Cisco IW3702-x-K9 Full English Description

Listing Title

Full Commercial Product Description

1. IW3702-2E-x-K9: 4 N-type antenna ports split 2 top + 2 bottom for direct wall/pole-mounted external antennas
2. IW3702-4E-x-K9: All 4 N-type antenna ports aligned on a single side for centralized antenna cablingCisco

• Unified CAPWAP mode: Managed centrally by Catalyst 9800 wireless controllers for large industrial campus deployments
• Autonomous standalone mode: Independent operation via local CLI/web GUI without wireless controller
• Wireless Mesh mode: Build self-healing wireless backhaul networks where fiber cabling is unavailable (railway, remote mining zones)
• Workgroup Bridge (WGB): Connect legacy wired industrial PLCs, sensors and cameras to wireless infrastructureCisco

Four Concurrent Independent Radio Architecture

1. 2.4GHz Industrial Radio: 4×4 MIMO, 3 spatial streams, 20MHz fixed channel bandwidth; supports legacy 802.11b/g/n low-bandwidth industrial sensors, RFID readers and handheld scanners, max single-band throughput 300 Mbps.
2. 5GHz High-Speed Radio: 4×4 MIMO, 3 spatial streams, supports 20/40/80MHz wide channels with DFS radar frequency avoidance, 4096-QAM modulation; optimized for high-bandwidth industrial video surveillance, PLC real-time control and mobile vehicle backhaul, max single-band throughput 1 Gbps.
   Total aggregate dual-band PHY throughput reaches1.3 Gbps.
3. Dedicated Cisco CleanAir RF Spectrum Scanner: Runs 24/7 independent of client traffic radios, scans full 2.4/5GHz frequency bands to identify industrial RF interference, rogue APs and signal noise, provides real-time spectrum analytics and automatic channel adjustment to stabilize industrial wireless links.

Key Industrial Hardware Interfaces

1. 4 × N-type female external antenna ports: No integrated internal antennas; fully customizable with Cisco certified dual-band omnidirectional, directional, sector or high-gain patch external antennas for flexible coverage design in complex industrial terrain.
2. Dual M12 X-code shielded Gigabit Ethernet PoE ports:
   • PoE-IN: IEEE 802.3at PoE+ PD input for upstream switch power supply
   • PoE-OUT: IEEE 802.3af PoE PSE output to power external industrial IP devices (only active under DC power input)
3. M12 DC wide-range power input: 12V–48V DC industrial power supply alternative to PoE.
4. RJ45 RS232 sealed console port: Local CLI configuration, firmware recovery and troubleshooting with dust/water protective cover.
5. Multi-color status LED array: Visual indicators for boot status, controller association, radio operating state, fault alarms and temperature warnings.

Rugged Industrial Environmental Specifications

• Ingress Protection: IP67 fully dustproof and waterproof, withstands heavy rain, snow, mud and industrial dust
• Operating Temperature Range: -40°C to +70°C standard ambient; extended DC-powered range -50°C to +75°C (no solar load)
• Storage Temperature: -40°C to +85°C
• Humidity: 0%–100% non-condensing, resistant to industrial chemical vapor and salt mist
• Shock & Vibration: Certified EN61373 railway on-board shock/vibration standards, suitable for moving train, mining vehicle and mobile industrial equipment deployments
• Physical Dimensions: 287 × 203 × 59 mm (11.3 × 8.0 × 2.3 in)
• Weight: 3.0 kg (6.7 lb), corrosion-resistant aluminum alloy industrial chassis
• Mounting Compatibility: DIN rail brackets, wall mount, pole mount, ceiling mount, cabinet internal installation

Software & Security Features

1. Multiple Operation Modes: CAPWAP centralized controller managed mode, autonomous standalone mode, wireless mesh backhaul mode, Workgroup Bridge (WGB) wired industrial device connection mode.
2. Industrial Traffic Prioritization: QoS marking and priority queue scheduling for PROFINET real-time industrial control frames, ensures low-latency transmission for critical automation signals.
3. DLEP Radio Aware Routing: Supports intelligent upstream path switching for mobile rail/vehicle wireless communications, seamless fast roaming for moving industrial assets.
4. Wireless Security Suite: WPA3-Enterprise, WPA2/WPA wireless encryption with AES hardware acceleration; IEEE 802.1X AAA authentication, EAP-TLS/PEAP/Fast authentication suites; isolated VLAN segmentation to separate industrial control network, staff guest network and IoT sensor network; rogue AP detection and containment via CleanAir Air Marshal WIDS/WIPS function.
5. Management Interfaces: Cisco IOS command-line interface (CLI), embedded web-based GUI, Telnet/SSH remote management, SNMP industrial network monitoring.

Power Supply Compatibility

• Full-performance operation: IEEE 802.3at PoE+ (30W class 4) via M12 PoE-IN port, or 12–48V DC wide-range industrial power adapter connected to M12 DC input.
• PoE-out port restriction: PoE-out (802.3af, max 15.4W output) only functional when powered by DC input; PoE-out disabled if AP receives power via PoE-in.
• Typical maximum power consumption: 18.5 W under full dual-radio operation with PoE-out enabled.

Key Specification Bullet Points

• Model: IW3702-x-K9 (Cisco Industrial Wireless Rugged IP67 Dual-Band 802.11ac Wave1 Industrial/Outdoor Wi-Fi Access Point, x = regional regulatory domain code)
• Wi-Fi Standard: IEEE 802.11a/b/g/n/ac Wave1 dual concurrent radio, backward compatible with 802.11b/g legacy IoT devices
• Radio Architecture: Dual independent 4×4 MIMO client radios + dedicated 24/7 CleanAir spectrum scanning radio
• Spatial Streams: 3 spatial streams per radio; total aggregate dual-band PHY throughput up to 1.3 Gbps
• Antenna Interface: 4 × N-type female external antenna ports, no built-in internal antennas, supports customizable high-gain directional/omnidirectional/sector external antennas
• Exclusive Industrial Hardware Features: IP67 sealed metal chassis, wide extreme temperature operation (-40°C ~ +70°C), EN61373 rail shock/vibration certified, DIN rail mount compatible, dual shielded M12 industrial PoE Ethernet ports with PoE-out for industrial peripheral power supply, M12 wide-range DC power input
• Core Industrial Software Capabilities: CAPWAP centralized controller management, autonomous standalone, wireless mesh backhaul, Workgroup Bridge (WGB), PROFINET industrial traffic QoS priority, DLEP Radio Aware RAR for mobile rail/vehicle communications, Cisco CleanAir RF interference suppression, Air Marshal WIDS/WIPS rogue wireless device containment
• Supported Operation Modes: Unified CAPWAP controller managed mode, autonomous standalone mode, wireless mesh backhaul mode, industrial Workgroup Bridge (WGB) mode
• Wired Interfaces:
  2 × M12 X-code shielded Gigabit PoE Ethernet ports (PoE-IN 802.3at PD / PoE-OUT 802.3af PSE)
  1 × M12 wide-range DC power input port
  1 × sealed RJ45 RS232 local console port
  Multi-color status LED indicator array, physical reset button
• Power Compatibility: IEEE 802.3at PoE+ input, 12–48V wide-range DC industrial power supply; PoE-out peripheral power only active under DC power input
• Environmental Parameters: IP67 dustproof & waterproof rating; standard operating temperature -40°C ~ +70°C, extended DC-powered range -50°C ~ +75°C; storage temperature -40°C ~ +85°C; humidity 0%–100% non-condensing; EN61373 railway shock/vibration certified
• Physical Specs: Dimension 287 × 203 × 59 mm; weight 3.0 kg; corrosion-resistant aluminum alloy industrial chassis
• Mounting Options: DIN rail brackets, wall mount kits, pole mounting arms, ceiling mount, internal industrial cabinet installation
• Security Suite: WPA3/WPA2 AES hardware encryption, IEEE 802.1X AAA enterprise authentication, complete EAP authentication suites, isolated user VLAN segmentation, 24/7 Air Marshal WIDS/WIPS rogue AP detection & containment
• Management Support: Cisco IOS CLI, embedded web GUI, SSH/Telnet remote access, SNMP industrial network monitoring
• Typical Deployment Scenarios: Railway train on-board wireless systems, rail trackside communications, underground mining sites, heavy manufacturing industrial factories, intelligent highway transportation roadside deployments, smart city streetlight pole wireless coverage, outdoor logistics and container yards, industrial control cabinet DIN-rail installation, mobile industrial vehicle wireless communications

Model Quick Reference

• IW3702-2E-x-K9: 4 N-type antenna ports split 2 top + 2 bottom layout for direct pole/wall mounted external antennas
• IW3702-4E-x-K9: All 4 N-type antenna ports aligned on a single side for centralized antenna cabling
• IW3702-xx-UXK9: Global universal unregulated SKU variant without region-locked RF domain restrictions
• Suffix x: Regulatory domain code (A/B/D/E/F/L/M/N/Q/R/S/Z) for country-specific RF emission compliance
• Distinction from commercial indoor APs: IP67 industrial waterproof/dustproof chassis, extreme wide temperature tolerance, M12 shielded industrial Ethernet connectors, rail shock/vibration certification, PROFINET industrial protocol priority, PoE-out industrial peripheral power output, DIN rail cabinet mounting support