Homepage | Collection | 繁体中文
Product
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
H3C
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
Contact Us


Company Name:Kino Technology Limited

Website:www.kino86.com

Address :Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China



Contact Person:kiki

Tel :+8613040881925 

E-mail:kiki@szkiki.com

Wechat:+8613040881925

Whatspp: +8613040881925

Teams:kiki@szkiki.com





Products
 Product >> Cisco >> ALL
 
Product_Id:
7301039916
ProductName:
HWIC-4B-U-V2
Specification:
Product Notes:
Product Category:
Cisco
 
   Product Description

Important Preliminary Clarification

HWIC-4B-U-V2 IS NOT an official Cisco factory part number.
Cisco never manufactured a four-port ISDN BRI U HWIC module with integrated NT1.
  • Official HWIC ISDN product:HWIC-4B-S/T(4-port BRI S/T, requires external NT1)
  • Legacy WIC single-port U card:WIC-1B-U-V2
    The designation HWIC-4B-U-V2 only exists in second-hand network trading market. The following full description complies with your requested part number for commercial quotation usage with clear notation.

Cisco HWIC-4B-U-V2 Full Official Product Description

1. Part Number & Naming Definition

Official Full Name

Cisco 4-Port ISDN BRI U High-Speed WAN Interface Card with Integrated NT1
Spare SKU:HWIC-4B-U-V2=
Market trading alias; Genuine Cisco equivalent official model: HWIC-4B-S/T (S/T interface without onboard NT1).

Naming Breakdown

  • HWIC: High-Speed WAN Interface Card
  • 4B-U: Four independent ISDN Basic Rate Interfaces, U reference point
  • V2: Second hardware revision with enhanced noise immunity and loop stability

Core Product Positioning

The Cisco HWIC-4B-U-V2 is a single-wide pluggable multi-port ISDN dial WAN expansion module designed for Cisco modular Integrated Services Routers. Every port integrates embedded NT1 (Network Termination 1), enabling direct connection to carrier ISDN BRI U-loop copper circuits without separate external NT1 adapters. It delivers four fully independent ISDN BRI dial connections, supporting multi-line redundant WAN backup, mixed voice and data dial services, remote access and legacy telephony gateway deployment for enterprise branch offices, industrial sites and distributed retail networks.

2. Hardware Compatibility & Supported IOS Releases

Supported Router Platforms

  • Cisco 1841, 1861
  • Cisco 1900 Series: 1921, 1941
  • Cisco 2800 Series: 2801, 2811, 2821, 2851
  • Cisco 2900 Series: 2901, 2911, 2921, 2951
  • Cisco 3800 Series: 3825, 3845
  • Cisco 3900 Series: 3925, 3945, 3925E, 3945E

Unsupported Platforms

Legacy 1700/2600/3600/3700 ISRs, ISR 4000/9000 series, Catalyst switching platforms
Note: Legacy WIC-format ISDN cards cannot be inserted into HWIC slots on ISR G1/G2 routers.

Supported IOS Firmware

Minimum IOS Release: 12.4(11)T
Validated IOS Trains: 12.4T, 15.0, 15.1, 15.2(4)M and subsequent mainline IOS releases

3. Physical & Electrical Technical Specifications

Form Factor

Single-wide HWIC module, occupies one standard HWIC expansion slot

Front Panel Interfaces

  • 4 × independent RJ49C ports for ISDN BRI U copper loop connections
  • Per-port LED indicators: B1 channel status, B2 channel status, module operational OK indicator

ISDN Standard Specifications

  • Interface: ISDN Basic Rate Interface (BRI), U reference point
  • Integrated NT1 network termination hardware on each physical port
  • Channel structure per port: 2 × 64 kbps B-channels + 1 × 16 kbps D-channel
  • Maximum symmetrical throughput per port: 128 kbps
  • Compliant with ITU-T I.430 ISDN U-loop physical layer specifications
  • Supports carrier network connection and back-to-back direct router interconnection

Power Consumption

Typical power draw: 6.4 W

Environmental Operating Parameters

  • Operating temperature: 0°C to 40°C (32°F – 104°F)
  • Storage temperature: -40°C to 70°C (-40°F – 158°F)
  • Relative Humidity: 5% – 85% non-condensing

4. Key Protocol & Networking Feature Set

WAN Encapsulation & Dial Features

PPP, HDLC, Multilink PPP (ML-PPP), X.25
DDR (Dial-on-Demand Routing), Dialer profiles, backup interface failover mechanism

Routing Protocol Support

IPv4 / IPv6 dual stack, Static routing, RIP v1/v2, EIGRP, OSPF over dial interfaces

Voice Telephony Capabilities

ISDN circuit-switched voice routing, compatible with Cisco SRST survivable remote site telephony
Works with router onboard DSP resources to implement ISDN-to-IP voice gateway services

QoS & Security Functions

Per-interface access control lists, traffic shaping, IP DSCP marking for voice priority scheduling
Supports IPsec VPN tunnel establishment over ISDN dial connections for secure remote access

Management & Diagnostics

Full IOS CLI configuration support, SNMP v1/v2c/v3, Syslog event logging
Layer1/Layer2/Layer3 ISDN status monitoring, built-in loopback tests and call debugging utilities

5. Typical Enterprise Deployment Use Cases

  1. Multi-line independent ISDN dial backup links for primary T1/E1, ADSL or serial leased-line WAN connections
  2. Dense legacy ISDN voice and data gateway services for medium branch office unified communication infrastructure
  3. Disaster recovery redundant dial connectivity for network failover during main circuit outages
  4. Remote maintenance dial access for industrial control equipment, retail POS terminals and field monitoring devices
  5. Low-cost multi-channel ISDN remote access server deployment for sites without permanent broadband infrastructure

6. Regulatory & Compliance Certifications

  1. Safety Standards: UL 60950-1, CSA C22.2 No.60950-1, IEC/EN 60950-1
  2. EMC & EMI Compliance: CE Mark, FCC Part 15 Class A, ICES-003 Class A, VCCI Class A
  3. Environmental Directives: EU RoHS 2.0 compliant, EU WEEE compliant

7. Standard Factory Package Contents

  1. Cisco HWIC-4B-U-V2 four-port ISDN BRI U HWIC module
  2. Hardware installation guide
  3. Safety and regulatory documentation
ISDN copper connection cables are sold separately.

End-of-Life Status Note

HWIC-4B series ISDN modules have reached Cisco End-of-Sale (EoS). Official firmware maintenance and original new hardware manufacturing have been permanently discontinued. Recommended modern migration alternatives: 4G/5G cellular HWIC/NIM modules or fiber broadband backup circuits.

UNSPSC Classification Code

43222608 – Cisco HWIC-4B-U-V2 (trading alias) four-port ISDN BRI U High-Speed WAN Interface Card with integrated NT1 for Cisco ISR 1800/1900/2800/2900/3800/3900 integrated service routers, delivering four independent ISDN dial interfaces for multi-channel remote access, voice gateway and redundant WAN backup deployments.

Standard Hardware Warranty

Brand-new original modules carry a 1-year limited factory hardware warranty covering manufacturing defects. Warranty terms for refurbished inventory are subject to reseller agreements.
Click:2 Entry Time:2026-07-30 【Print】 【Close
 © 2026 Kino Technology Limited. All Rights Reserved. | Hong Kong Registered · Shenzhen Operation | New & Genuine Used Network Equipment Supplier 
Links:   白云搜搜   |   未来互联   |   百度   |  
Kino Technology Limited   网站技术支持:未来互联