|
Company Name：Kino Technology Limited
Website：www.kino86.com
Address ：Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person：kiki
Tel ：+8613040881925
E-mail：kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id： |
7239532816 |
ProductName： |
AIR-AP1815W-x-K9 |
Specification： |
|
Product Notes： |
|
Product Category： |
Cisco |
| |
|
| Product Description |
Cisco Aironet AIR-AP1815W-x-K9
Listing Title
Cisco Aironet AIR-AP1815W-x-K9 Configurable Wall-Plate 802.11ac Wave 2 Dual-Band Indoor Wireless Access Point, Built-in Internal Antennas, Integrated BLE 4.1, Supports Mobility Express Standalone and CAPWAP Controller Managed Mode
Full Commercial Product Description
The Cisco Aironet AIR-AP1815W-x-K9 belongs to the cost-effective Cisco Aironet 1800 Series enterprise indoor access points. This model adopts a unique wall-plate compact form factor, perfectly replacing standard US/EU wall outlet faceplates without extra protruding equipment, ideal for hotel rooms, hospital wards, dormitories and branch office workstations. It is a dual-mode configurable AP that supports two flexible deployment architectures: Mobility Express autonomous standalone mode for small networks without dedicated wireless controllers, and CAPWAP lightweight controller-managed mode for centralized large-scale enterprise wireless management.
Compliant with IEEE 802.11a/b/g/n/ac Wave 2 (Wi‑Fi 5) standards, the AP is equipped with two independent radios to provide simultaneous 2.4 GHz and 5 GHz wireless coverage. It features 2×2 MU‑MIMO architecture with two spatial streams on both frequency bands, delivering a maximum single-stream rate of 867 Mbps on the 5 GHz radio. Built-in transmit beamforming strengthens signal coverage, eliminates wireless dead zones, and improves receiving performance for mobile phones, laptops and tablet terminals.
The AIR-AP1815W-x-K9 integrates built-in omnidirectional dual-band internal antennas, with no external RTNC antenna ports required, maintaining a flat, neat wall-plate appearance. An embedded Bluetooth Low Energy (BLE 4.1) radio is native to this access point, supporting proximity beacon services, simple asset tracking and location marketing applications without additional external BLE sensor hardware.
Core Cisco RF optimization technologies are fully supported: BandSelect technology automatically steers dual-band capable client devices to the less congested 5 GHz frequency band; Radio Resource Management (RRM) dynamically adjusts working channels and transmit power across the entire wireless network; built-in rogue AP detection identifies unauthorized rogue wireless hotspots to enhance overall network security monitoring capability.
Hardware configuration includes a 710 MHz quad-core processor, 1 GB DRAM and 256 MB flash storage, providing stable multi-client concurrent forwarding performance. Interfaces contain one 10/100/1000BASE-T Gigabit Ethernet uplink port supporting IEEE 802.3af/at PoE power supply, plus one RJ45 RS‑232 console port for local device configuration and fault troubleshooting. The maximum power consumption under full load is only 8.3W, which can fully operate with standard 802.3af PoE switches without mandatory high-power PoE+ power injectors.
Comprehensive enterprise-grade security suites are supported: WPA/WPA2 encryption with AES algorithm, 802.1X port-based authentication, multiple EAP authentication protocols, 802.11r fast roaming technology for seamless VoIP voice call handoff, VLAN traffic segmentation and WMM QoS mechanism to prioritize voice, video and core business data traffic. Physical anti-tamper protection is realized via matching anti-tamper screws to prevent unauthorized disassembly and removal from wall sockets.
The ultra-flat wall-plate chassis can be directly mounted on standard wall electrical junction boxes, eliminating complicated ceiling mounting construction. It is widely deployed in hotel guest rooms, student dormitories, medical wards, small retail shops and low-to-medium density indoor wireless scenarios. The suffix "x" in the part number stands for different regional regulatory domains to comply with local radio frequency spectrum regulatory standards worldwide.
Key Specification Bullet Points
-
Model: AIR-AP1815W-x-K9
-
Wi-Fi Standard: IEEE 802.11a/b/g/n/ac Wave 2 (Wi‑Fi 5)
-
Radio Architecture: Simultaneous dual-band 2.4 GHz + 5 GHz; embedded BLE 4.1 beacon radio
-
MIMO Technology: 2×2 SU/MU‑MIMO, 2 spatial streams; maximum 867 Mbps single-stream rate on 5GHz
-
Antenna Type: Built-in integrated internal omnidirectional dual-band antennas, no external antenna ports
-
Core RF Technologies: Transmit Beamforming, BandSelect, RRM Radio Resource Management, Rogue AP Detection
-
Operation Mode: Configurable – Mobility Express Autonomous Standalone / CAPWAP Lightweight Controller-Managed AP
-
Processor & Memory: 710 MHz quad-core CPU, 1 GB DRAM, 256 MB Flash
-
Interfaces: 1 × Gigabit RJ45 Uplink (802.3af/at PoE supported), 1 × RJ45 RS-232 Console Port
-
Power Input: IEEE 802.3af PoE fully functional; max power draw 8.3W; compatible with AIR-PWRINJ5 / AIR-PWRINJ6 power injectors
-
Security Suite: WPA/WPA2, AES, 802.1X, multi-EAP, 802.11r fast roaming, VLAN isolation, WMM QoS
-
Physical Security: Anti-tamper security screws included
-
Mounting: Standard wall electrical junction box wall-plate mounting
-
Warranty: Limited Lifetime Hardware Warranty
-
Typical Application: Hotel guest rooms, student dormitories, hospital wards, small retail stores, low & medium density indoor enterprise wireless deployments
Model Quick Reference
-
AIR-AP1815W-x-K9: Wall-plate form factor configurable AP, internal antennas, dual-mode Mobility Express / CAPWAP
-
AIR-AP1815I-x-K9: Standard ceiling/wall mounted compact AP, internal omnidirectional antennas
-
AIR-CAP1815W-x-K9: Lightweight CAPWAP-only wall-plate AP without Mobility Express standalone capability
|
|
|
| Click：7 Entry Time：2026-07-23 【Print】 【Close】 |
|
|
|
|
