Full English Description for Cisco Catalyst CG113-4GW6Z

1. Official Short Order Description (Datasheet Standard Format)

2. Complete Detailed Product Overview

Product Line Positioning

Physical Hardware & Interface Architecture

Form Factor & Mechanical Design

• Compact white plastic fanless desktop chassis, zero operational noise for indoor home/office deployment only
• Front multi-color LED indicators: Power, wired WAN, SIM registration, cellular signal strength, Wi‑Fi radio, SD-WAN tunnel status and fault alerts
• Fully integrated internal omnidirectional antennas for Wi‑Fi dual bands and LTE cellular (no external antenna cables required)
• Recessed physical reset button for end-user local factory-default restoration
• Flat base rubber feet for stable desktop placement, no rack-mount capability

Back Panel Fixed Port Layout

1. 1 × 2.5GBASE-T Multi-Gigabit Combo RJ45 Port
   Dual-mode configurable primary wired WAN (ISP modem) or corporate LAN uplink; auto-negotiates 10/100/1000/2500 Mbps speeds.
2. 2 × 10/100/1000BASE-T Gigabit LAN RJ45 Ports
   Integrated Layer 2 switch ports for wired workstations, IP phones, printers and local peripherals.
3. Dual Nano SIM Card Slots (LTE Cellular)
   Supports active/standby carrier redundancy; administrators define primary/secondary cellular profiles for automatic cross-carrier failover during signal loss or outages.
4. USB Type‑C Universal Power Input Port
   Compatible with included AU/NZ 100–240V AC wall adapter or third-party USB‑C PD power banks for temporary portable field deployment.

Built-In Wireless Subsystems

1. Wi‑Fi 6 Dual-Band 2×2 MIMO (802.11ax), Domain Z ANZ Regulatory (ACMA Compliant)
   • 2.4 GHz band (4dBi internal antenna gain): Supports 802.11b/g/n/ax for IoT and low-bandwidth devices
   • 5 GHz band (5dBi internal antenna gain): 802.11a/n/ac/ax with MU‑MIMO and OFDMA for low-latency video conferencing, SaaS and large file transfers; adheres to Australian ACMA 5GHz channel and transmit power rules
   • Dual isolated SSID segmentation: Dedicated corporate work SSID routed over encrypted SD-WAN tunnel, separate personal home SSID with direct internet breakout to isolate business and personal traffic flows
2. 4G LTE Cat7 Cellular Modem (ANZ Domain Z Band Support)
   Optimized for Australian and New Zealand carrier LTE bands including B1, B3, B7, B8, B28 (APT 700MHz), covering Telstra, Optus, Vodafone Australia and major NZ mobile operators. Peak cellular throughput: 300 Mbps down / 100 Mbps up, automatic fallback to 3G UMTS where LTE is unavailable. Two mixed-polarity internal LTE omnidirectional antennas (2.1–4.1dBi gain) deliver stable indoor cellular signal reception.

Core Hardware Resource Specifications

• Multi-core enterprise-grade processing CPU
• Memory: 2 GB DDR4 ECC DRAM, 1 GB NAND flash local storage for IOS CG OS, device configurations and event logsCisco
• Dedicated on-board AES hardware encryption acceleration to offload IPsec tunnel processing and eliminate CPU congestion
• Power Input: 9V / 12V DC via USB‑C; AU/NZ regional AC wall adapter included for ANZ deployments
• Operating Environment: 0°C to +45°C ambient temperature, 10%–90% non-condensing humidity, maximum 3000m altitude; fully ACMA (Australia) and RSM (New Zealand) RF certified
• Storage Conditions: -25°C to +70°C, 5%–95% RH non-condensing, max 4570m altitude

Supported Network & SD-WAN Feature Suite (IOS CG OS 17.9.1a+)

1. Dual WAN Link Resiliency (Wired Broadband + 4G LTE Cellular)

• Policy-triggered automatic failover from primary 2.5G wired WAN to secondary LTE cellular uplink during ISP outages
• Configurable link health probes, bandwidth thresholds and priority ranking to control failover logic
• Standby SIM automatic carrier switchover if primary SIM loses cellular registration
• Application SLA-aware traffic steering and bandwidth load balancing across wired/cellular uplinks based on latency, packet loss and jitter metrics

2. Cisco Catalyst SD-WAN Secure Overlay Architecture

• Hardware-accelerated IKEv2 IPsec SD-WAN tunnels back to corporate vBond, vSmart and vManage control plane
• Encrypted overlay fabric extending centralized enterprise routing, segmentation and security policies to remote home premises
• Zero-Touch Provisioning (ZTP): Pre-staged device templates auto-download full corporate configuration once the CG113-4GW6Z connects to public internet, eliminating manual on-site setup
• Consistent end-to-end policy enforcement matching physical branch ISR routers

3. Dual-Stack IPv4 / IPv6 Routing & Integrated Switching

• Static routing, policy-based routing (PBR) for application-specific traffic steering
• Built-in 3-port Layer 2 switch with logical segmentation between corporate LAN and personal home networks
• Local DHCP server/relay for wired and Wi‑Fi connected endpoints, local DNS caching
• NAT/PAT, static one-to-one NAT and port forwarding for secure remote access to local work hardware

4. Enterprise Unified Security Stack

1. Stateful SPI firewall with ingress/egress ACL filtering for wired, Wi‑Fi and cellular traffic flows
2. Native Cisco Umbrella DNS-layer threat protection to block malware, ransomware and phishing domains
3. WPA2/WPA3 enterprise-grade Wi‑Fi security, 802.1X EAP authentication for the corporate work SSID
4. Complete traffic isolation between work SSID and personal home SSID to prevent lateral data leakage
5. Encrypted administrative access only: HTTPS local web UI, TLS secured vManage control connections
6. Local log retention + remote Syslog export to corporate SIEM platforms for audit and threat tracking

5. Application-Aware Hierarchical QoS & Bandwidth Management

• Deep application recognition to classify Microsoft Teams, Zoom, enterprise SaaS, streaming media and P2P file-sharing traffic
• 4-level hierarchical priority queuing to prioritize real-time voice/video conferencing over recreational internet traffic
• Per-link bandwidth shaping on both wired and cellular uplinks to avoid congestion
• DSCP marking preservation across SD-WAN IPsec tunnels for uniform enterprise QoS policy enforcement end-to-end

Management & Monitoring Toolchain

1. Centralized IT Administration via Cisco vManage SD-WAN Manager
   Full device lifecycle management including template configuration, bulk firmware upgrades, real-time performance dashboards, tunnel health alerts, cellular signal telemetry and cross-remote-worker policy updates. Supports REST API automation and Cisco DNA subscription integration.
2. Simplified Local End-User Web UI
   Password-protected lightweight browser dashboard for remote employees to view connection status, adjust personal Wi‑Fi SSID/password, run basic connectivity diagnostics and interpret LED fault codes; locked from modifying corporate SD-WAN tunnel and security configurations.
3. Monitoring Protocols: SNMPv3, persistent event logging, real-time cellular signal strength telemetry, tunnel uptime reporting streamed to vManage centralized dashboards.

Typical Deployment Scenarios

1. Australia & New Zealand hybrid remote worker home-office SD-WAN gateway with redundant 4G LTE cellular backup for ISP broadband failures
2. Portable enterprise connectivity for field sales, contractors and temporary staff via USB‑C power bank operation
3. Small retail kiosks, pop-up stores and satellite business locations across ANZ without fixed wired ISP service
4. Business continuity disaster recovery remote workforce solution when primary office internet infrastructure experiences outages
5. Distributed healthcare, education and financial remote staff secure encrypted access to internal corporate applications and file servers

3. E-commerce Short Marketing Description

4. Product Catalog Keyword Tags

Naming Rule Explanation

• CG: Catalyst Gateway, Cisco dedicated remote teleworker wireless SD-WAN gateway product family
• 113: Platform generation identifier for compact home-office SD-WAN gateways
• 4G: Embedded integrated 4G LTE Cat7 cellular radio (distinguishes Wi‑Fi‑only CG113-W6 variants)
• W6: Integrated Wi‑Fi 6 (802.11ax) dual-band wireless subsystem
• Z: Region Domain Z regulatory/LTE band variant optimized for Australia and New Zealand; contrasted with CG113-4GW6A (Domain A global worldwide LTE bands), CG113-4GW6B (Domain B Americas), CG113-4GW6E (Domain E EMEAR/ASEAN), CG113-4GW6H (Domain H China)
  All CG113-4GW6x models share identical hardware, feature set and SD-WAN software capabilities; only cellular frequency bands and regional RF regulatory certification differ by suffix letter (A/B/E/H/Z)Cisco.