|
Company Name：Kino Technology Limited
Website：www.kino86.com
Address ：Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person：kiki
Tel ：+8613040881925
E-mail：kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id： |
7239491916 |
ProductName： |
AIR-AP1815I-x-K9 |
Specification： |
|
Product Notes： |
|
Product Category： |
Cisco |
| |
|
| Product Description |
Cisco Aironet AIR-AP1815I-x-K9
Listing Title
Cisco Aironet AIR-AP1815I-x-K9 Configurable Compact 802.11ac Wave 2 Dual-Band Indoor Wireless Access Point, Built-in Internal Omni Antennas, Integrated BLE 4.1, Support Mobility Express Standalone & CAPWAP Controller Mode
Full Commercial Product Description
The Cisco Aironet AIR-AP1815I-x-K9 belongs to the cost-effective Cisco Aironet 1800 Series enterprise indoor access points, designed for small, medium and branch office wireless deployments with compact form factor and flexible dual-mode operationCisco. This configurable AP supports two deployment architectures: Mobility Express autonomous standalone mode for networks without a dedicated wireless LAN controller, and CAPWAP lightweight controller-managed mode for centralized large-scale enterprise wireless management.
Compliant with IEEE 802.11a/b/g/n/ac Wave 2 (Wi‑Fi 5) standards, the AP features concurrent dual independent radios for simultaneous 2.4 GHz and 5 GHz service. It adopts 2×2 MU‑MIMO architecture with two spatial streams on both bands, delivering a maximum single-stream rate of 867 Mbps on the 5 GHz radio, greatly improving multi-client concurrent throughput compared to 802.11n and Wave 1 APs. Built-in transmit beamforming optimizes signal coverage, reduces dead zones and boosts reception performance for mobile terminals.
The AIR-AP1815I-x-K9 is equipped with integrated built-in omnidirectional dual-band internal antennas, eliminating external RTNC antenna ports for neat, low-profile wall or ceiling installation without extra antenna cabling. An embedded Bluetooth Low Energy (BLE 4.1) radio is integrated natively to support location beaconing, asset tracking and proximity marketing applications without separate external BLE sensorsCisco.
Core Cisco RF optimization technologies are supported: BandSelect steers dual-band capable clients to the less congested 5 GHz band; Radio Resource Management (RRM) auto-adjusts channel and transmit power across the wireless network; Rogue AP detection identifies unauthorized wireless hotspots for network security monitoringCisco.
Hardware specifications include a quad-core 710 MHz processor, 1 GB DRAM and 256 MB flash memory for stable multi-client operation. Interfaces consist of one 10/100/1000BASE-T Gigabit Ethernet uplink port supporting IEEE 802.3af/at PoE, plus an RJ45 RS‑232 console port for local device configuration and troubleshootingCisco. Maximum power consumption is only 8.3W under full load, enabling operation with standard 802.3af PoE switches without high-power PoE+ injectors as mandatory equipment.
Comprehensive enterprise security suites are fully supported: WPA/WPA2 with AES encryption, 802.1X port-based authentication, multiple EAP authentication protocols, 802.11r fast roaming for seamless VoIP handoff, VLAN segmentation and WMM QoS for prioritizing voice, video and business data trafficCisco. Physical security is reinforced with included Torx anti-tamper screws to prevent unauthorized removal from mounting brackets.
The compact, streamlined chassis supports standard ceiling rail and wall bracket mounting with the supplied AIR-AP-BRACKET8 mounting kit, ideal for small offices, retail stores, clinic branches, classrooms and low-to-medium density indoor wireless environmentsCisco. The suffix "x" in the part number represents different regional regulatory domains to comply with local radio frequency spectrum regulations worldwide.
Key Specification Bullet Points
-
Model: AIR-AP1815I-x-K9
-
Wi-Fi Standard: IEEE 802.11a/b/g/n/ac Wave 2 (Wi‑Fi 5)
-
Radio Architecture: Simultaneous dual-band 2.4 GHz + 5 GHz; embedded BLE 4.1 beacon radio
-
MIMO Technology: 2×2 SU/MU‑MIMO, 2 spatial streams; max 867 Mbps 5 GHz single-stream rate
-
Antenna Type: Built-in integrated internal omnidirectional dual-band antennas, no external antenna ports
-
Core RF Technologies: Transmit Beamforming, BandSelect, RRM Radio Resource Management, Rogue AP Detection
-
Operation Mode: Configurable – Mobility Express Autonomous Standalone / CAPWAP Lightweight Controller-Managed AP
-
Processor & Memory: 710 MHz quad-core CPU, 1 GB DRAM, 256 MB Flash
-
Interfaces: 1 × Gigabit RJ45 Uplink (802.3af/at PoE supported), 1 × RJ45 RS-232 Console Port
-
Power Input: IEEE 802.3af PoE fully functional; max power draw 8.3W; compatible with AIR-PWRINJ5 / AIR-PWRINJ6 power injectors
-
Security Suite: WPA/WPA2, AES, 802.1X, multi-EAP, 802.11r fast roaming, VLAN isolation, WMM QoS
-
Physical Security: Torx anti-tamper security screws included
-
Mounting: Ceiling rail mount, wall bracket mount (AIR-AP-BRACKET8 supplied)
-
Warranty: Limited Lifetime Hardware Warranty
-
Typical Application: Small offices, branch stores, education classrooms, low & medium density indoor enterprise wireless deployments
Model Quick Reference
-
AIR-AP1815I-x-K9: Standard indoor compact AP, internal omnidirectional antennas, dual-mode Mobility Express / CAPWAP
-
AIR-AP1815W-x-K9: Wall-plate form factor variant of 1815 series
-
AIR-CAP1815I-x-K9: Lightweight CAPWAP-only model without Mobility Express standalone capability
|
|
|
| Click：5 Entry Time：2026-07-23 【Print】 【Close】 |
|
|
|
|
