Cisco Catalyst CW9177E Full English Description

Listing Title

Full Commercial Product Description

1. On‑premises CAPWAP lightweight mode managed by Catalyst 9800 Series physical/virtual Wireless LAN Controllers and Cisco DNA Center automation & assurance stack
2. Meraki cloud‑native zero‑touch provisioning mode via Meraki Dashboard for multi‑site centralized cloud monitoring, policy orchestration and remote maintenanceCisco.

• Full tri‑band mode: Concurrent 2.4GHz + 5GHz + clean interference‑free LPI 6GHz Wi‑Fi 7 spectrum to maximize multi‑band concurrent client capacity
• High‑density dual 5GHz mode: Disable 6GHz band to activate two parallel 4×4 5GHz radios, doubling 5GHz user capacity for regions without regulatory approval for 6GHz spectrum operationCisco.

Four Concurrent Independent Radio Architecture

1. Fixed 2.4 GHz Wi‑Fi 7 Client Serving Radio: 4×4:4 MU‑MIMO with four spatial streams, supports only 20MHz channel bandwidth, fully backward compatible with legacy 802.11b/g/n IoT and mobile devices; maximum single‑band PHY throughput 1.5 Gbps.
2. Primary 5 GHz Wi‑Fi 7 Client Serving Radio: 4×4:4 MU‑MIMO, supports 20/40/80/160MHz wide channels, DFS radar frequency avoidance, 4096‑QAM high‑efficiency modulation; peak single‑band PHY throughput 4.8 Gbps.
3. XOR‑Switchable Secondary Radio (Dual 5GHz or LPI 6GHz Wi‑Fi 7): Two flexible deployment modes enabled by Flexible Radio Assignment:
   • Mode 1 (Full Tri‑Band): Activate exclusive clean LPI 6GHz unlicensed band, supports 20/40/80/160/320MHz ultra‑wide channels; max single‑band PHY throughput 4.8 Gbps.
   • Mode 2 (High‑Density Dual 5GHz): Disable 6GHz spectrum, merge secondary radio into a second independent 4×4 5GHz radio to double 5GHz client capacity.
     Total aggregate tri‑band Wi‑Fi 7 PHY throughput reaches18 GbpsCisco.
4. Dedicated AI/ML CleanAir Pro Tri‑Band Scanning Radio: Runs 24×7 independently of client serving radios, continuously scans full 2.4/5/6GHz spectrum to decode EHT Wi‑Fi 7 frames, detect RF interference, rogue access points and malicious wireless intrusions, delivering automatic Air Marshal WIDS/WIPS rogue containment and real‑time RF spectrum analytics without occupying user traffic radio resources.
5. Embedded Multi‑Function IoT Radio Subsystem: Separate RF chain with integrated modules:
   • BLE 6.0 beacon & scanning radio for location analytics, visitor counting and asset tracking
   • Built‑in GNSS/GPS receiver with external GNSS antenna extension port for enhanced geolocation signal reception and AP coordinate calibration
   • Accelerometer support (works with Cisco smart external antennas) for installation angle validation post‑mountingCisco.

• Multi‑Link Operation (MLO): Ultra‑low‑latency parallel multi‑band transmission for real‑time AR/VR, high‑definition video streaming and industrial wireless automation workloads
• Uplink & Downlink OFDMA: Splits wireless spectrum into miniature resource units to drastically reduce multi‑client transmission latency
• 4096‑QAM high‑density modulation for maximum single‑channel throughput
• Downlink MU‑MIMO: Simultaneous parallel data transmission to multiple Wi‑Fi 7 compatible clients to maximize airtime capacity
• BSS Coloring Spatial Reuse: Mitigates co‑channel interference between adjacent APs in dense linear outdoor layouts
• Target Wake Time (TWT): Extends battery service life of smartphones, tablets and battery‑powered IoT sensors via scheduled sleep cycles
• Transmit Beamforming & MRC Maximal Ratio Combining: Extends directional outdoor RF coverage range and strengthens weak‑client connection stability
• Full LPI‑compliant 6GHz indoor operation, 320MHz ultra‑wide channel support, A‑MPDU/A‑MSDU packet aggregation, Cyclic Shift Diversity (CSD) and complete DFS radar avoidance support
• Cisco Ultra‑Reliable Wireless Backhaul (URWB): Near‑zero latency (<10ms), zero packet loss with seamless client handoff for wireless network extensionCisco.

External Antenna Connector Design (CW9177E Exclusive Feature)

• Compatible with Cisco certified tri‑band external antennas: omnidirectional pole mount antennas, directional patch antennas, high‑gain sector antennas, long‑range Yagi antennas for specialized coverage scenariosCisco Mera....
• Network designers freely select antenna gain, beam width and polarization to adapt to ports, container yards, highway corridors, industrial perimeters and stadium perimeter zones where fixed internal antenna beam patterns cannot meet coverage requirements.
• All RF ports are IP67 sealed when antenna cables are connected to maintain full dust/waterproof enclosure rating.

Dual Uplink Wired Interfaces & Power Specifications

Wired Interfaces (CW9177E Exclusive Dual Uplink Design)

1. 1 × 100M/1000M/2500M/5000M/10GBASE‑T Multigigabit (mGig) RJ45 PoE‑In uplink port, IEEE 802.3bz NBASE‑T compliant, supports Cat5e/Cat6 cabling for 10Gbps high‑speed copper uplink transmission, receives PoE power input from upstream PoE switch/injector
2. 1 × Dual‑Rate SFP/SFP+ Fiber Port: Auto‑detects 1G or 10G fiber transceivers for long‑distance fiber backhaul to core network switches, ideal for geographically dispersed outdoor campus and smart city deployments
3. RJ45 RS‑232 local console port for manual initial configuration, firmware recovery and field troubleshooting
4. USB 2.0 Type‑A auxiliary port with 4.5W power output, compatible with third‑party IoT peripherals and local diagnostic logging; USB functionality only active under full 802.3bt PoE++ power supply
5. External GNSS/GPS antenna extension port for enhanced geolocation signal reception in shielded outdoor mounting locations
6. Single multi‑color LED status indicator for boot sequence, WLC/cloud dashboard connectivity, runtime operation and hardware fault alerts
7. Physical reset button for one‑touch factory default configuration recovery
8. Kensington lock slot for physical anti‑theft protection.

Power Supply Compatibility

• Full‑performance operation: IEEE 802.3bt PoE++ (Class 6, 60W maximum power budget), required to activate all four concurrent radios, full 10G multigigabit copper uplink, 10G fiber SFP/SFP+ port, USB port and integrated GNSS/BLE IoT subsystem functionality; typical peak power consumption 48W
• Degraded limited operation via IEEE 802.3at PoE+: All serving Wi‑Fi radios downgrade to 1×1 MIMO streams, multigigabit Ethernet port automatically drops to 1Gbps, SFP fiber port disabled, USB port, GNSS and BLE modules fully disabled to reduce thermal load
• Supported power sources: 802.3at/bt UPOE PoE switches, dedicated 802.3bt PoE injectors, external 54V DC power adaptersCisco.

Supported Deployment Operation Modes

1. CAPWAP Lightweight On‑Prem Controller Mode (Factory Default Firmware): Unified global wireless policy management via Catalyst 9800 Series physical/virtual WLCs, automated RF group resource tuning, seamless inter‑AP client roaming, centralized layered security enforcement and full Cisco DNA Center analytics integration. Supports SD‑Access fabric architecture and Cisco ISE identity services engine integration.
2. Meraki Cloud‑Managed Mode (Firmware Reflash Required): Zero‑touch cloud provisioning; once powered on, the AP automatically connects to Meraki cloud servers, downloads pre‑assigned network configurations and joins the managed site. Administrators deploy global wireless policies, run automated RF optimization, schedule seamless background firmware upgrades and monitor all APs via centralized Meraki Dashboard.
3. Auxiliary diagnostic modes: Monitor Mode, Sniffer Mode for full tri‑band RF spectrum capture and wireless traffic packet inspection.

Enterprise‑Grade Layered Wireless Security Suite

• WPA3‑Enterprise 192‑bit / WPA3‑Personal / WPA2 / WPA wireless encryption suites with AES hardware acceleration
• Secure Boot, runtime integrity defense and digital firmware signing to prevent malicious firmware tampering, supported by Cisco Trust Anchor module for supply chain security
• Full IEEE 802.1X AAA authentication, native Active Directory integration and complete EAP protocol stack (EAP‑TLS, PEAP, EAP‑FAST, EAP‑TTLS, LEAP)
• Air Marshal WIDS/WIPS: 24/7 dedicated scanning radio detects, classifies and contains rogue wireless devices with full threat audit logs
• Layer 7 application‑aware traffic shaping: Classifies hundreds of business/streaming/gaming applications to prioritize productivity traffic and restrict non‑work bandwidth consumption
• Cisco Umbrella native DNS‑layer cloud security for automated malicious domain blocking (Meraki cloud management mode)
• Isolated VLAN segmentation to separate corporate employee, guest and IoT device wireless networks
• Hardware‑accelerated DTLS encrypted control tunnels between AP and Catalyst WLC / Meraki cloud data centers.

Physical & Environmental Specifications

• Dimensions (without mounting bracket): 352.2 mm × 270 mm × 76.2 mm (13.8 × 10.6 × 3 in.)
• Weight: 4.11 kg (9.06 lb), rugged corrosion‑resistant industrial metal outdoor chassis
• Ingress Protection Rating: IP67 dustproof and waterproof, fully sealed for outdoor rain, snow and dust exposure
• Operating temperature range: -40°C ~ 65°C (-40°F ~ 149°F), wide‑range tolerance for extreme hot and cold outdoor climates
• Storage temperature range: -40°C ~ 70°C (-40°F ~ 158°F)
• Operating humidity: 5% – 95% non‑condensing
• Operating altitude: Up to 4205 meters (13.8K ft) at 45°C ambient temperature
• Mounting compatibility: Universal outdoor pole mounting brackets, wall mounting kits and articulating mounting arms
• System memory: 4GB DRAM, 2GB Flash storage
• Regulatory certification: Global single‑SKU design compliant with FCC (North America), CE (EU), KC (Korea), MIC (Japan) and other regional RF regulatory standards
• Warranty: Standard Cisco limited hardware warranty.

Cisco DNA & Meraki Cloud Ecosystem Compatibility

1. Cisco DNA Center (Catalyst On‑Prem Mode): Supports DNA Assurance AI/ML predictive wireless analytics, Intelligent Capture deep wireless traffic inspection, end‑user client performance monitoring, automated fault troubleshooting and predictive wireless network capacity planning, native integration with Cisco ISE identity services engine, SD‑Access fabric networks and Cisco Spaces outdoor location & IoT beacon analytics.
2. Meraki Cloud Dashboard (Cloud‑Managed Mode): Supports Meraki Health AI anomaly detection, real‑time visitor density mapping, dwell time tracking, repeat visitor reporting via cloud API, native integration with Meraki Vision smart IP cameras and Meraki MX SD‑WAN security appliances for unified full‑stack network visibility.

Key Specification Bullet Points

• Model: CW9177E (Catalyst 9177E Global Single‑SKU Hardened Outdoor Tri‑Band Wi‑Fi 7 Access Point, IP67 Rated, External Tri‑Band Antenna Connector Ports, Dual 10G Copper/Fiber Uplinks, Integrated GNSS/BLE 6.0 IoT Subsystem + Accelerometer Support)
• Wi‑Fi Standard: IEEE 802.11be Wi‑Fi 7, backward compatible with Wi‑Fi 6E / Wi‑Fi 6 / 802.11a/b/g/n/ac
• Radio Architecture: Four concurrent independent radios
  1. Fixed 2.4GHz serving radio: 4×4 MU‑MIMO
  2. Fixed primary 5GHz serving radio: 4×4 MU‑MIMO
  3. XOR switchable secondary radio: Dual 5GHz high‑density mode OR dedicated LPI 6GHz tri‑band Wi‑Fi 7 mode (4×4 MU‑MIMO)
  4. Dedicated full‑time tri‑band AI/ML CleanAir Pro Air Marshal WIDS/WIPS scanning radio
  5. Embedded multi‑function IoT radio (BLE 6.0 beacon scanner + GNSS/GPS geolocation + accelerometer support for smart external antennas)
• Spatial Streams: 4 spatial streams for all three client Wi‑Fi radios; Max total aggregate tri‑band PHY throughput 18 Gbps
• Antenna Design: External tri‑band RF connector ports, no built‑in internal antennas; supports Cisco certified omnidirectional, directional, sector and high‑gain patch external antennas
• Exclusive Hardware Features: IP67 industrial all‑weather sealed chassis, external antenna ports for fully customizable RF coverage, dual uplink ports (1×10G mGig RJ45 PoE++ + 1×1G/10G SFP/SFP+ fiber port), built‑in GNSS/GPS receiver, BLE 6.0 IoT beacon radio, accelerometer compatibility with smart external antennas, Cisco URWB wireless backhaul capability, wide extreme temperature operating range
• Core Wi‑Fi 7 Exclusive Features: Multi‑Link Operation (MLO), 4096‑QAM modulation, 320MHz wide 6GHz channel support, AI/ML‑driven CleanAir Pro full‑spectrum scanning, Flexible Radio Assignment (FRA) dual‑band/tri‑band switchable radio modes, Ultra‑Reliable Wireless Backhaul
• Supported Operation Modes: CAPWAP Catalyst 9800 on‑prem controller mode (factory default), migratable Meraki cloud‑managed Dashboard mode, Monitor / Sniffer RF diagnostic modes
• Wired Interfaces:
  1 × 10G Multigigabit PoE‑In RJ45 copper uplink port
  1 × Dual‑rate 1G/10G SFP/SFP+ fiber uplink port
  1 × RJ45 RS‑232 local console port
  1 × USB 2.0 auxiliary IoT/peripheral port
  1 × External GNSS antenna extension jack
  Multi‑color single status LED, physical reset button, Kensington anti‑theft lock slot
• Power Compatibility: IEEE 802.3bt PoE++ (full 4‑radio + GNSS/BLE + fiber port performance); IEEE 802.3at PoE+ (limited radio/port functionality, IoT modules and SFP port disabled); compatible with UPOE switches, dedicated 802.3bt PoE injectors and 54V DC power adapters
• Environmental Parameters: IP67 dust/waterproof rating; operating temp -40°C ~ 65°C; storage temp -40°C ~ 70°C; humidity 5%–95% non‑condensing
• Physical Specs: Dimension 352.2 × 270 × 76.2 mm; weight 4.11 kg
• Mounting: Outdoor pole mounting brackets, wall mount kits and articulating arms, universal Cisco outdoor AP mounting accessories compatible
• Security Suite: WPA3/WPA2/AES hardware encryption, Secure Boot + Cisco Trust Anchor firmware anti‑tampering, 24/7 Air Marshal WIDS/WIPS rogue AP containment, Cisco Umbrella DNS cloud security (Meraki), Layer7 application traffic shaping, full 802.1X multi‑EAP authentication, isolated VLAN segmentation for wired/wireless users, DTLS encrypted CAPWAP/cloud control tunnels
• Ecosystem Support: Dual‑stack Cisco DNA Center on‑prem management + Meraki cloud dashboard, DNA Assurance / Meraki Health AI network analytics, Intelligent Capture wireless traffic inspection, containerized edge IoT application hosting, Cisco Spaces outdoor location & IoT beacon analytics, ISE identity integration, Meraki MX SD‑WAN / Meraki Vision camera unified stack integration
• Typical Deployment Scenarios: Port terminals, container storage yards, long highway and railway linear corridors, industrial factory perimeter coverage, stadium outer perimeter zones, smart city roadside pole deployments, open‑air logistics lots, custom RF design projects requiring tailored antenna beam patterns, mass outdoor IoT sensor and asset tracking networks, hybrid on‑prem Catalyst WLC or Meraki zero‑touch cloud managed high‑performance customizable outdoor Wi‑Fi 7 AP deployments

Model Quick Reference

• CW9177E: Global single‑SKU IP67 hardened outdoor flagship tri‑band Wi‑Fi 7 enterprise AP with external tri‑band antenna connector ports (no built‑in internal antennas), four concurrent radios (3×4×4 tri‑band client radios + dedicated CleanAir Pro scanning radio + integrated GNSS/BLE 6.0 multi‑IoT radio with accelerometer support), exclusive dual 10G copper/fiber uplink ports, dual unified Catalyst 9800 on‑prem CAPWAP or Meraki cloud dashboard management, industrial all‑weather sealed chassis for port yards, highway corridors, industrial perimeters and custom RF design outdoor deployments requiring fully customizable external antenna coverage
• CW9177I: Omnidirectional integrated internal antenna outdoor variant for broad uniform open‑area coverage such as campus plazas and open parking lots
• CW9177D: Directional integrated internal antenna outdoor variant for targeted long‑range narrow‑beam RF coverage along roadways, rail lines and warehouse aisles
• CW9176D1 / CW9176I: Indoor flagship Wi‑Fi 7 AP without IP67 outdoor enclosure, external antenna ports and SFP fiber uplink ports
• Catalyst 916x Series: Previous generation indoor Wi‑Fi 6E APs without Wi‑Fi 7 MLO / 4K‑QAM capabilities and no outdoor IP‑rated chassis or fiber SFP uplink ports