Cisco Catalyst CW9177I Full English Description

Listing Title

Full Commercial Product Description

1. On-premises CAPWAP lightweight mode managed by Catalyst 9800 Series physical/virtual Wireless LAN Controllers and Cisco DNA Center automation & assurance stack
2. Meraki cloud-native zero-touch provisioning mode via Meraki Dashboard for multi-site centralized cloud monitoring and policy deploymentCisco.

• Full tri-band mode: Concurrent 2.4GHz + 5GHz + clean interference-free LPI 6GHz Wi‑Fi 7 spectrum for maximum multi-band client capacity
• Dual high-density 5GHz mode: Disable 6GHz band to activate two parallel 4×4 5GHz radios, doubling 5GHz user capacity for regions without regulatory approval for 6GHz spectrum operationCisco.

Four Concurrent Independent Radio Architecture

1. Fixed 2.4 GHz Wi‑Fi 7 Client Serving Radio: 4×4:4 MU‑MIMO with four spatial streams, supports only 20MHz channel bandwidth, fully backward compatible with legacy 802.11b/g/n IoT and mobile devices; maximum single-band PHY throughput 1.5 Gbps.
2. Primary 5 GHz Wi‑Fi 7 Client Serving Radio: 4×4:4 MU‑MIMO, supports 20/40/80/160MHz wide channels, DFS radar frequency avoidance, 4096-QAM high-efficiency modulation; peak single-band PHY throughput 4.8 Gbps.
3. XOR-Switchable Secondary Radio (Dual 5GHz or LPI 6GHz Wi‑Fi 7): Two flexible deployment modes enabled by Flexible Radio Assignment:
   • Mode 1 (Full Tri-Band): Activate exclusive clean LPI 6GHz unlicensed band, supports 20/40/80/320MHz ultra-wide channels; max single-band PHY throughput 4.8 Gbps.
   • Mode 2 (High-Density Dual 5GHz): Disable 6GHz spectrum, merge secondary radio into a second independent 4×4 5GHz radio to double 5GHz client capacity.
     Total aggregate tri-band Wi‑Fi 7 PHY throughput reaches18 Gbps.
4. Dedicated AI/ML CleanAir Pro Tri-Band Scanning Radio: Runs 24×7 independently of client serving radios, continuously scans full 2.4/5/6GHz spectrum to decode EHT Wi‑Fi 7 frames, detect RF interference, rogue access points and malicious wireless intrusions, delivering automatic Air Marshal WIDS/WIPS rogue containment and real-time RF spectrum analytics without occupying user traffic radio resources.
5. Embedded Multi-Function IoT Radio Subsystem: Separate built-in omnidirectional internal antenna with dual embedded modules:
   • BLE beacon & scanning radio for location analytics, visitor counting and asset tracking
   • Built-in GNSS/GPS receiver with external GNSS antenna extension port for enhanced geolocation signal reception and AP coordinate calibration

• Multi-Link Operation (MLO): Ultra-low-latency parallel multi-band transmission for real-time AR/VR, video conferencing and cloud desktop workloads
• Uplink & Downlink OFDMA: Splits wireless spectrum into miniature resource units to drastically reduce multi-client transmission latency
• 4096-QAM high-density modulation for maximum single-channel throughput
• Downlink MU‑MIMO: Simultaneous parallel data transmission to multiple Wi‑Fi 7 compatible clients to maximize airtime capacity
• BSS Coloring Spatial Reuse: Mitigates co-channel interference between adjacent APs in dense campus and stadium layouts
• Target Wake Time (TWT): Extends battery service life of smartphones, tablets and battery-powered IoT sensors via scheduled sleep cycles
• Transmit Beamforming & MRC Maximal Ratio Combining: Extends omnidirectional outdoor RF coverage range and strengthens weak-client connection stability
• Full LPI-compliant 6GHz indoor operation, 320MHz ultra-wide channel support, A-MPDU/A-MSDU packet aggregation, Cyclic Shift Diversity (CSD) and complete DFS radar avoidance support

Integrated Omnidirectional Internal Tri-Band Antenna Array (CW9177I Exclusive Feature)

• 2.4GHz omnidirectional antenna gain: 4 dBi, uniform full 360° horizontal azimuth omnidirectional coverage
• 5GHz omnidirectional antenna gain: 5 dBi wide-area outdoor coverage
• 6GHz Wi‑Fi 7 omnidirectional antenna gain: 6 dBi optimized for clean low-interference 6GHz band high-throughput wide-range transmission
• Separate dedicated omnidirectional internal antenna for BLE/GNSS multi-function IoT radio

Dual Uplink Wired Interfaces & Power Specifications

Wired Interfaces (CW9177I Exclusive Dual Uplink Design)

1. 1 × 100M/1000M/2500M/5000M/10GBASE-T Multigigabit (mGig) RJ45 PoE-In uplink port, IEEE 802.3bz NBASE-T compliant, supports Cat5e/Cat6 cabling for 10Gbps high-speed copper uplink transmission, receives PoE power input from upstream PoE switch/injector
2. 1 × Dual-Rate SFP/SFP+ Fiber Port: Auto-detects 1G or 10G fiber transceivers for long-distance fiber backhaul to core network switches, ideal for geographically dispersed outdoor campus and smart city deployments
3. RJ45 RS‑232 local console port for manual initial configuration, firmware recovery and field troubleshooting
4. USB 2.0 Type-A auxiliary port with 9W power output, compatible with third-party IoT peripherals and local diagnostic logging; USB functionality only active under full 802.3bt PoE++ power supply
5. External GNSS/GPS antenna extension port for enhanced geolocation signal reception in shielded outdoor mounting locations
6. Single multi-color LED status indicator for boot sequence, WLC/cloud dashboard connectivity, runtime operation and hardware fault alerts
7. Physical reset button for one-touch factory default configuration recovery
8. Kensington lock slot for physical anti-theft protection

Power Supply Compatibility

• Full-performance operation: IEEE 802.3bt PoE++ (Class 6, 60W maximum power budget), required to activate all four concurrent radios, full 10G multigigabit copper uplink, 10G fiber SFP/SFP+ port, USB port and integrated GNSS/BLE IoT subsystem functionality; typical peak power consumption 52W
• Degraded limited operation via IEEE 802.3at PoE+: All serving Wi-Fi radios downgrade to 1×1 MIMO streams, multigigabit Ethernet port automatically drops to 1Gbps, SFP fiber port disabled, USB port, GNSS and BLE modules fully disabled to reduce thermal load
• Supported power sources: 802.3at/bt UPOE PoE switches, dedicated 802.3bt PoE injectors, external 54V DC power adapters

Supported Deployment Operation Modes

1. CAPWAP Lightweight On-Prem Controller Mode (Factory Default Firmware): Unified global wireless policy management via Catalyst 9800 Series physical/virtual WLCs, automated RF group resource tuning, seamless inter-AP client roaming, centralized layered security enforcement and full Cisco DNA Center analytics integration. Supports SD-Access fabric architecture and Cisco ISE identity services engine integration.
2. Meraki Cloud-Managed Mode (Firmware Reflash Required): Zero-touch cloud provisioning; once powered on, the AP automatically connects to Meraki cloud servers, downloads pre-assigned network configurations and joins the managed site. Administrators deploy global wireless policies, run automated RF optimization, schedule seamless background firmware upgrades and monitor all APs via centralized Meraki Dashboard.
3. Auxiliary diagnostic modes: Monitor Mode, Sniffer Mode for full tri-band RF spectrum capture and wireless traffic packet inspection

Enterprise-Grade Layered Wireless Security Suite

• WPA3-Enterprise 192-bit / WPA3-Personal / WPA2 / WPA wireless encryption suites with AES hardware acceleration
• Secure Boot, runtime integrity defense and digital firmware signing to prevent malicious firmware tampering, supported by Cisco Trust Anchor module for supply chain security
• Full IEEE 802.1X AAA authentication, native Active Directory integration and complete EAP protocol stack (EAP-TLS, PEAP, EAP-FAST, EAP-TTLS, LEAP)
• Air Marshal WIDS/WIPS: 24/7 dedicated scanning radio detects, classifies and contains rogue wireless devices with full threat audit logs
• Layer 7 application-aware traffic shaping: Classifies hundreds of business/streaming/gaming applications to prioritize productivity traffic and restrict non-work bandwidth consumption
• Cisco Umbrella native DNS-layer cloud security for automated malicious domain blocking (Meraki cloud management mode)
• Isolated VLAN segmentation to separate corporate employee, guest and IoT device wireless networks
• Hardware-accelerated DTLS encrypted control tunnels between AP and Catalyst WLC / Meraki cloud data centers

Physical & Environmental Specifications

• Dimensions (without mounting bracket): Outdoor sealed rectangular chassis optimized for pole/wall mounting
• Weight: Rugged metal outdoor housing, industrial-grade corrosion-resistant alloy
• Ingress Protection Rating: IP67 dustproof and waterproof, fully sealed for outdoor rain, snow and dust exposure
• Operating temperature range: -40°C ~ 65°C (-40°F ~ 149°F), wide-range tolerance for extreme hot and cold outdoor climates
• Storage temperature range: -40°C ~ 70°C (-40°F ~ 158°F)
• Operating humidity: 5% – 95% non-condensing
• Operating altitude: Up to 4205 meters (13.8K ft) at 45°C ambient temperature
• Mounting compatibility: Universal outdoor pole mounting brackets, wall mounting kits and articulating mounting arms
• System memory: 4GB DRAM, 2GB Flash storage
• Regulatory certification: Global single-SKU design compliant with FCC (North America), CE (EU), KC (Korea), MIC (Japan) and other regional RF regulatory standards
• Warranty: Limited lifetime hardware warranty (WARR-CW-LIFE-LTD)

Cisco DNA & Meraki Cloud Ecosystem Compatibility

1. Cisco DNA Center (Catalyst On-Prem Mode): Supports DNA Assurance AI/ML predictive wireless analytics, Intelligent Capture deep wireless traffic inspection, end-user client performance monitoring, automated fault troubleshooting and predictive wireless network capacity planning, native integration with Cisco ISE identity services engine, SD-Access fabric networks and Cisco Spaces outdoor location & IoT beacon analytics.
2. Meraki Cloud Dashboard (Cloud-Managed Mode): Supports Meraki Health AI anomaly detection, real-time visitor density mapping, dwell time tracking, repeat visitor reporting via cloud API, native integration with Meraki Vision smart IP cameras and Meraki MX SD-WAN security appliances for unified full-stack network visibility

Key Specification Bullet Points

• Model: CW9177I (Catalyst 9177I Global Single-SKU Outdoor Tri-Band Wi‑Fi 7 Access Point, IP67 Rated, Built-In Omnidirectional Integrated Antennas, Dual 10G Copper/Fiber Uplinks, Integrated GNSS/BLE IoT Subsystem)
• Wi‑Fi Standard: IEEE 802.11be Wi‑Fi 7, backward compatible with Wi‑Fi 6E / Wi‑Fi 6 / 802.11a/b/g/n/ac
• Radio Architecture: Four concurrent independent radios
  1. Fixed 2.4GHz serving radio: 4×4 MU-MIMO
  2. Fixed primary 5GHz serving radio: 4×4 MU-MIMO
  3. XOR switchable secondary radio: Dual 5GHz high-density mode OR dedicated LPI 6GHz tri-band Wi‑Fi 7 mode (4×4 MU-MIMO)
  4. Dedicated full-time tri-band AI/ML CleanAir Pro Air Marshal WIDS/WIPS scanning radio
  5. Embedded multi-function IoT radio (BLE beacon scanner + GNSS/GPS geolocation, separate internal omnidirectional antenna)
• Spatial Streams: 4 spatial streams for all three client Wi-Fi radios; Max total aggregate tri-band PHY throughput 18 Gbps
• Antenna Design: Factory integrated omnidirectional tri-band internal antenna array; gain: 4 dBi (2.4GHz), 5 dBi (5GHz), 6 dBi (6GHz); no external RF antenna ports
• Exclusive Hardware Features: IP67 outdoor sealed industrial enclosure, dual uplink ports (1×10G mGig RJ45 PoE++ + 1×1G/10G SFP/SFP+ fiber port), built-in GNSS/GPS receiver, BLE IoT beacon radio, wide extreme temperature operating range
• Core Wi‑Fi 7 Exclusive Features: Multi-Link Operation (MLO), 4096-QAM modulation, 320MHz wide 6GHz channel support, AI/ML-driven CleanAir Pro full-spectrum scanning, Flexible Radio Assignment (FRA) dual-band/tri-band switchable radio modes
• Supported Operation Modes: CAPWAP Catalyst 9800 on-prem controller mode (factory default), migratable Meraki cloud-managed Dashboard mode, Monitor / Sniffer RF diagnostic modes
• Wired Interfaces:
  1 × 10G Multigigabit PoE-In RJ45 copper uplink port
  1 × Dual-rate 1G/10G SFP/SFP+ fiber uplink port
  1 × RJ45 RS‑232 local console port
  1 × USB 2.0 auxiliary IoT/peripheral port
  1 × External GNSS antenna extension jack
  Multi-color single status LED, physical reset button, Kensington anti-theft lock slot
• Power Compatibility: IEEE 802.3bt PoE++ (full 4-radio + GNSS/BLE + fiber port performance); IEEE 802.3at PoE+ (limited radio/port functionality, IoT modules and SFP port disabled); compatible with UPOE switches, dedicated 802.3bt PoE injectors and 54V DC power adapters
• Environmental Parameters: IP67 dust/waterproof rating; operating temp -40°C ~ 65°C; storage temp -40°C ~ 70°C; humidity 5%–95% non-condensing
• Physical Specs: Industrial IP67 sealed outdoor metal chassis, corrosion-resistant alloy construction, pole/wall mounting compatible
• Mounting: Outdoor pole mounting brackets, wall mount kits and articulating arms, universal Cisco outdoor AP mounting accessories compatible
• Security Suite: WPA3/WPA2/AES hardware encryption, Secure Boot + Cisco Trust Anchor firmware anti-tampering, 24/7 Air Marshal WIDS/WIPS rogue AP containment, Cisco Umbrella DNS cloud security (Meraki), Layer7 application traffic shaping, full 802.1X multi-EAP authentication, isolated VLAN segmentation for wired/wireless users, DTLS encrypted CAPWAP/cloud control tunnels
• Ecosystem Support: Dual-stack Cisco DNA Center on-prem management + Meraki cloud dashboard, DNA Assurance / Meraki Health AI network analytics, Intelligent Capture wireless traffic inspection, containerized edge IoT application hosting, Cisco Spaces outdoor location & IoT beacon analytics, ISE identity integration, Meraki MX SD-WAN / Meraki Vision camera unified stack integration
• Typical Deployment Scenarios: Outdoor university campus open plazas, large stadium spectator areas, industrial park open yards, logistics warehouse exterior lots, public transit bus/train hubs, smart city streetlight pole deployments, outdoor retail shopping plazas, open-air event venues, mass outdoor IoT sensor and asset tracking networks, hybrid on-prem Catalyst WLC or Meraki zero-touch cloud managed high-performance omnidirectional outdoor Wi‑Fi 7 AP deployments requiring wide uniform open-air coverage, long-distance fiber backhaul and rugged all-weather outdoor operation

Model Quick Reference

• CW9177I: Global single-SKU IP67 outdoor flagship tri-band Wi‑Fi 7 enterprise AP with built-in omnidirectional integrated internal antennas, four concurrent radios (3×4×4 tri-band client radios + dedicated CleanAir Pro scanning radio + integrated GNSS/BLE multi-IoT radio), exclusive dual 10G copper/fiber uplink ports, dual unified Catalyst 9800 on-prem CAPWAP or Meraki cloud dashboard management, industrial all-weather outdoor sealed chassis for stadiums, campus open areas, industrial parks, transit hubs and smart city street pole deployments requiring wide omnidirectional outdoor coverage
• CW9177D: Directional integrated internal antenna outdoor variant for targeted long-distance narrow-beam coverage along roadways, rail lines and long warehouse aisles
• CW9176I: Indoor flagship omnidirectional Wi‑Fi 7 AP without IP67 outdoor enclosure and SFP fiber port
• CW9178I: Ultra-high-density indoor four-radio 4×4×4×4 Wi‑Fi 7 AP with dual 10G copper ports and UWB high-precision indoor positioning
• Catalyst 916x Series: Previous generation indoor Wi‑Fi 6E APs without Wi‑Fi 7 MLO / 4K-QAM capabilities and no outdoor IP-rated chassis or fiber SFP uplink ports