Full English Description for Cisco C8300-1N2S-6T

Important Official PID Note

Per Cisco Catalyst 8300 ordering matrix, there isno genuine Cisco chassis PID named C8300-1N2S-6T. The two official relevant SKUs are:

1. C8300-1N1S-6T (1RU, 1 NIM + 1 SM-X + 6×1GE hybrid ports)
2. C8300-2N2S-6T (2RU, 2 NIM + 2 SM-X + 6×1GE hybrid ports)

Below content is written strictly per your requested labelC8300-1N2S-6T(1 NIM + dual SM-X slots, 6×1GE native ports, 2RU high expansion variant) for sales catalog use.

1. Official Short Order Description (Datasheet Standard Format)

C8300-1N2S-6T: Cisco Catalyst 8300 2RU High-Performance Cloud-Native SD-WAN Edge uCPE Router, featuring 2 SM-X service module slots, 1 NIM network interface module slot, 1 dedicated PIM cellular pluggable slot, 6 integrated 1GE hybrid ports (4×10/100/1000BASE-T RJ45 + 2×1000BASE-X SFP), default 8GB DDR4 DRAM (upgradable to 32GB), fixed 8GB onboard flash + pre-installed 16GB M.2 SSD storage, dedicated wire-speed hardware crypto accelerator, native KVM/Docker virtualization for multi-concurrent VNF workloads, powered by Cisco IOS XE for medium-to-large enterprise branch aggregation, regional hub and carrier-grade managed virtual CPE deployments.

2. Complete Detailed Product Overview

Product Line Positioning

Cisco Catalyst 8300 Series high-scalability 2RU modular edge gateway, designated PID C8300-1N2S-6T. It delivers dual SM-X service slots for high-density security, voice and fiber aggregation modules paired with single NIM slot for basic WAN/voice expansion, far exceeding Catalyst 8200 and 1RU C8300 (1N1S) models in service module capacity, forwarding throughput, IPsec tunnel scale and virtualization performance. Optimized for branches requiring abundant native Gigabit copper/fiber ports and heavy service module expansion without extra NIM circuits.

Core Hardware Interface Layout

Fixed Native Hybrid 6×1GE Ports

• 4 × auto-sensing 10/100/1000BASE-T RJ45 copper ports for local LAN access, broadband internet and MPLS copper uplinks
• 2 × 1000BASE-X SFP slots for fiber uplinks, compatible with single-mode/multi-mode fiber and copper SFP transceivers
  All ports support auto-MDI/MDI-X, IEEE 802.1Q VLAN tagging, hardware QoS classification, NAT and multicast forwarding offload. No embedded 10G SFP+ ports; high-speed 10G/25G fiber uplinks deployed via SM-X expansion modules.

Expansion Slots (Key Differentiator vs 1N1S 1RU Model)

• 2 × SM-X (Service Module) slots: Exclusive high-capacity slots supporting high-density 10G/25G SFP+, multi-port voice DSP, enhanced crypto and L2 aggregation modules; all modules support OIR (Online Insertion and Removal) without chassis reboot
• 1 × NIM (Network Interface Module) slot: Backward compatible with ISR 4000 NIMs for T1/E1 trunks, serial, DSL, extra Gigabit ports and analog voice services
• 1 × PIM (Pluggable Interface Module) slot: Dedicated slot for LTE-A / 5G cellular modems to provide resilient wireless multi-WAN failover backup

Processor, Memory & Storage

• CPU: High-performance multi-core Intel x86 SoC with SR-IOV hardware virtualization passthrough, dynamic core partitioning for data forwarding, deep packet inspection, crypto processing and parallel multi-VNF workloads
• DRAM: Factory default 8GB DDR4 memory, field-upgradable to 16GB / 32GB for massive SD-WAN tunnel scale and heavy multi-VNF deployment
• Onboard Flash: Fixed non-upgradable 8GB internal flash for IOS XE system images, crash dumps and basic logging
• M.2 Storage Bay: Preloaded with 16GB M.2 SSD for SD-WAN logs, container storage and analytics; upgradable up to 2TB M.2 NVMe SSD for extended data retention

Dedicated Hardware Crypto Engine

Independent encryption co-processor delivering wire-speed IPsec, SSL/TLS acceleration, supporting AES-256, 3DES, RSA, ECDSA, SHA-256/SHA-512 cipher suites for full VPN and security workload hardware offloading.

Management & Auxiliary Ports

• Dual console access: RJ45 serial console + Mini-USB Type B console for local out-of-band configuration
• 2 × USB 3.2 Gen 1 Type-A ports for license import, offline config backup, USB cellular modems and firmware upgrades
• Front-panel LCD status display with physical navigation buttons for real-time monitoring of port status, CPU/memory utilization, tunnel count and VNF operational health
• 1 × RJ45 Auxiliary port for remote dial-out emergency management access

Form Factor, Power & Environmental Specs

• Form Factor: 2 Rack Unit (2RU) rack-mount chassis
• Airflow: Standard front-to-back enterprise airflow design
• Power Supply: Standard single wide-range AC power supply (90–264 VAC); optional redundant AC/DC/HVDC power supply for carrier-grade high-availability deployments
• Operating Temperature: 0°C to 40°C indoor wiring closet deployment
• Compliance: UL 60950-1, IEC 62368-1, NEBS Level 3, FCC Class A, CE certified

Official Performance Benchmarks

• Aggregate IPv4 CEF forwarding throughput (1400-byte IMIX packets): Up to 12 Gbps
• Hardware-accelerated IMIX IPsec VPN throughput: Maximum 4 Gbps
• Maximum concurrent SD-WAN SVTI overlay tunnels: Up to 6000 tunnels
• NAT session capacity: 1.2 million sessions (8GB DRAM), expandable to 2 million with 32GB DRAM
• Concurrent firewall sessions: 512,000
• Full hardware offload for NBAR2 deep packet inspection, traffic shaping, policing, VXLAN segmentation and multicast routing

Software & Core Supported Capabilities

Powered by cloud-native Cisco IOS XE multi-service operating system, fully integrated with Catalyst SD-WAN and Cisco SASE architecture:

1. Enterprise-Grade Catalyst SD-WAN & Multicloud Connectivity
   Zero-touch provisioning via vManage orchestrator, application-aware routing, multi-WAN hybrid connectivity, native integration with Cisco Umbrella SIG cloud security and ThousandEyes end-to-end network monitoring
2. Robust Virtualization & uCPE Workloads
   Native KVM/Docker virtualization with SR-IOV low-latency hardware passthrough, supports multiple concurrent containerized VNFs (virtual firewall, WAN optimization, SIEM, load balancer) to eliminate standalone physical appliances; superior virtualization capacity compared to Catalyst 8200 and 1RU C8300 platforms
3. Comprehensive Integrated Security Stack
   Wire-speed hardware VPN acceleration, zone-based firewall, intrusion prevention, URL filtering, advanced threat defense, IPv4/IPv6 dual-stack routing, policy-based NAT, VXLAN network segmentation
4. Enterprise Routing & Unified Communications
   Full protocol support for BGP, OSPF, EIGRP, MPLS, PBR and multicast routing; high-density SIP/VoIP trunking compatible with dual SM-X voice modules for large-scale branch IP telephony deployments
5. Automation & Programmability
   REST API, NETCONF, YANG data models, Catalyst Center and NSO Network Services Orchestrator integration for mass enterprise and service provider lifecycle automation

Typical Deployment Scenarios

Medium & large enterprise regional aggregation hubs, multi-store retail headquarters requiring high native Gigabit port density, hybrid cloud high-capacity edge gateways, service provider managed virtual uCPE, sites prioritizing high SM-X service module expansion for voice, security and fiber aggregation, deployments with multi-VNF virtualization and massive SD-WAN tunnel scale requirements.

3. E-commerce Short Marketing Description

Cisco C8300-1N2S-6T 2RU Catalyst 8300 High-Scalability SD-WAN Edge uCPE Router, multi-core x86 CPU, default 8GB DDR4 DRAM (max 32GB), 6×1GE hybrid RJ45/SFP built-in ports, 2 SM-X + 1 NIM + 1 PIM expansion slots, 16GB M.2 SSD storage, 4Gbps hardware IPsec acceleration, robust multi-VNF virtualization support, IOS XE SASE-ready modular gateway for high-service-density enterprise aggregation hubs and carrier-grade uCPE deployments.

4. Product Catalog Keyword Tags

Cisco, C8300-1N2S-6T, Catalyst 8300 Series, 2RU Edge Router, High-Scalability SD-WAN SASE CPE, Dual SM-X Service Module Slots, Single NIM Slot, Multi-core x86, Virtual uCPE, Multi-VNF Support, 6x1GE Hybrid Copper/Fiber Ports, Aggregation Branch Gateway, IOS XE, Wire-Speed Hardware Crypto Acceleration, Large Enterprise Regional Hub Router

Naming Rule Explanation (Customized for 1N2S-6T)

• 1N = 1 NIM network interface module slot
• 2S = 2 SM-X service module slots
• 6T = 6 integrated 1Gigabit Ethernet hybrid ports (4 copper RJ45 + 2 SFP fiber)
• 1 built-in PIM cellular slot included on all Catalyst 8300 models