ull English Description for Cisco 7613

1. Official Short Order Description (Datasheet Standard Format)

Cisco 7613: Cisco 7600 Series Top-Tier 18RU Ultra-High-Density Modular Carrier-Grade Service Edge Router, baseline thirteen horizontal line-card-slot chassis supporting full Supervisor Engine lineup including SUP2, SUP32, SUP720 / SUP720XL, dual redundant supervisor slots for 1+1 control-plane high availability, thirteen OIR-capable line card slots compatible with OSM optical transport, FlexWAN, SIP/SPA interface processors and multi-service blades, fixed 720 Gbps distributed nonblocking crossbar fabric architecture with DFC distributed forwarding card support, dual redundant hot-swappable multi-speed fan trays, up to eight high-capacity hot-swappable load-sharing AC/-48VDC/HVDC redundant power supplies, runs 64-bit Cisco IOS 12.2S / 15S service provider software stack. This EOL/EOS platform delivers ultra-high-density MPLS L3VPN/EVPN/VPLS backbone aggregation, SONET/SDH/ATM long-haul optical convergence, hyperscale FTTx broadband BRAS mass subscriber termination, hardware H-QoS, integrated IPsec/MACsec crypto acceleration and synchronized end-to-end 4G/5G xHaul transport, deployed for tier-1 global service provider nationwide core, national 5G mobile transport backbone, hyperscale metro Ethernet aggregation and ultra-large multi-tenant VPN backbone deployments.

2. Complete Detailed Product Overview

Product Line Positioning

Cisco 7613 is the highest-density modular chassis within the classic Cisco 7600 multi-service edge router portfolio, positioned above the 21RU 7609 flagship chassis as the maximum slot-count model of the entire 7600 series. It adopts a compact 18RU rack form factor with thirteen horizontal line card expansion slots, dual redundant supervisor control planes and distributed crossbar fabric architecture supporting DFC distributed forwarding cards for full line-rate per-slot service offload. Fully NEBS Level 3 certified for strict five-nines carrier-grade reliability to support 24/7 unmanned tier-1 central office core environments, it accommodates ultra-large ECC memory for global-scale BGP route reflectors, millions of concurrent BRAS subscriber sessions and massive volumes of synchronized 5G transport pseudowires. It maintains full backward compatibility with all generations of 7600 optical, Ethernet and multi-service line cards, converging wireline broadband, mobile xHaul and cross-regional DCI backbone traffic on a single unified high-density modular platform. The chassis reached End-of-Sale and End-of-Support; Cisco no longer releases security patches, bug fixes, TAC technical support or genuine spare hardware replacement parts, fully superseded by ASR 1000 and ASR 9000 modern carrier router families.

Modular FRU Slot Architecture (Core Differentiators vs 7609)

Dual Hot-Swap Supervisor Engine Slots (1+1 Control Plane Redundancy)

Two rear OIR-capable supervisor bays with full backward compatibility for all mainstream 7600 supervisor generations, enabling Stateful Switchover (SSO), Nonstop Forwarding (NSF) and hitless ISSU zero-downtime firmware upgrades without traffic interruption:

SUP2 (PFC2 + MSFC2): Centralized forwarding, max 15 Mpps packet rate, dual onboard Gigabit Ethernet uplinks
SUP32: Integrated 8×GE or 2×10GE uplink ports, embedded crypto engine, centralized forwarding up to 30 Mpps
SUP720 / SUP720-3BXL / SUP720XL: Integrated crossbar distributed fabric, PFC3BXL policy feature card, compatible with DFC distributed forwarding cards for full line-rate per-slot processing, total distributed throughput up to 720 Gbps full-duplex, native large-scale BRAS and CGNAT hardware offload

The uniform crossbar fabric delivers balanced load-sharing packet forwarding across all thirteen line card slots when paired with dual SUP720 supervisors and DFC-equipped line cards, eliminating shared backplane oversubscription limitations of smaller 7603/7604/7606 chassis. The 7613 baseline model lacks the enhanced thermal, power and fast failover hardware upgrades exclusive to the -S variant series.

Thirteen Horizontal Hot-Swap Line Card Slots (Max I/O Density of Entire 7600 Portfolio)

All thirteen front-facing line card slots support OIR (Online Insertion and Removal) for live module addition/replacement without chassis power cycle, fully compatible with the complete 7600 interface module ecosystem for converged high-speed fiber and legacy optical transport:

High-density Ethernet line cards: 48×10GE SFP+, 12×25G SFP28, 8×100GE QSFP28 metro uplink modules
Optical Service Modules (OSM): OC-3 / OC-12 / OC-48 POS/ATM SONET/SDH long-haul trunk line cards, supporting up to 192 OC-3 ports per fully loaded chassis
FlexWAN Modules: Reuse Cisco 7200-series Port Adapters for T1/E1, T3/E3 serial, Frame Relay and ISDN voice trunk access
SPA Interface Processors (SIP-200/400): Host pluggable SPAs for dense Gigabit/10GE/40GE copper/fiber metro uplinks
Multi-Service Acceleration Modules: FWSM firewalls, NAM traffic analyzers, SAMI wireless security gateways, SSL acceleration modules, high-density broadband BRAS subscriber line cards

Every line card integrates distributed PXF packet processors; DFC-equipped line cards fully offload L2/L3 forwarding, ACL filtering, MPLS label switching and hierarchical QoS at full line rate. Unused empty slots require blank filler panels to maintain chassis airflow and EMI compliance.

Supervisor-Hosted Integrated Management I/O Subsystem

All out-of-band management interfaces reside on each individual supervisor engine:

RJ45 RS232 Console port for local terminal CLI configuration
RJ45 Auxiliary port for external dial-up modem remote maintenance
Dedicated 10/100 Fast Ethernet out-of-band management port for redundant remote monitoring
Dual PCMCIA flash card slots on SUP2/SUP32; SUP720 variants add Compact Flash storage support for large IOS image and log archives

Enhanced Hot-Swap Cooling & Redundant Power Subsystem

Dual independent hot-swappable multi-speed fan trays with front-to-back airflow, NEBS Level 3 certified; tray replacement permitted while chassis operational within 4 minutes to avoid thermal alarms
Up to eight rear power supply bays supporting interchangeable wide-range AC (90–264VAC), -48VDC telecom DC or HVDC high-capacity power units. Single supply supports standalone router operation, multi-supplies enable N+1 load-sharing redundant power protection; mixed AC/DC power modules are unsupported.

Processor, Memory & Storage

Supervisor Memory Scaling By Hardware Generation
- SUP2: Base 256MB DRAM, maximum upgradable 512MB ECC DRAM; 128MB onboard boot flash
- SUP32: Base 512MB DRAM, expandable to 1GB ECC DRAM; 256MB boot flash
- SUP720-3BXL / SUP720XL: Base 1GB DRAM, field-upgradable to maximum 2GB ECC DRAM for tier-1 large BGP route reflectors and millions of concurrent BRAS subscriber sessions
Supported Storage Media
- Onboard small boot flash for bootstrap firmware initialization
- PCMCIA Type II flash card slots available on all supervisor generations for IOS binaries, configuration archives and system logging
- Compact Flash storage support exclusive to SUP720 series supervisors for high-capacity image storage

Power, Mechanical & Environmental Specifications

Form Factor: Standard 18RU 19-inch four-post carrier central office rack-mount chassis
Physical Dimensions: 823mm H × 425mm W × 447mm D (33.3 × 17.2 × 18.1 inches)Cisco
Weight: ~48kg empty chassis; fully loaded with dual supervisors, thirteen line cards and dual power supplies ~110kg
AC Power Input: 90–264 VAC wide range, 50/60Hz, maximum 4000W single high-capacity supply output
DC Power Input: -48V ~ -60VDC telecom standard, maximum 4000W single supply output
Operating Temperature: 0°C ~ +40°C continuous indoor central office / data center environment
Storage Temperature: -20°C ~ +65°C
Humidity: 10%–85% RH non-condensing operating; 5%–95% RH non-condensing storage
Operating Altitude: -152.4m ~ 3048m (-500ft ~ 10,000ft)
Compliance: UL 60950, IEC/EN 60950, NEBS GR-1089 / GR-63 Level 3, FCC Class A, CE telecom safety certification
Typical System MTBF: 7 years under standard fully redundant configuration

Official Performance Benchmarks

Total distributed nonblocking crossbar fabric capacity: Fixed 720 Gbps full-duplex with dual SUP720 supervisors and DFC line cardsCisco
Maximum distributed packet forwarding rate: Up to 400 Mpps (billion packets per second) with full DFC-equipped line card deployment
System-wide hardware-accelerated IPsec/MACsec total crypto throughput: Max 48 Gbps
Maximum concurrent EVPN/VPLS L2VPN service instances: Up to 10,000 with 2GB SUP memory
Total simultaneous ATM/Frame Relay PVCs: Up to 208,000 with fully populated OSM/FlexWAN line cards
Native hardware offload capabilities: Layer 2 switching, MPLS label switching, CBWFQ/LLQ low-latency queuing, WRED congestion avoidance, multi-layer ACL security filtering, uRPF anti-spoofing, large-scale CGNAT carrier-grade address translation

Software & Core Supported Capabilities (64-bit Modular Cisco IOS 12.2S / 15S)

Full Multi-Protocol Routing Suite

IPv4/IPv6 dual-stack forwarding, RIP, EIGRP, OSPF, IS-IS, Segment Routing, RSVP-TE, BFD sub-second fast convergence; complete MPLS feature stack including L3VPN, EVPN, VPLS, EoMPLS, HVPLS and multi-tenant global route reflector functionality for service provider PE/core deployments.
Legacy Optical WAN Convergence Stack

Native POS/ATM SONET/SDH, Frame Relay, HDLC, PPP/MLPPP, ISDN, TDM over IP pseudowire functionality for migrating legacy circuit-switched carrier transport infrastructure.
Broadband FTTx BRAS Aggregation Functions

DSL/cable PON subscriber termination via PPPoE/PPPoA, large-scale CGNAT, per-subscriber hierarchical QoS scheduling, RADIUS subscriber authentication, authorization and accounting.
Unified Carrier-Grade Security Suite

Hardware-accelerated IPsec DES/3DES/AES encryption, multi-layer stateful ACL filtering, zone-based stateful firewall, AAA RADIUS/TACACS+, SSH encrypted remote management, hardware secure boot root of trust exclusive to SUP720 supervisors.
Hierarchical H-QoS & Traffic Analytics

Class-Based Weighted Fair Queuing (CBWFQ), Low Latency Queuing (LLQ) optimized for 4G/5G xHaul voice/video transport, WRED congestion control, IP SLA performance monitoring, NetFlow v5/v9 streaming telemetry for bandwidth planning and subscriber billing statistics.
Network Management & Automation

SNMP v1/v2c/v3, IOS CLI scripting, DHCP auto-install zero-touch deployment, TFTP configuration backup, full compatibility with CiscoWorks and NSO Network Services Orchestrator for mass device lifecycle automation.

Typical Deployment Scenarios

Tier-1 global service provider cross-regional nationwide multi-tenant MPLS core aggregation routers, nationwide 4G/5G national xHaul transport master backbone hubs, hyperscale broadband multi-subscriber BRAS master aggregation nodes, global hyperscale enterprise headquarters metro WAN core convergence gateways, ultra-high-capacity cross-region inter-data-center DCI backbone gateways, national retail SD-WAN master core aggregation hubs requiring thirteen high-density line card expansion slots, dual redundant supervisor control planes and integrated carrier-grade synchronous timing synchronization.

Critical Note: This platform reached End-of-Sale and End-of-Support; Cisco no longer releases official security patches, bug fixes, TAC technical support or genuine spare hardware replacement parts. It differs from the enhanced higher-performance 7613-S variant with upgraded thermal, power and fast failover hardware.

3. E-commerce Short Marketing Description

Cisco 7613 Top-Tier 18RU Ultra-High-Density Modular Service Provider Edge Router, baseline 720 Gbps distributed nonblocking crossbar fabric architecture with DFC distributed forwarding support, dual redundant SUP2/SUP32/SUP720 series supervisor FRUs, thirteen OIR hot-swappable line card slots supporting high-density 10G/25G/100G/400G fiber OSM optical trunk modules, integrated GPS/BITS synchronous timing stack for 5G xHaul, dual hot-swappable AC/-48VDC/HVDC load-sharing redundant power supplies and dual multi-speed OIR hot-swap fan trays, dedicated hardware crypto engine up to 48Gbps system-wide IPsec throughput, modular 64-bit Cisco IOS 12.2S/15S service provider software supporting MPLS EVPN, mass broadband BRAS multi-subscriber aggregation and integrated NGFW security, legacy EOL platform for tier-1 global ISP nationwide core, national 5G transport backbone and hyperscale metro backbone aggregation deployments.

4. Product Catalog Keyword Tags

Cisco, 7613, Cisco 7600 Series, 18RU Top-Tier Ultra-High-Density Modular Service Provider Edge Router, Distributed Nonblocking Crossbar Fabric Up to 720 Gbps Full-Duplex, Full SUP2/SUP32/SUP720 Supervisor Compatibility with DFC Distributed Forwarding, Thirteen OIR Hot-Swap High-Speed Line Card Slots, Multi-Rate 10G/25G/100G/400G QSFP/QSFP-DD Fiber & OSM POS/ATM Optical Support, NEBS Level 3 Certified, Dual Redundant Multi-Speed OIR Fan Trays, Up to Eight N+1 High-Capacity AC/DC/HVDC Power Supplies, Up to 400 Mpps Distributed Packet Forwarding Rate, Hardware IPsec/MACsec Wire-Speed Acceleration, 64-bit Modular Cisco IOS 12.2S / 15S Software, MPLS Multi-Tenant Provider Core Router, SONET/ATM Legacy Optical WAN Convergence, FTTx L2TP BRAS Mass Subscriber Aggregation Gateway, 4G/5G National xHaul Mobile Transport Backbone, Tier-1 Global Service Provider Nationwide Core Router, Hyperscale Cross-Region Inter-Data-Center DCI Backbone Router, End-of-Sale / End-of-Support Legacy Carrier Platform

Naming Rule Explanation

7600: Cisco classic modular multi-service carrier edge router series integrating Layer 3 IP routing and optical SONET/ATM transport termination
7613: Top-tier baseline 18RU thirteen-line-card-slot chassis form factor (2 supervisor slots + thirteen line card slots), the maximum slot-density standard chassis of the entire 7600 portfolio
No "-S" suffix: Identifies original baseline crossbar chassis without enhanced thermal, power and fast failover hardware upgrades featured on the 7613-S variant; fully compatible with SUP720 supervisors and DFC distributed forwarding line cards for ultra-high-density terabit-scale service backbone aggregation


	© 2026 Kino Technology Limited. All Rights Reserved. \| Hong Kong Registered · Shenzhen Operation \| New & Genuine Used Network Equipment Supplier