Full English Description for Cisco ASR 1006-X

1. Official Short Order Description (Cisco Datasheet Standard Format)

ASR 1006-X: Cisco ASR 1000 Series Next-Generation Flagship 6RU High-Density Modular Aggregation Services Router built on Quantum Flow Processor 3.0, dual redundant RP3 Route Processor slots for SSO high availability, dual ESP forwarding slots supporting ESP100-X / ESP200-X up to 200 Gbps total system throughput, two MIP100 modular interface processor carriers each supporting dual EPA Ethernet Port Adapters for high-density 1G/10G/40G/100G fiber uplinks, backward compatible with legacy SPA/SIP modules, built-in BITS Stratum 3 timing clock, up to six hot-swappable AC/DC/HVDC power supplies with N+1 redundancy, dual redundant fan trays, RP3 base 16GB ECC DDR4 memory upgradable to 32GB, 32GB industrial eUSB bootflash with optional internal SSD mass storage, dedicated hardware crypto delivering up to 86 Gbps wire-speed IPsec acceleration, modular Cisco IOS XE OS with full carrier-grade MPLS, Catalyst SD-WAN/IWAN, NGFW security and broadband BRAS multi-tenant aggregation capabilities, designed for enterprise headquarters core WAN aggregation, service provider central POP multi-tenant BRAS, national SD-WAN hub, large-scale data center DCI interconnection and massive VPN termination deployments.

2. Complete Detailed Product Overview

Product Line Positioning

Cisco ASR 1006-X is the upgraded high-performance flagship 6RU modular chassis of ASR 1000 Series, replacing legacy ASR 1006 base model. It adopts modern QFP3 data-plane architecture, supports dual redundant ESP forwarding modules (unique to large X-series chassis), upgraded RP3 x86 route processors with larger ECC memory, new MIP100/EPA high-density 10G/40G/100G fiber interface carriers while retaining backward compatibility with traditional SPA/SIP trunk modules. It delivers far higher forwarding throughput, encryption capacity and interface scalability than the original ASR 1006, targeting mission-critical core aggregation sites requiring full triple redundancy (control plane, forwarding plane, power), high-speed fiber uplinks and carrier-grade broadband multi-subscriber termination.

Modular FRU Slot Architecture (Core Differentiators vs Legacy ASR 1006)

Dual RP3 Route Processor Slots (1+1 Redundant)

Two independent FRU slots for primary/backup RP3 control modules, supporting Stateful Switchover (SSO), Nonstop Forwarding (NSF) and zero-downtime ISSU firmware upgrades without traffic interruption. RP3 uses Intel Xeon D industrial CPU with ECC DDR4 memory, optimized for large BGP routing tables, thousands of concurrent SD-WAN tunnels and massive NAT/firewall sessions.
Dual ESP Forwarding Plane Slots (Exclusive X-series HA Feature)

Supports dual hot-swappable ESP100-X (100 Gbps) or ESP200-X (200 Gbps) forwarding modules for 1+1 data-plane redundancy, all built on Quantum Flow Processor 3.0 with integrated dedicated crypto co-processors for wire-speed IPsec, MACsec and DMVPN acceleration.
Two MIP100 Modular Interface Processor Carriers (High-Speed Fiber Expansion)

Each MIP100 carrier accepts two hot-swappable EPA Ethernet Port Adapters for high-density modern fiber connectivity:
- EPA-18X1GE: 18×1GE SFP
- EPA-10X10GE: 10×10GE SFP+
- EPA-2X40GE / EPA-1X40GE: 40GE QSFP
- EPA-QSFP-1X100GE: Single 100GE QSFP28 uplink
Backward-Compatible SPA/SIP Support

Retains compatibility with legacy SIP trays and full SPA portfolio for hybrid modern high-speed fiber + traditional T1/E1, T3, OC-3/OC-12 POS trunk convergence.

Fixed Timing & Management Auxiliary Interfaces

1× BITS RJ45 timing interface compliant with GR-1244-CORE Stratum 3 clock standard for carrier central office and substation synchronization
1×10/100/1000BASE-T RJ45 out-of-band management Ethernet port for isolated remote chassis monitoring
Dual console access: RJ45 serial console + Mini-USB Type B console port for local offline configuration
1×RJ45 AUX dial-out port for backup analog modem out-of-band management
2×USB 3.0 Type-A host ports for license import, offline configuration backup and firmware image upload
Multi-color front-panel LED array monitoring RP status, ESP health, power supply, fan trays, MIP/EPA/SPA link activity, timing lock, crypto engine and system fault alarms

Processor, Memory & Storage

RP3 Route Processor Control Plane (Dual Redundant Slots)

Quad-core Intel Xeon D x86 CPU with ECC-protected DDR4 memory:
- Base factory configuration: 16GB RAM per RP, supports up to 2 million IPv4/IPv6 routing table entries
- Field-upgradable to 32GB RAM per RP, supports ultra-large carrier BGP route reflectors, 10,000+ concurrent SD-WAN tunnels and millions of firewall/NAT sessions
Boot Flash: Fixed 32GB rugged industrial eUSB internal flash for IOS XE modular system images, NVRAM and base system logging
Expandable Mass Storage: Optional hot-swappable industrial SATA SSD tray for offline crash dump archiving, long-term NetFlow/IPFIX telemetry retention and persistent edge log storage

Power, Mechanical & Environmental Specifications

Form Factor: Standard 6RU 19-inch four-post data center rack-mount chassis
Dimensions: 222mm H × 445mm W × 521mm D (8.73 × 17.5 × 20.5 in)
Weight: ~20.4kg empty chassis; fully loaded with all modules ~45kg
Cooling: Dual hot-swappable redundant fan trays with front-to-back airflow, OIR-supported zero-downtime fan replacement
Power Supply Architecture: Up to six hot-swappable wide-range AC/DC/HVDC power supplies supporting N+1 carrier-grade redundancy; max total chassis power draw 2400W
Thermal Performance: Continuous operating temperature 5°C ~ +40°C; storage temperature -40°C ~ +70°C
Humidity: 10%–85% RH non-condensing operating humidity
Compliance: UL 62368-1, IEC/EN 60950-1, NEBS GR-1089 / GR-63, FCC Class A, CE certified for carrier central office and enterprise core data center deployment

Official Performance Benchmarks

Scalable aggregate IMIX forwarding throughput: 100 Gbps (single ESP100-X) / 200 Gbps (single ESP200-X)
Hardware-accelerated IMIX IPsec VPN throughput: Max 86 Gbps
Maximum concurrent SD-WAN SVTI/DMVPN overlay tunnels: Up to 10,000 tunnels with 32GB RP memory
Total concurrent stateful firewall sessions: Up to 6 million sessions
Full hardware offload support for NBAR2 AVC deep packet inspection, hierarchical MQC QoS, stateful NAT, MACsec link encryption and multicast replication

Software & Core Supported Capabilities (Modular IOS XE)

Carrier-Grade Routing & Full MPLS Suite

IPv4/IPv6 dual-stack forwarding, BGP, OSPF, EIGRP, IS-IS, Segment Routing, BFD fast convergence; complete MPLS feature stack including L3VPN, VPLS, EoMPLS, multi-tenant route reflector and broadband L2TP BRAS termination for service provider multi-tenant private WAN architectures.
Enterprise & Carrier Catalyst SD-WAN / IWAN Hybrid Multi-WAN Convergence

Full modern SD-WAN feature parity with Catalyst 8000 edge routers, zero-touch provisioning via vManage orchestrator, application-aware multi-path routing, multi-hybrid wired/wireless WAN aggregation, native integration with Cisco Umbrella SASE cloud security and ThousandEyes end-to-end full-path network monitoring.
Unified Integrated NGFW Industrial & Carrier Security Stack

Line-rate hardware VPN/MACsec acceleration, next-generation stateful zone firewall, IDS/IPS threat inspection, advanced malware protection (AMP), CGNAT carrier-grade large-scale address translation, AAA RADIUS/TACACS+, TLS encrypted remote management and IT/OT traffic segmentation.
Application Visibility & Hierarchical QoS Management

NBAR2 full application signature recognition, hierarchical MQC traffic shaping/policing, IP SLA performance monitoring, NetFlow/IPFIX streaming telemetry for centralized traffic analytics and capacity planning for broadband aggregation networks.
Enterprise & Carrier High Availability Mechanisms (Enhanced Dual RP + Dual ESP)

NSF Nonstop Forwarding, SSO Stateful Switchover between primary/backup RP modules, dual ESP data-plane redundancy, ISSU In-Service Software Upgrade for zero-downtime firmware updates, HSRP/VRRP/GLBP gateway redundancy, sub-second BFD failure detection for fast WAN convergence.
Multi-Tenant Automation & Programmability

CLI/SSH console access, REST API, NETCONF/YANG data models, streaming telemetry, native integration with Catalyst Center and NSO Network Services Orchestrator for mass enterprise and multi-tenant service provider lifecycle automation.

Typical Deployment Scenarios

Enterprise headquarters core WAN aggregation hubs, national retail SD-WAN central core gateways, service provider central POP multi-tenant BRAS aggregation nodes, large-scale oil & gas private WAN core routers, solar/wind renewable energy central control room gateways, large data center DCI interconnection routers requiring dual RP/dual ESP full redundancy, high-density 10G/40G/100G fiber uplinks and large offline telemetry storage capacity.

3. E-commerce Short Marketing Description

Cisco ASR 1006-X Next-Generation Flagship 6RU Modular Aggregation Services Router, dual redundant RP3 + dual ESP forwarding slots scalable up to 200Gbps throughput, RP3 with 16GB ECC DDR4 RAM upgradable to 32GB, 32GB eUSB bootflash + optional SSD mass storage, two MIP100 carriers supporting high-density EPA 1G/10G/40G/100G fiber adapters plus legacy SPA/SIP compatibility, built-in BITS Stratum 3 timing clock, up to six N+1 redundant PSU & dual fan trays, dedicated crypto engine up to 86Gbps IPsec throughput, modular IOS XE OS with full MPLS, Catalyst SD-WAN IWAN and integrated NGFW security, ideal for enterprise headquarters core, service provider central POP BRAS and large-scale multi-tenant broadband aggregation deployments.

4. Product Catalog Keyword Tags

Cisco, ASR 1006-X, ASR 1000 Series, 6RU Next-Generation Flagship Modular Aggregation Router, Dual Redundant RP + Dual ESP Slots, QFP3 Quantum Flow Processor, Up to 200 Gbps System Throughput, MIP100 + EPA High-Density Fiber Expansion, Backward SPA/SIP Compatibility, BITS Stratum 3 Timing Clock, Optional SSD Mass Storage, N+1 Redundant Multi-PSU Design, NEBS GR-1089 Certified, 86 Gbps Wire-Speed IPsec Acceleration, IOS XE Modular Operating System, Carrier-Grade MPLS L3VPN, Catalyst SD-WAN / IWAN Support, Broadband BRAS Multi-Tenant Aggregation Gateway, Enterprise Headquarters WAN Core Router

Naming Rule Explanation

ASR = Aggregation Services Router carrier/enterprise multi-service modular WAN aggregation platform
1006 = 6RU large modular chassis form factor
X = Next-gen upgraded high-performance variant (RP3 control plane, dual ESP redundancy, QFP3 forwarding ASIC, MIP/EPA high-density 100G fiber expansion, larger memory/storage, superior crypto throughput vs legacy base ASR 1006)


	© 2026 Kino Technology Limited. All Rights Reserved. \| Hong Kong Registered · Shenzhen Operation \| New & Genuine Used Network Equipment Supplier