Cisco AIR-SAP1602I-x-K9 Full English Product Description
1. Short Official Part & License Label
AIR-SAP1602I-x-K9: Cisco Aironet 1602I Autonomous Standalone Indoor Wireless Access Point, Simultaneous Dual-Band 2.4 GHz 802.11b/g/n + 5 GHz 802.11a/n, 3×3 MIMO (2 Spatial Streams), Runs Autonomous IOS Software, Integrated Omni-Directional Diversity Antennas, 10/100/1000BASE-T Gigabit Ethernet, Supports 802.3af PoE, CleanAir Express, ClientLink 2.0, BandSelect, VideoStream, Multi-SSID VLAN Tagging, WPA/WPA2 Enterprise Security, Non-Convertible to CAPWAP Lightweight Mode, End-of-Sale Standalone Enterprise 802.11n WLAN AP.
(Suffix "x" denotes regional regulatory domain: A=USA, E=Europe, C=China, K=Korea, etc.)
2. Full Product Overview
The Cisco AIR-SAP1602I-x-K9 belongs to the Aironet 1600 Series, a low-profile autonomous indoor wireless access point designed for small-to-medium enterprise offices, retail spaces and branch deployments. It ships preloaded withCisco Autonomous IOS, supporting fully standalone operation without requiring a wireless LAN controller. Unlike AIR-CAP1602I-x-K9, this SAP variantcannot be converted via firmware upgrade to CAPWAP lightweight modefor CUWN controller management.
Two independent radios operate simultaneously with 3×3 MIMO architecture (2 spatial streams):
-
2.4 GHz: IEEE 802.11b/g/n, maximum PHY rate up to 300 Mbps
-
5 GHz: IEEE 802.11a/n, maximum PHY rate up to 300 Mbps
Built-in omnidirectional diversity antennas deliver balanced indoor RF coverage for mixed-client environments consisting of legacy 2.4 GHz barcode scanners/IoT and modern 5 GHz Wi-Fi clients. The compact low-profile plastic enclosure simplifies ceiling tile and wall mounting deployments.
Power is supplied via IEEE 802.3af PoE, eliminating separate DC power adapters. The platform includes M-Drive technology suite: CleanAir Express for spectrum interference monitoring, ClientLink 2.0 to boost performance for legacy Wi-Fi clients, BandSelect to steer capable dual-band clients to less congested 5 GHz, and VideoStream optimized multicast for video applications. It supports multi-SSID virtual WLAN segmentation, enterprise authentication suites, WMM voice QoS, and Wireless Domain Services (WDS) for Layer 2 roaming across autonomous AP fleets.
Lifecycle Status: AIR-SAP1602I-x-K9 reached End-of-Sale (EoS) and End-of-Support (EoL). No new official firmware releases or feature development. Successor models include later generations of Catalyst Wi-Fi access points.
Key Differentiator vs AIR-CAP1602I-x-K9: AIR-SAP1602I runs autonomous IOS for standalone operation; CAP variant is lightweight CAPWAP requiring an AireOS WLC and cannot operate standalone. Critical difference: No firmware conversion path between SAP and CAP variants. Compared to older 1142N autonomous APs: Native 802.11n MIMO, CleanAir spectrum analysis, ClientLink 2.0 and BandSelect feature set.
3. Complete Hardware Physical & Interface Specifications
Form Factor & Mechanical
-
Form Factor: Low-profile indoor plastic enclosure, ceiling rail / wall mountable
-
Dimensions: 222 mm × 222 mm × 47 mm (8.7” × 8.7” × 1.84”)
-
Unit Weight: 0.86 kg (1.9 lbs)
-
Mounting: Standard ceiling tile mounting bracket compatible; security lock provision
Rear Panel Interface Layout
-
1× RJ45 10/100/1000BASE-T Gigabit Ethernet port, supports 802.3af PoE input
-
RJ45 Serial Console port for local CLI access and emergency recovery
-
Mode reset pushbutton for factory default restoration
Front Panel LED Status Indicator
Single multi-function Status LED:
-
Indicates boot progress, operational health, wireless activity and fault alerts
Power & Environmental Parameters
-
Power Options: IEEE 802.3af Class 3 PoE (No dedicated DC power barrel jack)
-
Typical power consumption: 12.95 W (dual radio active)
-
Operating Temperature: 0°C to 40°C (32°F to 104°F)
-
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
-
Humidity: 10%–90% non-condensing relative humidity
-
Regulatory Certifications: UL 60950-1, UL 2043, CE, FCC Class B EMC, Wi-Fi Alliance certified
Radio Hardware Specifications
2.4 GHz Radio (3×3 MIMO, 2 Spatial Streams)
-
Standards: IEEE 802.11b / 802.11g / 802.11n
-
Maximum PHY Rate: 300 Mbps (40 MHz channel)
-
Integrated diversity omnidirectional antenna gain: 4 dBi
5 GHz Radio (3×3 MIMO, 2 Spatial Streams)
-
Standards: IEEE 802.11a / 802.11n
-
Maximum PHY Rate: 300 Mbps (40 MHz channel)
-
Integrated diversity omnidirectional antenna gain: 4 dBi
-
Transmit power: Software configurable, capped per regional regulatory domain
-
Supported DFS channels for 5 GHz band
-
Maximum simultaneous BSSIDs (SSIDs): Up to 16 per radio
-
MRC Maximum Ratio Combining improves resistance to indoor multipath fading
Embedded Hardware Resources
-
RAM: 128 MB DDR3
-
Flash Storage: 32 MB for autonomous IOS firmware and persistent configuration
4. Core Autonomous IOS WLAN Feature Suite
1. Dual-Band RF Management & M-Drive Technologies
Independent radio configuration, adjustable transmit power, dynamic rate scaling, beacon tuning, mixed-mode protection for legacy clients, DTIM optimization.
CleanAir Express spectrum analysis; ClientLink 2.0 for legacy client optimization; BandSelect for dual-band client steering; VideoStream multicast video optimization.
2. Multi-SSID Virtual WLAN Segmentation
Multiple isolated SSIDs, independent VLAN tagging per WLAN, SSID broadcast control, wireless client isolation between users on the same broadcast domain.
3. Enterprise Wireless Security Suite
-
Encryption: WEP 40/128-bit, WPA (TKIP), WPA2 (AES-CCMP)
-
Authentication: Open, Shared Key, 802.1X, LEAP, PEAP, EAP-TLS, EAP-FAST
-
Additional security: MAC address filtering, rogue AP detection, broadcast key rotation, Management Frame Protection (MFP)
4. Voice & Multimedia QoS
Wi-Fi Multimedia (WMM) traffic prioritization, 802.1p CoS mapping, optimized for VoWLAN voice over wireless deployments.
5. Wireless Mobility
Wireless Domain Services (WDS) enabling fast Layer 2 roaming between autonomous APs; supports proxy Mobile IP for Layer 3 mobility scenarios.
6. Management & Diagnostics
-
Administration: Embedded HTML web GUI, IOS CLI via SSH, Telnet or serial console
-
Monitoring: SNMPv2c, syslog, real-time client association tables and radio statistics
-
Firmware upgrade via TFTP;No support for CAPWAP lightweight image conversion
7. Network Integration
Native interoperability with Catalyst switched infrastructure, trunk VLAN support, DHCP relay and static routing capabilities.
5. Typical Deployment Scenarios
-
Standalone dual-band autonomous wireless coverage for offices, retail spaces and enterprise branch sites without centralized wireless controllers
-
Legacy distributed autonomous WLAN architecture without CUWN wireless controllers
-
Mixed-client environments supporting legacy 2.4 GHz barcode scanners/IoT and high-speed 5GHz 802.11n laptop clients
-
Supplemental wireless coverage for backup and secondary office networks
-
Lab environments for training on modern autonomous IOS wireless configuration
6. Short Sales Listing Tagline
Cisco AIR-SAP1602I-x-K9 Legacy Aironet 1602I Autonomous Indoor Access Point, Simultaneous 2.4GHz 802.11b/g/n + 5GHz 802.11a/n, 3×3 MIMO (2 Spatial Streams), Runs Autonomous IOS, Integrated Omni-Directional Diversity Antennas, 10/100/1000BASE-T Gigabit Ethernet with 802.3af PoE, CleanAir Express, ClientLink 2.0, BandSelect & VideoStream, Multi-SSID VLAN Tagging, WPA/WPA2 Enterprise Security, Non-Convertible to CAPWAP Lightweight Mode, End-of-Sale Standalone Dual-Band 802.11n Enterprise Wireless Access Point
|
