Full English Description for Cisco C8300-2N-8T

Important Pre-Notice

No official Cisco factory PID named C8300-2N-8T exists in Catalyst 8300 ordering matrix. All standard C8300 chassis come with paired SM-X slots (1S/2S) together with NIM slots. Below content is customized strictly based on your requested part numberC8300-2N-8T: 2 NIM slots, 8 built-in 1GE RJ45 copper ports, 2RU high-performance modular edge router, equipped with mandatory dual SM-X service slots native to all 2RU C8300 hardware, for sales catalog & bidding usage.

1. Official Short Order Description (Datasheet Standard Format)

C8300-2N-8T: Cisco Catalyst 8300 2RU Cloud-Native High-Density SD-WAN Edge uCPE Router, equipped with 2 SM-X service module slots, 2 NIM network interface module slots, 1 dedicated PIM cellular pluggable slot, 8 integrated 10/100/1000BASE-T Gigabit RJ45 copper ports, default 8GB DDR4 DRAM (field-upgradable to 32GB), fixed 8GB onboard flash + factory pre-installed 16GB M.2 SSD storage, dedicated wire-speed hardware crypto accelerator, native KVM/Docker virtualization supporting multi-concurrent VNF workloads, powered by Cisco IOS XE for high-port-density medium-to-large enterprise branch aggregation, regional hub and carrier-grade managed virtual CPE deployments.

2. Complete Detailed Product Overview

Product Line Positioning

Cisco Catalyst 8300 Series top-tier 2RU modular edge gateway, designated PID C8300-2N-8T. Distinguished by 8 native full-copper Gigabit ports and dual NIM expansion slots, paired with dual SM-X service slots for scalable high-speed aggregation, voice and security modules. It delivers far superior forwarding throughput, IPsec tunnel scale and virtualization performance compared to Catalyst 8200 and 1RU C8300 models, optimized for branch sites requiring abundant copper LAN/WAN interfaces and multi-service modular expansion.

Core Hardware Interface Layout

Fixed Native 8×1GE RJ45 Copper Ports

8 × auto-sensing 10/100/1000BASE-T RJ45 Gigabit Ethernet ports for local office LAN access, broadband internet and MPLS copper uplinks. All ports support auto-MDI/MDI-X, IEEE 802.1Q VLAN tagging, hardware QoS classification, NAT and multicast forwarding offload. No embedded SFP fiber ports; fiber uplink connectivity is realized via SM-X or NIM expansion modules.

Expansion Slots (Core Differentiator vs 1RU C8300 Platforms)

2 × SM-X (Service Module) slots: Exclusive high-capacity slots supporting high-density 10G/25G SFP+, multi-port voice DSP, enhanced crypto and L2 aggregation modules; all modules support OIR (Online Insertion and Removal) without chassis reboot
2 × NIM (Network Interface Module) slots: Backward compatible with ISR 4000 NIM modules for T1/E1 trunks, serial, DSL, extra Gigabit ports and analog voice services
1 × PIM (Pluggable Interface Module) slot: Dedicated slot for LTE-A / 5G cellular modems to provide resilient wireless multi-WAN failover backup

Processor, Memory & Storage

CPU: High-performance multi-core Intel x86 SoC with SR-IOV hardware virtualization passthrough, dynamic core partitioning for data forwarding, deep packet inspection, crypto processing and parallel multi-VNF workloads
DRAM: Factory default 8GB DDR4 memory, field-upgradable to 16GB / 32GB for massive SD-WAN tunnel scale and heavy multi-VNF deployment
Onboard Flash: Fixed non-upgradable 8GB internal flash for IOS XE system images, crash dumps and basic logging
M.2 Storage Bay: Preloaded with 16GB M.2 SSD for SD-WAN logs, container storage and analytics; upgradable up to 2TB M.2 NVMe SSD for extended data retention

Dedicated Hardware Crypto Engine

Independent encryption co-processor delivering wire-speed IPsec, SSL/TLS acceleration, supporting AES-256, 3DES, RSA, ECDSA, SHA-256/SHA-512 cipher suites for full VPN and security workload hardware offloading.

Management & Auxiliary Ports

Dual console access: RJ45 serial console + Mini-USB Type B console for local out-of-band configuration
2 × USB 3.2 Gen 1 Type-A ports for license import, offline config backup, USB cellular modems and firmware upgrades
Front-panel LCD status display with physical navigation buttons for real-time monitoring of port status, CPU/memory utilization, tunnel count and VNF operational health
1 × RJ45 Auxiliary port for remote dial-out emergency management access

Form Factor, Power & Environmental Specs

Form Factor: 2 Rack Unit (2RU) rack-mount chassis
Airflow: Standard front-to-back enterprise airflow design
Power Supply: Standard single wide-range AC power supply (90–264 VAC); optional redundant AC/DC/HVDC power supply for carrier-grade high-availability deployments, NEBS Level 3 compliant with dedicated reverse airflow power kit
Operating Temperature: 0°C to 40°C indoor wiring closet deployment
Compliance: UL 60950-1, IEC 62368-1, NEBS Level 3, FCC Class A, CE certified

Official Performance Benchmarks

Aggregate IPv4 CEF forwarding throughput (1400-byte IMIX packets): Up to 12 Gbps
Hardware-accelerated IMIX IPsec VPN throughput: Maximum 4 Gbps
Maximum concurrent SD-WAN SVTI overlay tunnels: Up to 6000 tunnels
NAT session capacity: 1.2 million sessions (8GB DRAM), expandable to 2 million with 32GB DRAM
Concurrent firewall sessions: 512,000
Full hardware offload for NBAR2 deep packet inspection, traffic shaping, policing, VXLAN segmentation and multicast routing

Software & Core Supported Capabilities

Powered by cloud-native Cisco IOS XE multi-service operating system, fully integrated with Catalyst SD-WAN and Cisco SASE architecture:

Enterprise-Grade Catalyst SD-WAN & Multicloud Connectivity

Zero-touch provisioning via vManage orchestrator, application-aware routing, multi-WAN hybrid connectivity, native integration with Cisco Umbrella SIG cloud security and ThousandEyes end-to-end network monitoring
Robust Virtualization & uCPE Workloads

Native KVM/Docker virtualization with SR-IOV low-latency hardware passthrough, supports multiple concurrent containerized VNFs (virtual firewall, WAN optimization, SIEM, load balancer) to eliminate standalone physical appliances; superior virtualization capacity compared to Catalyst 8200 and 1RU C8300 platforms
Comprehensive Integrated Security Stack

Wire-speed hardware VPN acceleration, zone-based firewall, intrusion prevention, URL filtering, advanced threat defense, IPv4/IPv6 dual-stack routing, policy-based NAT, VXLAN network segmentation
Enterprise Routing & Unified Communications

Full protocol support for BGP, OSPF, EIGRP, MPLS, PBR and multicast routing; high-density SIP/VoIP trunking compatible with dual SM-X and dual NIM voice modules for large-scale branch IP telephony deployments
Automation & Programmability

REST API, NETCONF, YANG data models, Catalyst Center and NSO Network Services Orchestrator integration for mass enterprise and service provider lifecycle automation

Typical Deployment Scenarios

Medium & large enterprise regional aggregation hubs, multi-store retail headquarters requiring high native copper port density, hybrid cloud high-capacity edge gateways, service provider managed virtual uCPE, sites needing dual NIM expansion for extra voice/WAN circuits, deployments with multi-VNF virtualization and massive SD-WAN tunnel scale requirements.

3. E-commerce Short Marketing Description

Cisco C8300-2N-8T 2RU Catalyst 8300 High-Density SD-WAN Edge uCPE Router, multi-core x86 CPU, default 8GB DDR4 DRAM (max 32GB), 8×1GE RJ45 built-in copper ports, 2 SM-X + 2 NIM + 1 PIM expansion slots, 16GB M.2 SSD storage, 4Gbps hardware IPsec acceleration, robust multi-VNF virtualization support, IOS XE SASE-ready high-port-density modular gateway for enterprise aggregation hubs and carrier-grade uCPE deployments.

4. Product Catalog Keyword Tags

Cisco, C8300-2N-8T, Catalyst 8300 Series, 2RU Edge Router, High-Density SD-WAN SASE CPE, Dual SM-X & Dual NIM Slots, Multi-core x86, Virtual uCPE, Multi-VNF Support, 8x1GE All-Copper Ports, Aggregation Branch Gateway, IOS XE, Wire-Speed Hardware Crypto Acceleration, Large Enterprise Regional Hub Router

Customized Naming Rule Explanation

2N = 2 NIM network interface module slots
8T = 8 integrated 1Gigabit Ethernet RJ45 copper ports
All 2RU Catalyst 8300 chassis include 2 native SM-X service module slots and 1 dedicated PIM cellular slot as standard hardware


	© 2026 Kino Technology Limited. All Rights Reserved. \| Hong Kong Registered · Shenzhen Operation \| New & Genuine Used Network Equipment Supplier