|
Company Name：Kino Technology Limited
Website：www.kino86.com
Address ：Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China
Contact Person：kiki
Tel ：+8613040881925
E-mail：kiki@szkiki.com
Wechat:+8613040881925
Whatspp: +8613040881925
Teams:kiki@szkiki.com
|
|
|
| Product >> Cisco >> ALL |
| |
|
Product_Id： |
7239293916 |
ProductName： |
AIR-AP3702E-x-K9 |
Specification： |
|
Product Notes： |
|
Product Category： |
Cisco |
| |
|
| Product Description |
Cisco Aironet AIR-AP3702E-x-K9
Listing Title
Cisco Aironet AIR-AP3702E-x-K9 Configurable 802.11ac Wave 1 Dual-Band Indoor Wireless Access Point, 4 RTNC External Antenna Ports, Modular Platform
Full Commercial Product Description
The Cisco Aironet AIR-AP3702E-x-K9 belongs to Cisco 3700 Series enterprise indoor wireless access points. This configurable dual-mode AP supports both autonomous standalone operation and CAPWAP lightweight controller-managed deployment, offering flexible network architecture selection for small businesses and large enterprise environments.
Compliant with IEEE 802.11a/b/g/n/ac Wave 1 standards, it delivers simultaneous dual-band wireless coverage across 2.4 GHz (2400–2500 MHz) and 5 GHz (5180–5865 MHz) frequency bandsCisco. Built on a 4×4 MIMO architecture with three spatial streams, the AP achieves a maximum aggregate wireless throughput of up to 1.3 Gbps, delivering high-capacity connectivity for multimedia streaming, cloud applications and high-user-density scenarios.
Distinguished from the internal-antenna AIR-AP3702I variant, the AIR-AP3702E-x-K9 is equipped with four RTNC external antenna connectors on the top panel, supporting a wide range of optional dual-band omnidirectional and directional external antennas (including AIR-ANT2524DB-R, AIR-ANT2566P4W-R and other Cisco certified antennas) to customize RF coverage shapes for complex indoor layouts such as long corridors, open offices and retail spacesCisco.
This access point adopts a modular hardware platform that accepts optional upgrade modules to expand advanced spectrum analysis and wireless intrusion prevention (wIPS) functionality. Integrated Cisco CleanAir Spectrum Intelligence actively detects, classifies, locates and mitigates non-Wi-Fi RF interference to stabilize wireless performance. Cisco ClientLink 3.0 with vector beamforming optimizes signal strength, throughput and battery efficiency for legacy Wi-Fi clients. Cisco High-Density Experience (HDX) technology incorporates cross-AP noise reduction and intelligent roaming to maintain consistent performance in high-concurrent-user environments.
Hardware interfaces include one 10/100/1000BASE-T Gigabit Ethernet port and one RJ45 console management port. Full 4×4 MIMO radio performance requires IEEE 802.3at PoE+ power supply; when powered by IEEE 802.3af PoE, radio capability will be restricted to 3×3 MIMO.
Comprehensive enterprise-grade security suites are fully supported, including WPA/WPA2, AES and TKIP encryption, 802.1X port-based authentication, a complete set of EAP authentication protocols, rogue AP detection and wireless intrusion prevention (wIPS) capabilities. It supports standard ceiling rail mounting and wall mounting brackets, suitable for corporate offices, educational campuses, shopping malls and medium-to-high density indoor enterprise wireless deployments.
The suffix "x" in the part number denotes different regional regulatory domains to comply with local radio frequency spectrum regulations worldwide.
Key Specification Bullet Points
-
Model: AIR-AP3702E-x-K9
-
Wi-Fi Standard: IEEE 802.11a/b/g/n/ac Wave 1
-
Radio: Simultaneous dual-band 2.4 GHz + 5 GHz
-
MIMO: 4×4, 3 spatial streams, Max aggregate throughput 1.3 Gbps
-
Antenna Interface: 4 × RTNC external antenna ports
-
Supported External Antennas: AIR-ANT2524DB-R, AIR-ANT2524DW-R, AIR-ANT2524DG-R, AIR-ANT2524V4C-R, AIR-ANT2544V4M-R, AIR-ANT2566P4W-R
-
Core RF Technologies: Cisco CleanAir Spectrum Intelligence, ClientLink 3.0, Vector Beamforming, HDX High-Density Experience, Cross-AP Noise Reduction
-
Platform Feature: Modular architecture, compatible with optional expansion modules
-
Operation Mode: Configurable – Autonomous Standalone / CAPWAP Lightweight AP
-
Interfaces: 1 × Gigabit RJ45 Port, 1 × RJ45 Console Port
-
Power Input: IEEE 802.3at PoE+ for full performance; IEEE 802.3af PoE supported with radio performance limitation
-
Security Suite: WPA/WPA2, AES, TKIP, 802.1X, multiple EAP authentication methods, Rogue AP Detection, wIPS Wireless Intrusion Prevention
-
Installation: Ceiling rail mount, wall bracket mount
-
Typical Application: Medium & high-density indoor enterprise wireless coverage
Model Quick Reference
-
AIR-AP3702E-x-K9: Configurable dual-mode AP, 4 RTNC external antenna ports
-
AIR-AP3702I-x-K9: Configurable dual-mode AP, built-in integrated internal antennas
-
AIR-CAP3702E-x-K9: Lightweight CAPWAP-only AP, 4 RTNC external antenna ports (no standalone autonomous mode)
|
|
|
| Click：10 Entry Time：2026-07-23 【Print】 【Close】 |
|
|
|
|
