Cisco FPR8140-K9 Full English Product Description
1. Short Official Part Number Label
FPR8140-K9: Cisco FirePOWER 8140 Modular NGIPS Security Chassis, 1U Rackmount, 3 Hot-Swap NetMod Slots, Support Hardware Stacking, Dual Redundant Hot-Swappable AC Power Supplies, 32GB Enterprise RAM, Industrial SSD Storage, Integrated LOM Remote Management, 12 Gbps Firewall Throughput / 6 Gbps Full NGIPS Inspection Throughput
2. Full Product Overview
The Cisco FirePOWER 8140 (FPR8140-K9) is the top-tier 1U modular next-generation intrusion prevention chassis in the legacy FirePOWER 8100 Series, built for high-traffic enterprise internet perimeters, large data center north-south gateways, core campus segmentation, high-capacity regional aggregation and premium MSSP multi-tenant inspection nodesCisco.
Equipped with dedicated security acceleration ASICs, this platform supports flexible port expansion via interchangeable hot-swappable NetMod I/O modules, allowing mixed deployment of 1G copper, 1G SFP fiber and 10G SFP+ interfaces without chassis replacement. Unique to the 8140 model within the 81xx lineup, it supports hardware stacking to combine two chassis for doubled throughput and port density, forming a 2U clustered security systemCisco. Hardware fail-open bypass modules eliminate single points of failure to preserve network connectivity during appliance power loss or hardware faults.
Powered by FXOS chassis orchestration and Firepower Threat Defense (FTD), the FPR8140-K9 leverages Cisco Talos global threat intelligence to deliver full multi-layer protection against exploits, zero-day malware, encrypted traffic and evasive attack vectors. Independent NSS Labs testing verifies consistent low-latency deep packet inspection under full production loads, with native logging and audit capabilities to satisfy PCI DSS, HIPAA, GDPR and other regulated industry compliance requirements.
This model reached End-of-Sale (EoS) December 15, 2017 and End-of-Support (EoS) June 10, 2024; Cisco no longer provides official software updates or hardware support. Available inventory consists of fully tested surplus and refurbished units onlyCisco.
3. Complete Hardware Specifications
Chassis & Physical Design
-
Form Factor: 1 standard rack unit (1U), standard 19-inch EIA rack-mount chassis
-
Airflow: Front-to-back hot-swappable redundant fan cooling system with fault status LED indicators
-
Power System: Dual redundant 1+1 hot-swappable universal AC power supplies; input voltage range 85–264 VAC, 47–63 Hz frequency
-
Memory: 32GB enterprise-grade DDR RAM for massive concurrent traffic analysis and heavy threat workload processing
-
Storage: High-capacity industrial solid-state drives (SSDs) for local event logging, AMP file cache and security rule storage
-
Remote Management: Integrated Lights-Out Management (LOM) + Serial-over-Ethernet console access for off-site power cycling, hardware diagnostics and remote troubleshooting
-
Front Panel: Built-in LCD diagnostic display, system status LEDs, drive fault indicators, port link/activity lights and physical reset button
-
Environmental Operating Range: 0°C–45°C operating temperature below 1829m altitude; 5%–90% non-condensing relative humidity
-
Stack Support: Native hardware stacking capability (unique among 8120/8130/8140); stacking kit combines two FPR8140 chassis for doubled performance and port capacityCisco
Modular NetMod Interface Architecture
3 universal hot-swap NetMod slots supporting free combination of bypass and non-bypass I/O modules, two module categories available:
-
Bypass NetMods (Inline Production Deployment)
-
4×10/100/1000BASE-T copper with hardware fail-open bypass
-
4×1000BASE-X SFP gigabit fiber
-
2×10GBASE-SR SFP+ short-reach fiber
-
2×10GBASE-LR SFP+ long-reach fiber
-
Non-Bypass NetMods (Passive Monitoring / Fail-Closed Deployment)
-
4×1G copper RJ45
-
4×1G SFP fiber
-
4×10G SFP+ SR / LR fiber
-
Dedicated isolated 10/100/1000 RJ45 out-of-band management port, logically separated from inspection traffic
-
Typical packet latency: <150 microseconds under full NGIPS inspection load
Official Performance Benchmarks
-
Firewall Throughput (No IPS inspection): 12 Gbps
-
Full NGIPS Threat Inspection Throughput: 6 Gbps
-
SSL/TLS Decryption Throughput: Up to 4 Gbps
-
Maximum Concurrent Active Connections: 5,000,000
-
New Connections Per Second: Up to 80,000
4. Software & Full Security Feature Suite
The FPR8140-K9 runs FXOS chassis management paired with Firepower Threat Defense (FTD OS), delivering the complete FirePOWER unified security stack:
-
Next-Generation IPS (NGIPS): Full Deep Packet Inspection (DPI), protocol anomaly detection, exploit signature matching and advanced evasion mitigation
-
Advanced Malware Protection (AMP) for Networks: Cloud-based file sandboxing, retrospective malware analysis, global file trajectory tracking and real-time threat outbreak alerts
-
Application Visibility & Control (AVC): Complete Layer 7 application identification, granular traffic filtering, QoS bandwidth shaping and policy-based traffic blocking
-
URL & IP/Domain Reputation Filtering: Global web category database, malicious domain/IP reputation lookup and encrypted web threat detection
-
Identity-Aware Policy Enforcement: Native integration with Active Directory, Cisco ISE, user/group context-based access control rules
-
Real-Time Threat Intelligence Orchestration: Auto-synchronized Cisco Talos threat feeds, custom IOC import and dynamic malicious IP blacklisting
-
High Availability & Stacking Modes: Active/Passive and Active/Active failover; copper bypass modules maintain network continuity during appliance outage; hardware stacking supports clustered throughput expansion
-
Centralized Security Management: Fully managed via Firepower Management Center (FMC) for unified policy deployment, centralized event logging, cross-device reporting and automated security workflow orchestration
5. Target Deployment Scenarios
-
High-capacity enterprise internet border north-south traffic inspection
-
Large-scale data center internal east-west traffic segmentation
-
Headquarters multi-site high-volume traffic aggregation security gateway
-
Premium MSSP multi-tenant high-throughput threat inspection nodes
-
Regulated finance, healthcare and government industry compliance traffic monitoring
-
Hybrid copper/fiber inline security deployments requiring hardware fail-open resilience and scalable stacking performance
6. Short Sales Listing Tagline
Cisco FPR8140-K9 FirePOWER 8140 Modular Stackable NGIPS Security Chassis, 1U Rackmount, 3 Hot-Swap NetMod Expansion Slots, Dual Redundant Hot-Swappable AC PSU, 32GB RAM, SSD Storage, LOM Remote Management, Up to 12Gbps Firewall / 6Gbps Full IPS Throughput, Hardware Stacking Supported, FTD OS with AMP, AVC & Real-Time Talos Threat Intelligence, Centralized FMC Management, EOL Discontinued Legacy FirePOWER 8100 Series Platform
|
