Cisco Meraki MR16-HW Full English Description

Listing Title

Full Commercial Product Description

1. Automatic Cloud RF Optimization + Integrated Full-Band Spectrum Analyzer: Continuous background RF scanning monitors the entire 2.4GHz and 5GHz spectrum to detect non-Wi-Fi interference (microwaves, Bluetooth equipment, industrial motors) and rogue wireless transmitters. The Meraki cloud dynamically adjusts AP channel selection, transmit power and client roaming thresholds to maintain stable wireless performance without dedicated RF engineering staffCisco.
2. Self-Healing Multi-Hop Wireless Mesh Networking: No wired Ethernet cabling is required for hard-to-reach coverage zones (remote classroom wings, back retail storage areas). MR16 APs form self-healing wireless mesh backhaul links; if the primary wired uplink fails, the AP automatically switches to mesh routing to preserve client internet connectivity, supporting multiple mesh gateway load balancing for scalable distributed coverage.
3. Layer7 DPI Application-Aware Traffic Shaping & WMM QoS: Built-in deep packet inspection classifies all wireless client traffic by application type (VoIP, video conferencing, P2P file sharing, streaming media). Administrators set granular priority rules to prioritize mission-critical business voice and video traffic while enforcing configurable bandwidth caps on recreational streaming and file-sharing traffic to avoid wireless network congestion during peak hours.
4. Unified Enterprise Security & Branded Captive Portal Guest Access: Native AES hardware encryption, WPA2-Enterprise 802.1X authentication with Active Directory/LDAP identity integration, one-click isolated guest internet-only access, identity-based policy firewalls and Meraki Teleworker VPN for secure remote branch corporate LAN extension without client-side VPN software on end devices.

Dual-Concurrent 2.4GHz + 5GHz Radio Hardware Architecture

1. 2.4GHz 802.11n Wireless Radio: 2×2 MIMO with two independent spatial streams, supports 20MHz and 40MHz channel bandwidths, MRC receive diversity, transmit beamforming, CSD cyclic shift diversity and A-MPDU/A-MSDU packet aggregation.
   • Operating frequency range: 2412–2484 MHz ISM band
   • Maximum single-band PHY throughput: 300 Mbps
   • Integrated non-detachable omnidirectional internal antennas optimized for uniform wide-area indoor coverage
2. 5GHz 802.11n Wireless Radio: 2×2 MIMO with two independent spatial streams, supports 20MHz and 40MHz channel bandwidths, DFS radar frequency avoidance, MRC receive diversity and transmit beamforming.
   • Operating frequency range: 5180–5320 MHz, 5745–5845 MHz UNII bands
   • Maximum single-band PHY throughput: 300 Mbps
   • Integrated non-detachable omnidirectional internal antennas with reduced adjacent-channel interference

Core Hardware Interfaces

1. Primary Uplink Port (Eth0): 10/100/1000BASE-T Gigabit RJ45 port, IEEE 802.3af Class 3 PoE PD compatible (24–57V DC PoE input). This port handles uplink connectivity to the corporate LAN switch, accepts PoE power supply, and supports static IP address configuration for network management.
2. Secondary Auxiliary Port (Eth1): 10/100BASE-T Fast Ethernet RJ45 port, non-PoE capable, only DHCP-assigned IP address supported. Designed for connecting stationary wired peripheral devices such as IP phones, network printers or POS payment terminals to extend wired LAN coverage via the wireless AP’s uplink.
3. Control & Security Hardware Components: Recessed factory reset button (short press = reboot; hold 5+ seconds = full factory config erase), anti-tamper concealed cable bay, security screw mounting holes, Kensington physical anti-theft lock hardpoint integrated into chassis.
4. Status Indicator LED Array: Multi-color LED indicators to display power status, Meraki cloud dashboard connectivity, wireless radio active state and hardware fault alarm notifications.
5. No external RF antenna ports; all antennas are factory-integrated within the AP chassis.

Supported Operation Modes

1. Cloud-Managed CAPWAP Access Point Mode (Default): Zero-touch Meraki cloud dashboard orchestration for all wireless client access, RF tuning, security and policy control.
2. Wireless Mesh Backhaul Node Mode: Multi-hop self-healing wireless mesh routing to extend coverage to zones without wired Ethernet uplinks, supporting automatic failover between wired and wireless mesh gateways.
3. Wired LAN Extension Mode: Utilizes secondary Fast Ethernet port to connect stationary wired peripheral devices to the corporate network via the AP’s primary uplink.

Key Cloud-Managed Software & Business Feature Set

1. Meraki Cloud Dashboard Zero-Touch Provisioning

2. Multi-SSID & 802.1Q VLAN Segmentation

3. Secure Branded Captive Portal Guest Access

4. Layer7 DPI Application-Aware QoS Traffic Prioritization

5. Comprehensive Enterprise Wireless Security Suite

• Encryption Standards: WEP, WPA-PSK, WPA2-PSK personal encryption; WPA2-Enterprise AES hardware acceleration with IEEE 802.1X EAP-TLS/PEAP/Fast authentication suites.
• Identity Integration: Native Active Directory, LDAP and RADIUS server identity database integration for enterprise user authentication and role-based access control.
• Auxiliary Security Features: Rogue AP detection and automatic containment via integrated spectrum analyzer, hidden SSID broadcast suppression, wireless client isolation, Meraki Teleworker VPN for secure remote branch corporate LAN extension, identity policy firewall for granular user/device network access control.

6. Unified Cloud Management Interfaces

• Meraki Cloud Dashboard: Centralized web-based graphical management platform accessible via any internet-connected browser; provides full AP configuration, real-time wireless client monitoring, historical network performance reporting, bulk firmware upgrades and customizable email/SMS fault alert notification functions for all deployed MR16 access points across multiple branch locations.
• Meraki Mobile Dashboard App: Smartphone/tablet mobile application for on-the-go real-time wireless network monitoring and basic configuration adjustments.
• SNMP v2c/v3 network monitoring integration: Compatible with mainstream third-party enterprise network monitoring and SCADA platforms.
• Centralized cloud event logging and customizable email/SMS fault alert notifications for network audit tracking and real-time issue reporting.

Power Supply Compatibility

1. Full-performance PoE operation: IEEE 802.3af Class 3 PoE PD input via primary Gigabit uplink port, powered by PoE-capable Gigabit switches or dedicated Meraki PoE injectors.
2. Local DC power alternative: Separate 12V / 1.5A external DC power adapter (sold separately, not bundled with standard AP packaging), 18W maximum output power.
3. Typical full-load power consumption: Maximum 8W under simultaneous active dual-radio operation with both Ethernet ports populated.

Physical & Environmental Specifications

• Dimensions (W × D × H): 218 mm × 157 mm × 36 mm (8.6” × 6.2” × 1.4”) excluding mounting hardware or desktop stand feet
• Unit Weight: 500 g (17 oz), lightweight white low-profile plastic chassis
• Mounting Options: Desktop placement with anti-slip rubber feet, vertical wall mounting, flush ceiling T-bar grid mounting (compatible with standard ceiling rails via third-party ceiling box hanger) via bundled universal mounting bracket and full hardware kit
• Plenum Rating: UL2043 certified for installation inside building air-handling plenum spaces above suspended ceiling tiles
• Operating Temperature Range: 0°C ~ +40°C indoor use only (not rated for outdoor deployment)
• Storage Temperature Range: -20°C ~ +70°C
• Operating Humidity: 5% – 95% non-condensing
• Storage Humidity: 5% – 90% non-condensing
• System Memory & Storage: Embedded Meraki custom cloud-managed operating system, dedicated wireless processing chipset, onboard flash storage for cloud firmware and persistent configuration cache
• Regulatory RF Certifications: Global multi-domain SKU supporting FCC Part 15 (North America), ETSI EN 300328 / EN301893 (EMEA), TELEC Japan, KCC Korea regional RF emission compliance, EMI Class B household electronic equipment certification
• Maximum Concurrent Client Capacity: Up to 40 connected wireless clients; recommended maximum 20–25 simultaneous active business users for stable throughput and low-latency performance
• Warranty: Limited lifetime hardware warranty for original end-user purchasers

Key Specification Bullet Points

• Model: MR16-HW (Cisco Meraki Dual-Concurrent 2.4GHz/5GHz 802.11n Cloud-Managed Plenum-Rated Indoor Wireless Access Point)
• Wireless Standard: IEEE 802.11a/b/g/n dual-concurrent radio (2.4GHz + 5GHz), 2×2 MIMO two spatial streams per band
• Max Combined Aggregate PHY Throughput: Up to 600 Mbps (300 Mbps per radio band)
• Antennas: Non-detachable built-in omnidirectional internal antennas
• Wired Ports: 1 × Gigabit 10/100/1000 BASE-T PoE uplink port (IEEE 802.3af PoE PD supported), 1 × 10/100 Fast Ethernet secondary auxiliary wired device port
• Operation Modes: Cloud-managed CAPWAP AP mode, wireless mesh backhaul node mode, wired LAN extension peripheral port mode
• Core Exclusive Cloud-Managed Functions: Meraki cloud dashboard zero-touch provisioning; automatic cloud RF optimization with integrated full-band spectrum analyzer; self-healing multi-hop wireless mesh networking; Layer7 DPI application-aware QoS traffic shaping; multi-SSID 802.1Q VLAN segmentation; branded captive portal guest access with client isolation
• QoS: WMM TSPEC wireless multimedia VoIP/video traffic prioritization with application-layer bandwidth rate limiting
• Network Stack: Native IPv4 stack; static IP configurable on primary uplink port, DHCP-only IP assignment on secondary auxiliary port
• Security: WEP/WPA/WPA2 PSK/Enterprise 802.1X EAP authentication, MAC ACL, rogue AP detection & containment, hidden SSID suppression, wireless client isolation, Meraki Teleworker VPN, identity-based policy firewall
• Management: Meraki cloud dashboard web GUI, Meraki mobile monitoring app, SNMPv3 third-party monitoring integration, centralized cloud event logging and customizable fault alert notifications
• Power Options: IEEE 802.3af PoE input via primary uplink port or separate 12V DC local power adapter (sold separately, not included in standard packaging)
• Physical Mount: Desktop placement with anti-slip feet, vertical wall mounting, flush ceiling T-bar grid mounting with included universal mounting bracket and full hardware kit
• Environmental Restriction: Indoor use only, operating temperature range 0°C~40°C; UL2043 plenum-rated for ceiling plenum installation
• Typical Deployment Scenarios: Medium-density multi-room SME branch offices, K-12 school classrooms and lecture halls, multi-floor hospital patient wings, hotel guest floor wireless coverage, retail chain branch stores and large shopping mall concourses, mid-size business multi-zone wireless deployments
• Warranty: Limited lifetime hardware warranty for original end-user purchasers

Model Quick Reference

• MR16-HW: Base hardware SKU of Meraki MR16 dual-band 802.11n cloud-managed indoor plenum-rated AP
• Platform Differentiation vs MR12 Single-Band AP: MR12 is entry-level single-band 2.4GHz-only AP with one Gigabit PoE uplink + one Fast Ethernet auxiliary port; MR16 adds dual-concurrent 2.4GHz/5GHz operation, higher concurrent client capacity, UL2043 plenum-rated chassis and enhanced transmit/receive sensitivity for wider coverage
• Platform Distinction vs Standalone Small Business WAP Series APs (WAP121/WAP321/WAP581/WAP712): Meraki MR16 operates exclusively under Meraki cloud centralized management with zero-touch provisioning, automatic cloud RF optimization and native wireless mesh networking; Cisco Small Business WAP series are autonomous standalone APs without cloud controller dependency or Meraki’s exclusive automated RF and mesh cloud features
• Upgraded Alternatives: Meraki MR33 Wi-Fi 5 dual-band cloud-managed AP, Meraki MR44 Wi-Fi 6 dual-band enterprise AP for higher throughput, multi-band and ultra-high-density modern enterprise deployments