Full English Description for Cisco RV350
1. Official Short Order Description (Datasheet Standard Format)
Cisco RV350: Cisco RV35X Series Next-Generation Wired Dual-Gigabit-WAN Multi-Service UTM VPN Router, compact fanless rack-mountable metal chassis equipped with two independent Gigabit RJ45 WAN ports for link load balancing & automatic failover, integrated 4-port managed Gigabit LAN switch, dual USB 3.0 ports for 4G/5G cellular backup modems and offline configuration storage, RJ45 serial console port for SSH CLI access, upgraded dedicated hardware crypto acceleration ASIC, enterprise-grade SPI stateful inspection firewall with full DoS & DDoS mitigation, dual-stack IPv4/IPv6, up to 100 IPsec site-to-site tunnels + 100 Cisco AnyConnect SSL remote VPN tunnels plus native OpenVPN/L2TP/PPTP support, AI-powered application control, real-time cloud dynamic URL web filtering, native Cisco Umbrella cloud DNS threat security, multi-layer hierarchical QoS, 1 Gbps line-rate NAT throughput, 800 Mbps hardware-accelerated IPsec VPN throughput, unified responsive HTTPS web GUI + SNMP v3 remote management. Wired-only mid-market branch gateway without built-in Wi-Fi or PoE; variants include wireless RV350W, high-density 16-port RV355, PoE-capable RV355P.
2. Complete Detailed Product Overview
Product Line Positioning
The Cisco RV350 is the base flagship model of Cisco’s new-gen RV35X SMB UTM router family, successor to the legacy RV340 platform with fully upgraded processing, doubled VPN tunnel capacity, faster USB 3.0 interfaces, stronger hardware encryption, expanded cloud security integration and higher overall throughput. Designed for 30–60 concurrent user small-to-medium branch offices, multi-chain retail stores and regional corporate field sites, it delivers triple-layer internet redundancy: dual primary GE WAN links plus USB 4G/5G cellular tertiary backup to eliminate single-point outages. It consolidates routing, Layer 2 managed switching, full UTM threat defense and multi-protocol encrypted VPN connectivity in a compact silent rack-mountable chassis. Supported by Cisco FindIT network discovery, remote PnP mass multi-branch deployment and Cisco Limited Lifetime Hardware Warranty, with continuous official firmware security patch releases. Optimized for fiber/cable broadband branch deployments requiring high VPN performance and robust unified threat protection.
Physical Hardware Interface Architecture
Dual Independent Gigabit WAN RJ45 Ports
2× separate auto-sensing 10/100/1000BASE-T WAN interfaces supporting dual operation modes:
-
Automatic failover: Instant traffic cutover to secondary WAN upon primary circuit loss
-
Bandwidth load balancing: Aggregate bandwidth across two broadband uplinks to boost total internet capacity
Compatible with all mainstream broadband authentication: Static IP, DHCP client, PPPoE, PPTP, L2TP.
Built-In 4-Port Managed Gigabit LAN Switch
4× auto-sensing 10/100/1000BASE-T RJ45 LAN ports with full enterprise Layer 2 managed functions:
-
Up to 4094 configurable 802.1Q tagged VLANs with inter-VLAN routing capability
-
802.1X port-based wired authentication security
-
RSTP Rapid Spanning Tree Protocol for layer 2 loop prevention
-
Port mirroring for traffic audit, troubleshooting and compliance logging
-
Port-level 802.1p CoS priority marking, jumbo frame support up to 1536 bytes
All ports comply with IEEE 802.3/802.3u/802.3ab; Cat5e or higher cabling required for full Gigabit throughput.
Auxiliary Control & Backup Interfaces
-
Dual USB 3.0 Type-A ports: Backward compatible with USB 2.0, certified for 4G/5G/LTE USB cellular modems as tertiary backup internet link; also supports USB flash drives for offline firmware upgrades, full config import/export and local log storage
-
RJ45 RS232 serial console port: Local SSH CLI access for advanced scripting, bulk configuration editing and deep diagnostics
-
Recessed factory reset button, power toggle switch, Kensington anti-theft security lock slot
-
Front panel multi-color LED indicators: Power, WAN1/WAN2 link status, LAN 1–4 port activity, USB connectivity, VPN tunnel status and system fault alarms for real-time visual monitoring
Dual-Form Factor Mechanical Design
Solid black metal chassis supporting flat desktop placement or standard 19-inch rack installation with included rack mounting brackets; fanless passive heat dissipation delivers zero operational noise for telecom closets, open offices and quiet remote branch environments, powered by an efficient external 12V DC power adapter.
Core Performance Hardware Benchmarks
-
Next-gen dedicated hardware encryption acceleration ASIC
-
Maximum NAT throughput (dual GE WAN full-duplex): 1 Gbps line-rate TCP/UDP traffic
-
Maximum concurrent NAT sessions: 60,000
-
Encrypted VPN throughput benchmarks:
-
IPsec site-to-site: 800 Mbps (AES-256 hardware offload, IKEv1/IKEv2)
-
Cisco AnyConnect SSL VPN: 80 Mbps
-
OpenVPN remote access: 60 Mbps
-
PPTP remote access: 120 Mbps
-
Supported VPN tunnel capacity:
-
100 IPsec gateway-to-gateway site-to-site tunnels (GRE, hub-spoke, pre-built AWS/Azure cloud interconnection templates)
-
100 Cisco AnyConnect SSL remote access tunnels for cross-platform laptop/mobile workforce
-
Concurrent L2TP / PPTP / OpenVPN remote client tunnels fully supported
-
QoS traffic queues: 4 independent hierarchical priority queues optimized for real-time voice, video conferencing and business-critical applications
-
Maximum configurable 802.1Q VLAN segments: Up to 4094
Supported Network Protocols (Dual IPv4 + IPv6 Full Stack)
WAN Authentication Protocols
Ethernet WAN modes: Static IP, DHCP client, PPPoE, PPTP, L2TP broadband uplink authentication
LAN & Dynamic Routing Services
DHCP server/relay agent, DHCPv6 server for IPv6 endpoints, DNS proxy, IGMP multicast proxy, Dynamic DDNS (DynDNS, No-IP), static routing, RIP v1/v2 (IPv4), RIPng (IPv6), 6to4 tunneling, inter-VLAN routing capability
NAT & Application Gateway (ALG) Functions
PAT port address translation, one-to-one static policy NAT, port forwarding, port triggering, software configurable DMZ host; ALG pass-through for SIP VoIP, FTP, HTTP, IPsec/PPTP/L2TP/OpenVPN client traffic
Switch Layer Standards
802.1Q VLAN tagging, 802.1w RSTP rapid spanning tree, port mirroring, 802.1X port security authentication
Integrated Unified Threat Management (UTM) Security Suite
-
SPI Stateful Packet Inspection Firewall
Blocks SYN flood, ICMP echo storm, UDP/TCP flood and all mainstream DoS/DDoS attack vectors; granular inbound/outbound IP/MAC-based access control lists (ACLs) for precise traffic filtering
-
AI-Driven Application Control & Real-Time Cloud Web Filtering
Identifies and restricts thousands of cloud applications, social media, streaming and P2P services; cloud-backed global URL filtering database covering billions of domains across 85+ content categories to block malicious, phishing and unproductive web content
-
Native Built-In Cisco Umbrella Cloud Security
No extra subscription activation required for baseline DNS-layer threat defense against malware, ransomware and phishing sites with centralized cross-branch threat reporting
-
Hardware-Accelerated Multi-Protocol VPN Security
IPsec tunnels with AES-128/192/256, 3DES encryption, MD5/SHA1/SHA256 authentication and IKEv2 support; native AnyConnect SSL VPN, OpenVPN, L2TP and PPTP remote access tunnels for distributed remote workforce connectivity
-
Administrative Access Hardening
Two-tier privilege model (full admin / read-only guest), mandatory HTTPS encrypted web management, complex password enforcement, local log buffer storage, remote Syslog server export and email alert notifications for security incidents and link outages
-
IP Source Guard
Binds IP addresses to MAC addresses to block internal LAN IP spoofing attacks
Intelligent Multi-Link QoS & Bandwidth Management
-
Port-level 802.1p LAN traffic marking, application-aware WAN bandwidth shaping
-
Four hierarchical traffic queues to prioritize real-time voice/video conferencing above recreational internet traffic
-
Global uplink bandwidth rate limiting to prevent single endpoints from saturating dual fiber/copper WAN circuits
-
Full DSCP marking recognition for consistent end-to-end QoS across multi-site IPsec VPN topologies
-
Per-application bandwidth throttling for high-consumption streaming/P2P traffic
Power, Mechanical & Environmental Specifications
-
Form Factor: Fanless black metal chassis, dual desktop / 19-inch rack-mount design with included rack brackets
-
Physical Dimensions (W × D × H): 250 × 160 × 44 mm
-
Unit weight: 1.1 kg
-
Power supply: External 12VDC / 2.5A AC-DC wall adapter
-
Operating temperature: 0°C ~ 40°C (32°F ~ 104°F)
-
Storage temperature: -20°C ~ 70°C (-4°F ~ 158°F)
-
Operating humidity: 10%–85% non-condensing
-
Storage humidity: 5%–90% non-condensing
-
Compliance Certifications: UL 60950-1, IEC/EN 60950-1, FCC Class A, CE, IC safety & EMC, RoHS environmental standards
-
Warranty: Cisco Limited Lifetime Hardware Protection
Device Management & Deployment Tools
-
Dual Independent Management Interfaces
-
Responsive modern HTTPS web GUI with step-by-step visual setup wizards for rapid zero-training deployment
-
Serial console SSH command-line interface for advanced scripting, diagnostics and bulk configuration editing
-
Discovery & Mass Deployment Protocols
SNMP v3, UPnP, Bonjour mDNS, Cisco FindIT Network Utility for unified visibility of all Cisco SMB network devices on the local LAN; supports remote Plug and Play (PnP) mass deployment for multi-branch enterprise rollouts
-
Configuration & Firmware Operations
Full running-config export/import file backup, firmware upgradable via web upload, USB flash drive or Cisco FindIT cloud platform
Typical Deployment Scenarios
Dual-WAN fiber broadband small/medium office core internet gateway, multi-branch retail IPsec site-to-site VPN router, regional remote field office secure interconnection with dual link redundancy, primary dual GE WAN gateway with USB 4G/5G cellular tertiary backup failover, enterprise remote worker AnyConnect/OpenVPN SSL VPN termination device, small enterprise segregated staff/guest inter-VLAN routing gateway, rack-mount compact branch edge router for centralized telecom closet deployments requiring high VPN throughput and full cloud UTM security.
Note: The RV350 is the latest-generation mainstream SMB Gigabit UTM router with ongoing Cisco firmware security support, designed for small/medium branch fiber/copper broadband deployments and not intended for high-capacity enterprise core or carrier-grade edge backbone environments. It differs from RV350W (wireless dual-band Wi-Fi variant), RV355 (16-port non-PoE high-density LAN model) and RV355P (16-port PoE+ powered variant).
3. E-commerce Short Marketing Description
Cisco RV350 Wired Dual-Gigabit-WAN Next-Gen Small Business UTM VPN Router, fanless rack-mountable/desktop metal chassis with dual independent GE WAN ports for load balancing & auto failover, built-in 4-port managed Gigabit LAN switch, dual USB 3.0 ports for 4G/5G cellular backup failover, RJ45 serial console SSH CLI access, upgraded dedicated hardware crypto acceleration, SPI DoS/DDoS-protection enterprise firewall, dual-stack IPv4/IPv6, up to 100 IPsec site-to-site + 100 AnyConnect SSL remote VPN tunnels plus native OpenVPN support, AI application control & real-time cloud URL web filtering, built-in Cisco Umbrella DNS threat security, 1 Gbps NAT / 800 Mbps IPsec VPN throughput, dual web GUI / SNMP v3 management, Limited Lifetime Hardware Protection, cost-effective high-performance wired multi-link branch gateway for small-medium offices, retail multi-branch and remote business secure broadband & multi-site encrypted VPN connectivity.
4. Product Catalog Keyword Tags
Cisco, RV350, Cisco RV35X Next-Generation Series, Wired Dual-Gigabit-WAN Multi-Service UTM VPN Router, Fanless Rack-Mountable/Desktop Metal Chassis, Dual Independent Gigabit RJ45 WAN Ports (Load Balance / Auto Failover), 4-Port Managed Gigabit LAN Switch, Up to 4094 802.1Q VLANs with Inter-VLAN Routing, Dual USB 3.0 for 4G/5G/LTE Modem Redundancy & Storage, RJ45 Serial Console SSH CLI, Upgraded Dedicated Hardware Encryption Acceleration, SPI Stateful Inspection Firewall, Full DoS/DDoS Attack Prevention, IP Source Guard Anti-Spoofing, Dual-Stack IPv4/IPv6, 100 IPsec Site-to-Site Tunnels (IKEv2/GRE / AWS/Azure Cloud Templates), 100 Cisco AnyConnect SSL Remote VPN Tunnels, Native OpenVPN / L2TP / PPTP Remote Access Support, AES-256 Hardware VPN Offload, AI-Powered Application Traffic Control, Real-Time Dynamic Cloud URL Web Filtering, Built-In Cisco Umbrella Cloud DNS Threat Security, 4-Queue Hierarchical QoS Traffic Prioritization, RSTP / 802.1X Port Security Support, 1 Gbps NAT Throughput, 800 Mbps IPsec VPN Throughput, Cisco FindIT Network Discovery & Remote PnP Mass Deployment, Modern HTTPS Web GUI & SNMP v3 Management, High-Performance Compact Multi-Link Fiber Branch Gateway, Multi-Branch Retail IPsec VPN Router, Cisco Limited Lifetime Hardware Protection
Naming Rule Explanation
-
RV: Cisco RV Series identifier for mid-to-high tier small business wired/wireless multifunction UTM VPN routers
-
350: Base wired-only dual-GE-WAN 4-port LAN rack-mount next-gen model number;
-
RV350W: Wireless dual-band Wi-Fi 6 variant of RV350
-
RV355: High-density 16-port non-PoE wired LAN variant
-
RV355P: 16-port LAN with IEEE 802.3at PoE+ power budget variant
All RV35X family models share identical upgraded routing, security, VPN and firmware feature sets, differing only in LAN port quantity, PoE power delivery and wireless hardware.
|
