-
370W: Maximum available PoE+ power budget under single power supply deployment
Core Product Positioning
The Cisco C9200-PWR-370W (PWR-C5/C6-600WAC) is a high-efficiency hot-swappable alternating current power supply designed for Cisco Catalyst 9200 and C9200L Series stackable switches. The total module power capacity is 600W, providing up to 370W PoE+ power for IP phones, wireless access points and IP surveillance cameras when deployed alone. When two identical units are installed redundantly, combined PoE capacity increases to 740W. This FRU module supports OIR, redundant power architecture and StackWise stacking environments for branch and campus access networks.
2. Hardware Compatibility
Supported Switch Chassis
Cisco Catalyst 9200, C9200L Series fixed stackable switches
Applicable models: C9200-24P, C9200L-24P-4G, C9200L-24P-4X, C9200L-48PL series PoE-capable switches
Supported Operating System
Cisco IOS XE for Catalyst 9200 Platform
Unsupported Platforms
Catalyst 9300, Catalyst 3850, Catalyst 2960XR, Nexus switches, ISR/ASR routers
3. Electrical & Physical Specifications
Form Factor
Front-load hot-swappable FRU power supply with mechanical eject latch; supports OIR (Online Insertion and Removal)
Airflow Direction
Front-to-back airflow (Port-side intake, rear exhaust), matching Catalyst 9200 native thermal design
AC Input Parameters
-
Input Voltage: 100–240 VAC universal auto-ranging
-
Frequency: 50 / 60 Hz
-
Active Power Factor Correction
Output Specifications
-
Total rated module power: 600W
-
Usable PoE power (single PSU): 370W
-
Combined PoE power (dual redundant PSUs): 740W
-
Energy efficiency: High-efficiency design compliant with industry power standards
Built-In Protection Mechanisms
Overvoltage protection, overcurrent protection, short-circuit protection, overtemperature auto-shutdown
Front-panel LED indicators for power-good and fault status
Typical Weight
Approx. 1.15 kg (2.54 lbs)
Environmental Operating Parameters
-
Operating Temperature: -5°C to 45°C (23°F – 113°F)
-
Storage Temperature: -40°C to 70°C (-40°F – 158°F)
-
Relative Humidity: 5% – 90%, non-condensing
-
Maximum operating altitude: 3,000 meters (9,842 ft)
4. Supported Functional Capabilities
High Availability Operation
Full OIR support; power supply replacement without switch reboot or service interruption
Supports dual redundant load-sharing power configuration to eliminate single power failure risk
Power Monitoring & Management
Real-time voltage, current and temperature telemetry via IOS XEshow environmentcommand
Fault notifications via console logs, Syslog and SNMP v2c/v3 traps
Electronic serial number readable for asset lifecycle tracking
Intelligent Thermal Control
Internal variable-speed fan adjusts rotation speed dynamically based on internal temperature to balance cooling performance and acoustic noise
5. Typical Enterprise Deployment Scenarios
-
Primary power supply for 24-port PoE+ Catalyst 9200 access switches in enterprise campus and branch offices
-
Power delivery for medium-density PoE endpoints including IP phones, enterprise Wi-Fi APs and security cameras
-
Spare inventory for maintenance and hardware lifecycle refresh of Catalyst 9200 switch fleets
-
StackWise stacked access switch deployments requiring flexible PoE power budgeting
-
Remote branch office networking with moderate PoE device load requirements
6. Regulatory & Compliance Certifications
-
Safety Standards: UL 60950-1, IEC/EN 60950-1, CSA C22.2 No.60950-1
-
EMC Compliance: CE Mark, FCC Part 15 Class A, ICES-003 Class A, VCCI Class A
-
Environmental: RoHS 2.0 compliant, WEEE directive compliant
7. Standard Factory Package Contents
-
Cisco C9200-PWR-370W (PWR-C5/C6-600WAC) 600W AC Power Supply Module
-
Hardware installation instruction sheet
-
Safety and regulatory documentation
AC power cord sold separately
End-of-Life Status
Catalyst 9200 product family remains active within Cisco product lifecycle. Spare power supply modules are continuously available via authorized Cisco distribution channels. Long-term migration platform: Catalyst 9300 Series switches.
UNSPSC Classification Code
43222617 – Cisco C9200-PWR-370W hot-swappable AC power supply for Catalyst 9200 stackable enterprise switches, supporting OIR and redundant power deployment to deliver 370W PoE+ power for branch and campus access layer switching infrastructure.
Hardware Warranty
Original Cisco factory spare units carry limited manufacturer warranty. Refurbished hardware follows reseller commercial warranty agreements.
|
