Full English Description for Cisco RV350P

1. Official Short Order Description (Datasheet Standard Format)

Cisco RV350P: Cisco RV35X Next-Generation PoE-Enabled Dual-Gigabit-WAN Multi-Service UTM VPN Router, compact rack-mountable metal chassis with two independent Gigabit RJ45 WAN ports for link load balancing & automatic failover, integrated 4-port managed Gigabit LAN switch fully equipped with IEEE 802.3at PoE+ power delivery, dual USB 3.0 ports for 4G/5G cellular backup modems and offline configuration storage, RJ45 serial console port for SSH CLI access, upgraded dedicated hardware crypto acceleration ASIC, enterprise-grade SPI stateful inspection firewall with full DoS & DDoS mitigation, dual-stack IPv4/IPv6, up to 100 IPsec site-to-site tunnels + 100 Cisco AnyConnect SSL remote VPN tunnels plus native OpenVPN/L2TP/PPTP support, AI-powered application control, real-time cloud dynamic URL web filtering, native built-in Cisco Umbrella cloud DNS threat security, multi-layer hierarchical QoS, 1 Gbps line-rate NAT throughput, 800 Mbps hardware-accelerated IPsec VPN throughput, unified responsive HTTPS web GUI + SNMP v3 remote management. All-in-one PoE branch gateway without built-in Wi-Fi; non-PoE counterpart is RV350, wireless variant RV350W, high-density 16-port PoE model RV355P.

2. Complete Detailed Product Overview

Product Line Positioning

The Cisco RV350P is the PoE-integrated compact model of Cisco’s next-gen RV35X SMB UTM router family, sharing identical high-performance routing, security and VPN hardware with base RV350 while adding full 802.3at PoE+ on all four LAN ports to power IP phones, wireless access points and IP surveillance cameras without separate PoE injectors or external PoE switches. Designed for 30–60 concurrent user small-to-medium branch offices, retail chain locations and regional corporate field sites deploying wired PoE endpoints, it delivers triple-layer internet redundancy: dual primary GE WAN uplinks plus USB 4G/5G cellular tertiary backup to eliminate single-point internet outages. It consolidates routing, Layer 2 managed switching, full UTM threat defense and multi-protocol encrypted VPN connectivity in a silent compact rack-mountable chassis. Supported by Cisco FindIT network discovery, remote PnP mass multi-branch deployment and Cisco Limited Lifetime Hardware Warranty, with continuous official firmware security patch releases. Optimized for fiber/cable broadband branch deployments requiring integrated PoE power and high VPN throughput.

Physical Hardware Interface Architecture

Dual Independent Gigabit WAN RJ45 Ports

2× separate auto-sensing 10/100/1000BASE-T WAN interfaces supporting dual operation modes:

Automatic failover: Instant traffic cutover to secondary WAN upon primary circuit loss
Bandwidth load balancing: Aggregate bandwidth across two broadband uplinks to boost total internet capacity

Compatible with all mainstream broadband authentication: Static IP, DHCP client, PPPoE, PPTP, L2TP.

Built-In 4-Port Full PoE+ Managed Gigabit LAN Switch

4× auto-sensing 10/100/1000BASE-T RJ45 LAN ports, all compliant with IEEE 802.3at PoE+ standard:

Maximum 30W power output per PoE port
Total system PoE power budget of 60W to support up to four high-power PoE endpoints simultaneously

Full enterprise Layer 2 managed functions:
Up to 4094 configurable 802.1Q tagged VLANs with inter-VLAN routing capability
802.1X port-based wired authentication security
RSTP Rapid Spanning Tree Protocol for layer 2 loop prevention
Port mirroring for traffic audit, troubleshooting and compliance logging
Port-level 802.1p CoS priority marking, jumbo frame support up to 1536 bytes

All ports comply with IEEE 802.3/802.3u/802.3ab; Cat5e or higher cabling required for full Gigabit throughput and stable PoE power transmission.

Auxiliary Control & Backup Interfaces

Dual USB 3.0 Type-A ports: Backward compatible with USB 2.0, certified for 4G/5G/LTE USB cellular modems as tertiary backup internet link; also supports USB flash drives for offline firmware upgrades, full config import/export and local log storage
RJ45 RS232 serial console port: Local SSH CLI access for advanced scripting, bulk configuration editing and deep diagnostics
Recessed factory reset button, power toggle switch, Kensington anti-theft security lock slot
Front panel multi-color LED indicators: Power, WAN1/WAN2 link status, LAN 1–4 port activity, PoE power delivery status, USB connectivity, VPN tunnel status and system fault alarms for real-time visual monitoring

Dual-Form Factor Mechanical Design

Solid black metal chassis supporting flat desktop placement or standard 19-inch rack installation with included rack mounting brackets; passive heat dissipation with optimized vent layout to handle PoE power load without noisy fans, powered by an efficient high-current external DC power adapter to sustain full PoE budget operation.

Core Performance Hardware Benchmarks

Next-gen dedicated hardware encryption acceleration ASIC
Maximum NAT throughput (dual GE WAN full-duplex): 1 Gbps line-rate TCP/UDP traffic
Maximum concurrent NAT sessions: 60,000
Encrypted VPN throughput benchmarks:
- IPsec site-to-site: 800 Mbps (AES-256 hardware offload, IKEv1/IKEv2)
- Cisco AnyConnect SSL VPN: 80 Mbps
- OpenVPN remote access: 60 Mbps
- PPTP remote access: 120 Mbps
Supported VPN tunnel capacity:
- 100 IPsec gateway-to-gateway site-to-site tunnels (GRE, hub-spoke, pre-built AWS/Azure cloud interconnection templates)
- 100 Cisco AnyConnect SSL remote access tunnels for cross-platform laptop/mobile workforce
- Concurrent L2TP / PPTP / OpenVPN remote client tunnels fully supported
QoS traffic queues: 4 independent hierarchical priority queues optimized for real-time voice, video conferencing and business-critical applications
Maximum configurable 802.1Q VLAN segments: Up to 4094

Supported Network Protocols (Dual IPv4 + IPv6 Full Stack)

WAN Authentication Protocols

Ethernet WAN modes: Static IP, DHCP client, PPPoE, PPTP, L2TP broadband uplink authentication

LAN & Dynamic Routing Services

DHCP server/relay agent, DHCPv6 server for IPv6 endpoints, DNS proxy, IGMP multicast proxy, Dynamic DDNS (DynDNS, No-IP), static routing, RIP v1/v2 (IPv4), RIPng (IPv6), 6to4 tunneling, inter-VLAN routing capability

NAT & Application Gateway (ALG) Functions

PAT port address translation, one-to-one static policy NAT, port forwarding, port triggering, software configurable DMZ host; ALG pass-through for SIP VoIP, FTP, HTTP, IPsec/PPTP/L2TP/OpenVPN client traffic

Switch Layer Standards

802.1Q VLAN tagging, 802.1w RSTP rapid spanning tree, port mirroring, 802.1X port security authentication, IEEE 802.3at PoE+ power delivery standard

Integrated Unified Threat Management (UTM) Security Suite

SPI Stateful Packet Inspection Firewall

Blocks SYN flood, ICMP echo storm, UDP/TCP flood and all mainstream DoS/DDoS attack vectors; granular inbound/outbound IP/MAC-based access control lists (ACLs) for precise traffic filtering
AI-Driven Application Control & Real-Time Cloud Web Filtering

Identifies and restricts thousands of cloud applications, social media, streaming and P2P services; cloud-backed global URL filtering database covering billions of domains across 85+ content categories to block malicious, phishing and unproductive web content
Native Built-In Cisco Umbrella Cloud Security

Baseline DNS-layer threat defense against malware, ransomware and phishing sites with centralized cross-branch threat reporting, no extra subscription activation required
Hardware-Accelerated Multi-Protocol VPN Security

IPsec tunnels with AES-128/192/256, 3DES encryption, MD5/SHA1/SHA256 authentication and IKEv2 support; native AnyConnect SSL VPN, OpenVPN, L2TP and PPTP remote access tunnels for distributed remote workforce connectivity
Administrative Access Hardening

Two-tier privilege model (full admin / read-only guest), mandatory HTTPS encrypted web management, complex password enforcement, local log buffer storage, remote Syslog server export and email alert notifications for security incidents and link outages
IP Source Guard

Binds IP addresses to MAC addresses to block internal LAN IP spoofing attacks

Intelligent Multi-Link QoS & Bandwidth Management

Port-level 802.1p LAN traffic marking, application-aware WAN bandwidth shaping
Four hierarchical traffic queues to prioritize real-time voice/video conferencing above recreational internet traffic
Global uplink bandwidth rate limiting to prevent single endpoints from saturating dual fiber/copper WAN circuits
Full DSCP marking recognition for consistent end-to-end QoS across multi-site IPsec VPN topologies
Per-application bandwidth throttling for high-consumption streaming/P2P traffic
PoE power scheduling and per-port power limit adjustment for energy efficiency and endpoint protection

Power, Mechanical & Environmental Specifications

Form Factor: Metal rack-mountable/desktop chassis, compatible with standard 19-inch server racks with included mounting brackets
Physical Dimensions (W × D × H): 250 × 160 × 44 mm
Unit weight: 1.15 kg
Power supply: External high-capacity AC-DC adapter supporting full 60W PoE power budget
Operating temperature: 0°C ~ 40°C (32°F ~ 104°F)
Storage temperature: -20°C ~ 70°C (-4°F ~ 158°F)
Operating humidity: 10%–85% non-condensing
Storage humidity: 5%–90% non-condensing
Compliance Certifications: UL 60950-1, IEC/EN 60950-1, FCC Class A, CE, IC safety & EMC, RoHS environmental standards, IEEE 802.3at PoE+ certified
Warranty: Cisco Limited Lifetime Hardware Protection

Device Management & Deployment Tools

Dual Independent Management Interfaces
- Responsive modern HTTPS web GUI with step-by-step visual setup wizards for rapid zero-training deployment
- Serial console SSH command-line interface for advanced scripting, diagnostics and bulk configuration editing
Discovery & Mass Deployment Protocols

SNMP v3, UPnP, Bonjour mDNS, Cisco FindIT Network Utility for unified visibility of all Cisco SMB network devices on the local LAN; supports remote Plug and Play (PnP) mass deployment for multi-branch enterprise rollouts
Configuration & Firmware Operations

Full running-config export/import file backup, firmware upgradable via web upload, USB flash drive or Cisco FindIT cloud platform

Typical Deployment Scenarios

PoE-enabled dual-WAN fiber broadband small/medium office core internet gateway, multi-branch retail IPsec site-to-site VPN router powering IP phones and Wi-Fi access points, regional remote field office secure interconnection with dual link redundancy, primary dual GE WAN gateway with USB 4G/5G cellular tertiary backup failover, enterprise remote worker AnyConnect/OpenVPN SSL VPN termination device, small enterprise segregated staff/guest inter-VLAN routing gateway, compact rack-mount all-in-one branch edge router combining routing, switching and PoE power delivery for centralized telecom closet deployments with limited rack space.

Note: The RV350P is the latest-generation PoE compact SMB Gigabit UTM router with ongoing Cisco firmware security support, designed for small/medium branch fiber/copper broadband deployments requiring integrated PoE power for wired endpoints and not intended for high-capacity enterprise core or carrier-grade edge backbone environments. It differs from non-PoE RV350 (no PoE power), RV350W (wireless Wi-Fi 6 variant), RV355 (16-port non-PoE high-density LAN) and RV355P (16-port PoE+ powered variant).

3. E-commerce Short Marketing Description

Cisco RV350P PoE-Enabled Dual-Gigabit-WAN Next-Gen Small Business UTM VPN Router, metal rack-mountable/desktop chassis with dual independent GE WAN ports for load balancing & auto failover, built-in 4-port full 802.3at PoE+ managed Gigabit LAN switch (60W total PoE budget), dual USB 3.0 ports for 4G/5G cellular backup failover, RJ45 serial console SSH CLI access, upgraded dedicated hardware crypto acceleration, SPI DoS/DDoS-protection enterprise firewall, dual-stack IPv4/IPv6, up to 100 IPsec site-to-site + 100 AnyConnect SSL remote VPN tunnels plus native OpenVPN support, AI application control & real-time cloud URL web filtering, built-in Cisco Umbrella DNS threat security, 1 Gbps NAT / 800 Mbps IPsec VPN throughput, dual web GUI / SNMP v3 management, Limited Lifetime Hardware Protection, all-in-one compact PoE multi-link branch gateway for small-medium offices, retail multi-branch and remote business secure broadband & multi-site encrypted VPN connectivity for IP phones and wireless APs.

4. Product Catalog Keyword Tags

Cisco, RV350P, Cisco RV35X Next-Generation Series, PoE-Enabled Dual-Gigabit-WAN Multi-Service UTM VPN Router, Metal Rack-Mountable/Desktop Chassis, Dual Independent Gigabit RJ45 WAN Ports (Load Balance / Auto Failover), 4-Port Managed Gigabit LAN Switch (All Ports IEEE 802.3at PoE+, 60W Total PoE Budget), Up to 4094 802.1Q VLANs with Inter-VLAN Routing, Dual USB 3.0 for 4G/5G/LTE Modem Redundancy & Storage, RJ45 Serial Console SSH CLI, Upgraded Dedicated Hardware Encryption Acceleration, SPI Stateful Inspection Firewall, Full DoS/DDoS Attack Prevention, IP Source Guard Anti-Spoofing, Dual-Stack IPv4/IPv6, 100 IPsec Site-to-Site Tunnels (IKEv2/GRE / AWS/Azure Cloud Templates), 100 Cisco AnyConnect SSL Remote VPN Tunnels, Native OpenVPN / L2TP / PPTP Remote Access Support, AES-256 Hardware VPN Offload, AI-Powered Application Traffic Control, Real-Time Dynamic Cloud URL Web Filtering, Built-In Cisco Umbrella Cloud DNS Threat Security, 4-Queue Hierarchical QoS Traffic Prioritization, RSTP / 802.1X Port Security Support, 1 Gbps NAT Throughput, 800 Mbps IPsec VPN Throughput, Cisco FindIT Network Discovery & Remote PnP Mass Deployment, Modern HTTPS Web GUI & SNMP v3 Management, Compact All-In-One PoE Fiber Branch Gateway, Multi-Branch Retail IPsec VPN Router, Cisco Limited Lifetime Hardware Protection

Naming Rule Explanation

RV: Cisco RV Series identifier for mid-to-high tier small business wired/wireless multifunction UTM VPN routers
350P: Compact dual-GE-WAN 4-port PoE+ rack-mount next-gen model number;
- RV350: Base non-PoE wired compact model
- RV350W: Wireless Wi-Fi 6 variant without PoE
- RV355: High-density 16-port non-PoE LAN variant
- RV355P: 16-port LAN with higher-capacity 802.3at PoE+ power budget variant
  
  All RV35X family models share identical upgraded routing, security, VPN and firmware feature sets, differing only in LAN port quantity, PoE power delivery and wireless hardware.


	© 2026 Kino Technology Limited. All Rights Reserved. \| Hong Kong Registered · Shenzhen Operation \| New & Genuine Used Network Equipment Supplier