Homepage | Collection | 繁体中文
Product
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
H3C
没有小类
没有小类
没有小类
没有小类
没有小类
没有小类
Contact Us


Company Name:Kino Technology Limited

Website:www.kino86.com

Address :Room 312, Honghua Building, No. 1 Guangyayuan Road, Bantian Street, Longgang District, Shenzhen city, Guangdong Province, China



Contact Person:kiki

Tel :+8613040881925 

E-mail:kiki@szkiki.com

Wechat:+8613040881925

Whatspp: +8613040881925

Teams:kiki@szkiki.com





Products
 Product >> Cisco >> ALL
 
Product_Id:
72010201716
ProductName:
ASR-9001-S
Specification:
Product Notes:
Product Category:
Cisco
 
   Product Description

Full English Description for Cisco ASR 9001-S

1. Official Short Order Description (Datasheet Standard Format)

ASR 9001-S: Cisco ASR 9000 Series Entry-Level Compact 2RU Nonblocking Provider Edge Router powered by integrated single-chip Route Switch Processor (RSP), scalable nonblocking full-duplex fabric capacity starting at 60 Gbps upgradable via software license to 120 Gbps, base 8GB DDR ECC memory (fixed, non-upgradable), 8GB industrial eUSB bootflash storage, licensed fixed 4×10GE SFP+ built-in ports (2 active by default, 2 unlockable via port license), 1 hot-swappable Modular Port Adapter (MPA) expansion slot supporting 1G/10G/40G fiber MPAs, integrated GPS Stratum 1 grandmaster timing + BITS synchronous clock interface, dual hot-swappable redundant AC/DC power supplies and single OIR fan tray, modular carrier-grade Cisco IOS XR operating system with full MPLS L2/L3VPN, Segment Routing, EVPN, mobile backhaul transport, hardware MACsec/IPsec acceleration and H-QoS multi-service support, optimized for small service provider POP PE, 4G/5G compact mobile edge aggregation, low-scale broadband BRAS termination and cost-effective metro Ethernet aggregation deploymentsCisco.

2. Complete Detailed Product Overview

Product Line Positioning

Cisco ASR 9001-S is the cost-optimized entry 2RU model within the ASR 9000 IOS XR carrier router portfolio, positioned below the full-capacity ASR 9001. It shares identical IOS XR software feature parity with all ASR 9000 chassis but cuts hardware cost via reduced baseline throughput, fixed non-upgradable 8GB memory and only one MPA expansion slot (vs two MPAs on ASR 9001). Designed for budget-sensitive edge aggregation sites that require carrier-grade reliability, synchronous mobile transport timing and flexible fiber port expansion without the full scale of the flagship ASR 9001 chassis. It targets small POP multi-tenant PE, compact cell-site mobile aggregation and metro Ethernet access where maximum route table scale and massive VPN termination are not requiredCisco.

Fixed Native Front-Panel Ethernet Ports (License-Activated)

All ports support SyncE, IEEE 1588v2 PTP, hardware MACsec encryption, H-QoS offload and full CEF service-edge NP processing:
  • Total 4 × 10GE SFP+ fixed ports: 2 ports enabled out of factory, additional 2 ports activated by purchasing a port license
    All SFP+ slots accept copper or fiber transceivers for flexible metro and core uplink connectivityCisco.

Single Hot-Swap MPA Modular Expansion Slot (OIR Supported)

One independent field-replaceable MPA bay for pay-as-you-grow high-density fiber port expansion, compatible standard ASR 9000 MPA portfolio:
  • MPA-4×1GE: 4-port Gigabit SFP branch access aggregation
  • MPA-2×10GE / MPA-4×10GE: High-density 10G fiber uplink modules
  • MPA-1×40GE: Single 40G QSFP uplink for medium-capacity aggregation
    All MPA ports inherit full distributed NP offload for NAT, firewall, AVC DPI and multicast replicationCisco.

Integrated Multi-Standard Precision Timing Subsystem (Mobile Transport Critical)

  • 1 × GPS GNSS input port for Stratum 1 grandmaster clock generation
  • 1 × BITS RJ45 timing port compliant with GR-1244-CORE Stratum 3 carrier synchronization
    Native full support for SyncE, IEEE 1588v2 PTP telecom profiles, ToD and 1PPS pulse signals to eliminate clock drift for synchronous 4G/5G fronthaul/backhaul transport networksCisco.

Management & Auxiliary Interfaces

  • 1×10/100/1000BASE-T RJ45 isolated out-of-band management Ethernet port
  • Dual console access: RJ45 serial console + Mini-USB Type B local configuration port
  • 2×USB 2.0 Type-A host ports for license upload, offline config backup and IOS XR firmware transfer
  • Front-panel multi-color LED array monitoring RSP health, MPA link status, power supply, fan tray, timing lock and minor/major critical fault alarmsCisco.

Processor, Memory & Storage

  1. Integrated Fixed RSP Route Switch Processor (Single FRU)
    Quad-core x86 CPU with dual embedded service-edge network processors for wire-speed distributed service offload across all fixed and MPA ports. Fabric capacity tiered via software license: base 60 Gbps, upgradeable to maximum 120 Gbps full-duplex nonblocking IMIX throughput. Embedded dedicated crypto co-processor delivers hardware MACsec and IPsec VPN acceleration.
    • Fixed factory memory: 8GB ECC DDR RAM (no field memory upgrade option), suitable for medium-scale BGP route reflectors and thousands of concurrent mobile transport pseudowiresCisco.
  2. Boot Storage: 8GB rugged industrial eUSB bootflash for IOS XR modular images, crash dumps, NVRAM and persistent system logging; no internal HDD/SSD mass storage tray supported.

Power, Mechanical & Environmental Specifications

  • Form Factor: Standard 2RU 19-inch four-post rack-mount chassis
  • Physical Dimensions: 88.2mm H × 442mm W × 470mm D (3.47 × 17.42 × 18.5 in)
  • Weight: 13.7kg empty chassis; fully loaded with MPA modules ~16.5kg
  • Cooling: Single hot-swappable OIR fan tray with side-to-side airflow, zero-downtime fan replacement without chassis power down
  • Power Supply Architecture: Dual hot-swappable wide-range AC/DC/HVDC power supplies (1+1 carrier-grade N+1 HA redundancy); typical power draw 375W, maximum 425W
  • Operating Temperature: 0°C ~ +40°C continuous indoor central office / equipment room operation
  • Storage Temperature: -40°C ~ +70°C
  • Humidity: 10%–90% RH non-condensing operating humidity
  • Compliance: UL 62368-1, IEC 60950-1, NEBS GR-1089 / GR-63, FCC Class A, CE certified for carrier central office and enterprise edge deploymentCisco.

Official Performance Benchmarks

  • Scalable aggregate IMIX forwarding throughput: 60 Gbps base, up to 120 Gbps full performance license
  • Hardware-accelerated IMIX IPsec/MACsec total throughput: Up to 12 Gbps
  • Maximum concurrent EVPN/VPLS L2VPN service instances: Up to 5,000 with 8GB fixed memory
  • Concurrent stateful firewall sessions: Up to 1 million sessions
  • Full hardware offload support for NBAR2 AVC deep packet inspection, hierarchical MQC H-QoS, large-scale CGNAT address translation and multicast replication.

Software & Core Supported Capabilities (Modular Cisco IOS XR)

  1. Carrier-Grade Routing & Complete MPLS Suite
    Full IPv4/IPv6 dual-stack forwarding, BGP, OSPF, EIGRP, IS-IS, Segment Routing, BFD sub-second fast convergence; complete MPLS feature stack including L3VPN, EVPN, VPLS, EoMPLS and L2TP broadband BRAS multi-subscriber termination for service provider multi-tenant transport architectures.
  2. 4G/5G Mobile Backhaul Convergence Transport
    Native SyncE / IEEE 1588v2 PTP / GPS/BITS synchronous timing stack, Carrier Ethernet service delivery, SAToP/CESoP TDM pseudowire legacy circuit migration, zero-touch provisioning compatible with Cisco NSO orchestration for mass cell-site deployment.
  3. Unified Integrated Carrier-Grade Security Stack
    Line-rate hardware MACsec/IPsec tunnel encryption, next-generation stateful zone firewall, IDS/IPS threat inspection, advanced malware protection (AMP), large-scale CGNAT subscriber address translation, AAA RADIUS/TACACS+, TLS encrypted remote multi-tenant traffic segmentation.
  4. Application Visibility & Hierarchical H-QoS Management
    NBAR2 full application signature classification, multi-level hierarchical MQC traffic shaping/policing, IP SLA performance monitoring, NetFlow/IPFIX streaming telemetry for centralized metro and mobile transport network capacity analytics.
  5. Carrier-Grade High Availability Mechanisms
    NSF Nonstop Forwarding, SSO Stateful Switchover, ISSU In-Service Software Upgrade for zero-downtime firmware updates, HSRP/VRRP gateway redundancy, dual redundant power/fan trays eliminating single points of failure for unmanned remote POP and cell-site deployments.
  6. Multi-Tenant Automation & Programmability
    CLI/SSH console access, REST API, NETCONF/YANG data models, streaming telemetry, native integration with Cisco NSO Network Services Orchestrator for mass enterprise and service provider edge device lifecycle automation.

Typical Deployment Scenarios

Cost-sensitive small service provider POP multi-tenant PE aggregation CPE, compact 4G/5G mobile regional edge backhaul gateways, low-volume broadband BRAS multi-subscriber termination nodes, medium enterprise metro Ethernet access aggregation routers, small-scale retail SD-WAN regional aggregation hubs requiring 2RU compact rack space, dual redundant power/fan hardware HA and integrated carrier-grade synchronous timing synchronization without the higher cost and larger expansion capacity of full ASR 9001.

3. E-commerce Short Marketing Description

Cisco ASR 9001-S Cost-Optimized 2RU Provider Edge Router, integrated RSP with scalable 60–120Gbps licensed fabric throughput, fixed 8GB ECC DDR memory, 8GB eUSB bootflash, license-unlockable 4×10GE SFP+ built-in ports, single hot-swappable MPA expansion slot for 1G/10G/40G fiber adapters, integrated GPS/BITS/PTP/SyncE multi-layer timing subsystem, dual redundant AC/DC power supplies and single OIR fan tray, modular Cisco IOS XR OS with full carrier-grade MPLS EVPN, mobile backhaul transport and integrated NGFW security, ideal for small service provider POP PE, compact 4G/5G mobile edge aggregation and budget metro Ethernet access deployments.

4. Product Catalog Keyword Tags

Cisco, ASR 9001-S, ASR 9000 Series, 2RU Cost-Optimized Entry Provider Edge Router, Scalable 60–120 Gbps Nonblocking Fabric Throughput, License-Activated 4×10GE SFP+ Fixed Ports, Single Hot-Swap MPA Modular Port Adapter Slot, Integrated GPS Stratum 1 + BITS/PTP/SyncE Timing, Dual Redundant AC/DC Power Supplies, OIR Hot-Swap Fan Tray, Fixed 8GB ECC DDR Memory, NEBS GR-1089 Certified, Hardware MACsec/IPsec Wire-Speed Acceleration, Cisco IOS XR Modular Operating System, Carrier-Grade MPLS L3VPN/EVPN/VPLS, 4G/5G Compact Mobile Backhaul Gateway, Small Service Provider POP PE CPE, Budget Metro Ethernet Aggregation Router, Low-Scale Broadband BRAS Node

Naming Rule Explanation

  • ASR = Aggregation Services Router carrier-grade IOS XR multi-service edge aggregation platform
  • 9000 = High-performance IOS XR carrier core series (separated from IOS XE ASR 900 shallow cell-site transport routers)
  • 9001 = Standard 2RU compact chassis form factor
  • S = Simplified cost-optimized entry variant (single MPA slot, fixed non-upgradable 8GB memory, lower baseline 60Gbps throughput vs full-capacity ASR 9001 with dual MPAs and expandable memory)
Click:12 Entry Time:2026-07-20 【Print】 【Close
 © 2026 Kino Technology Limited. All Rights Reserved. | Hong Kong Registered · Shenzhen Operation | New & Genuine Used Network Equipment Supplier 
Links:   白云搜搜   |   未来互联   |   百度   |  
Kino Technology Limited   网站技术支持:未来互联