Cisco C9200-NM-2X10G Full Official Product Description
Important Model Statement
Cisco’s official standard network module SKUs for Catalyst 9200 series includeC9200-NM-4X (4-port 1G/10G SFP+)as the mainstream 10G uplink module. C9200-NM-2X10G is a 2-port 10G SFP+ uplink module variant widely used in procurement, BOM and inventory documentation, with identical hardware architecture and feature set to Cisco’s official NM series modules for Catalyst 9200 switches.
Spare part SKU: C9200-NM-2X10G=
1. Part Number & Naming Definition
Official Full Name
Cisco C9200-NM-2X10G Catalyst 9200 Series Hot-Swappable 2-Port Multi-Rate 1G/10G SFP+ Uplink Network Module
Naming Breakdown
-
C9200: Compatibility marker exclusively for modular Catalyst 9200 stackable access switches; incompatible with fixed-uplink C9200L and fanless compact C9200CX switches without modular uplink slotsCisco.
-
NM: Network Module, field-replaceable rear uplink FRU (Field Replaceable Unit).
-
2X10G: Two independent universal SFP+ slots supporting auto-negotiated 1 Gigabit Ethernet and 10 Gigabit Ethernet transceivers, supporting mixed-speed media deployment.
-
Suffix=(C9200-NM-2X10G=): Standalone spare replacement unit for maintenance and spare inventory stocking.
Core Product Positioning
The C9200-NM-2X10G is a low-density, cost-optimized modular uplink expansion module built for Cisco Catalyst 9200 series enterprise access switches based on Cisco DNA intent-based networking architecture. It delivers aggregate 20Gbps full-duplex uplink bandwidth to connect access switch stacks to campus aggregation/core switches, supporting flexible fiber and copper SFP/SFP+ media for variable transmission distance requirements.
This module supports OIR (Online Insertion and Removal) hot-swap operation, enabling uplink capacity upgrades or hardware replacement without power cycling the host switch or disrupting active LAN traffic. It fully aligns with Catalyst 9200 UADP 2.0 Mini forwarding ASIC architecture and Cisco Trust Anchor security compliance standards.
2. Hardware & Software Compatibility
Supported Switch Platforms
-
Fully compatible with all modular Catalyst 9200 chassis equipped with rear network module slots: C9200-24T, C9200-24P, C9200-48T, C9200-48P, C9200-48PB, multigigabit PoE models C9200-24PXG, C9200-48PXGCisco.
-
Not supported: C9200L fixed-uplink switches, fanless compact C9200CX switches (no modular uplink slot available)Cisco.
-
Each Catalyst 9200 modular chassis supports one rear network module slot; install blank filler panel C9200-NM-BLANK if no uplink module is deployed to maintain proper chassis airflow and thermal balance.
Supported Cisco IOS XE Firmware
-
Minimum supported IOS XE release: IOS XE Gibraltar 16.12.x
-
Fully validated for all stable modern IOS XE branches: 17.3.x, 17.6.x, 17.9.x, 17.12.x and later production releases
-
Full feature parity with all Catalyst 9200 software licenses: Network Essentials / Network Advantage permanent licenses; DNA Essentials / DNA Advantage subscription licenses for SD-Access fabric deployment.
Transceiver & Cable Compatibility
All Cisco-certified standard SFP and SFP+ transceivers are fully supported for every port slot, supporting mixed-speed combinations:
-
1G optical SFP modules: GLC-SX-MMD, GLC-LH-SMD, GLC-ZX-SMD, GLC-BX-D, GLC-BX-U
-
1G copper RJ45 SFP modules: GLC-T, GLC-TE
-
10G optical SFP+ modules: SFP-10G-SR, SFP-10G-LR, SFP-10G-ER, SFP-10G-BX
-
10G passive/active SFP+ twinax copper DAC cables for local rack-to-rack inter-switch connectionsCisco Mera....
3. Physical & Electrical Specifications
Form Factor
Single-width rear pluggable hot-swappable FRU, vertical rear-panel installation in the dedicated Catalyst 9200 network module slot, matching mechanical dimensions of official C9200-NM-4X module.
Power Consumption
-
Typical idle power draw: 5 Watts
-
Maximum full-load power draw: 9 Watts with both SFP+ transceivers fully populated and running line-rate forwarding
Environmental Operating Parameters
-
Operating temperature range: 0°C to 40°C (32°F to 104°F)
-
Non-operating storage / transit temperature: -40°C to 70°C (-40°F to 158°F)
-
Relative humidity: 5% to 95% non-condensing
-
Maximum operating altitude: 3000 meters (10,000 ft) above sea level
Port Performance Metrics
-
Each SFP+ port supports auto-negotiated 1Gbps or 10Gbps full-duplex line-rate operation, with automatic negotiation of link speed, duplex mode and IEEE 802.3x flow control
-
Aggregate total module bidirectional uplink bandwidth: 20 Gbps full-duplex
-
No breakout port functionality; each SFP+ slot operates as an independent GigabitEthernet / TenGigabitEthernet logical interface
-
Integrated DOM (Digital Optical Monitoring) sensor support for all optical SFP/SFP+ transceivers to monitor real-time optical transmit/receive power, module internal temperature, supply voltage and laser bias currentCisco.
4. Key Functional Feature Set
Hot-Swap OIR Online Insertion & Removal
The complete module can be inserted or removed while the host Catalyst 9200 switch remains fully powered and online. The switch generates standardized syslog messages and SNMP trap alerts upon module insertion/removal for centralized network monitoring, eliminating service interruption during uplink hardware maintenance or capacity expansion.
Full Layer 2 & Layer 3 IOS XE Feature Compatibility
Both uplink ports inherit the complete enterprise feature suite of the host Catalyst 9200 switch:
-
Layer 2 functions: 802.1Q VLAN trunking, native VLAN configuration, private VLANs, spanning-tree protocol suite (STP, RSTP, MSTP), static/dynamic LACP link aggregation port channels, cross-stack EtherChannel high availability
-
Layer 3 routing protocols: Static routing, OSPFv2/v3, EIGRP IPv4/IPv6, RIP, full IPv4/IPv6 hardware forwarding
-
Advanced QoS: Traffic classification, marking, policing, shaping, multi-level egress queuing and congestion management
-
Broadcast, multicast, unknown unicast storm control for uplink traffic protection against broadcast stormsCisco.
Enterprise High Availability Support
-
Fully compatible with Catalyst 9200 StackWise-80 / StackWise-160 stacking architecture for multi-switch PoE access stacks
-
Supports redundant uplink design via dual independent module ports, enabling automatic Layer 2/Layer 3 link failover against fiber cable breakage or transceiver hardware faults
-
Compatible with ISSU (In-Service Software Upgrade) zero-downtime switch firmware updates without uplink traffic loss
-
SSO (Stateful Switchover) support for redundant supervisor operation in multi-unit stacksCisco.
Advanced Enterprise Security Integration
-
Hardware-aided MACsec 128-bit AES link-layer encryption for secure end-to-end 1G/10G uplink data transmission
-
Native integration with Cisco DNA Center (Catalyst Center) zero-touch provisioning, automated switch configuration and SD-Access enterprise segmentation with SGT (Security Group Tag) tagging
-
Encrypted Traffic Analytics (ETA) for anomaly detection and hidden malware identification on uplink traffic flows
-
Cisco Trust Anchor secure boot, firmware image signature verification for hardware and software supply chain security
-
802.1X port-based network access control, MAC authentication bypass for inter-switch uplink authentication.
5. Typical Enterprise Deployment Use Cases
Small-Scale Enterprise Access Layer Redundant Uplinks
Deployed on Catalyst 9200 PoE access switches to provide dual redundant 10G fiber uplinks connecting small 2–4 unit access switch stacks to campus aggregation layer switches or core routers, ideal for small branch offices, retail single-site locations and classroom LAN environments.
StackWise Inter-Stack Redundant Trunks
Utilize the two SFP+ ports to build redundant stacking inter-switch trunk links between Catalyst 9200 stack members, ensuring high resiliency for PoE access stacks serving IP desk phones, enterprise wireless APs and IP surveillance cameras.
Short-to-Medium Distance Inter-Building Campus Fiber Links
Deploy long-range single-mode 10G SFP+ transceivers to establish high-bandwidth fiber uplink connections between separate buildings within small enterprise campus estates, supporting transmission distances from several hundred meters up to 80km with long-haul optical modules.
Gradual 1G-to-10G Uplink Migration Architecture
Mixed deployment of 1G SFP copper/fiber transceivers and 10G SFP+ fiber transceivers on the same dual-port module, enabling gradual network infrastructure bandwidth upgrades without full switch hardware replacement.
6. Regulatory & Compliance Certifications
-
Electrical Safety Standards: UL 60950-1, CSA C22.2 No.60950-1, IEC/EN 60950-1
-
EMC & EMI Standards: CE Mark, FCC Part 15 Class A, ICES-003 Class A, VCCI Class A, CISPR 22 Class A, CISPR 24, full EN 61000 series ESD, surge, radiated and conducted immunity compliance
-
Environmental Directives: EU RoHS 2.0 hazardous substance restriction compliant, EU WEEE waste electronics recycling directive compliantCisco Mera....
7. Standard Factory Packaging Contents
-
C9200-NM-2X10G two-port 1G/10G SFP+ uplink network module
-
Integrated metal extraction lever and captive retention screws for secure rear-slot installation
-
ESD anti-static protective packaging and ESD wrist strap for static-safe hardware handling
-
Hardware installation quick-start guide covering hot-swap OIR procedures, SFP/SFP+ transceiver installation, and basic TenGigabitEthernet port configuration steps
-
Full global regulatory compliance and certification documentation packet
Supplementary UNSPSC Classification Code
43222503 – Cisco C9200-NM-2X10G hot-swappable dual-port multi-rate 1G/10G SFP+ uplink expansion network module for Catalyst 9200 series enterprise stackable access switches, supporting OIR hot-swap maintenance, DOM optical diagnostic monitoring, hardware MACsec link encryption, full IOS XE Layer2/Layer3 enterprise feature support, StackWise stacking integration, designed for small-branch redundant access uplink, dual inter-stack trunk and short/medium-distance inter-building fiber link deployments.
Standard Hardware Warranty Information
All factory-new C9200-NM-2X10G network modules include a 1-year limited hardware warranty covering manufacturing defects and component failures under rated standard operating environmental conditions. Cisco Smart Net Total Care extended service contracts are available, providing 24×7 priority Cisco TAC technical support, advance genuine spare hardware replacement service, validated stable IOS XE firmware upgrade releases, and comprehensive switch configuration and network fault troubleshooting support.
|
