Cisco 3925E Integrated Services Router Full Product Description

1. Short Overview

Naming & Variant Breakdown

• CISCO3925E/K9: Standard AC-powered base router with IP Base universal IOS image and embedded K9 AES/3DES crypto hardware
• CISCO3925E-AC-IP/K9: AC PoE variant with integrated inline power distribution for 802.3af IP phones via switch EHWICs
• CISCO3925E-DC/K9: 24–60V negative DC telecom-grade power model for central office cabinet deployments
• -SEC/K9: Pre-bundled Advanced Security license with zone firewall, IOS IPS, full IPsec/SSL/DMVPN enabled
• -VOICE/K9: Unified Communications bundle pre-licensed for CME/SRST embedded voice call processing
• -VSEC/K9: All-in-one integrated Voice + Security converged branch bundle
• -AX/K9: Advanced services bundle supporting SRE virtualization, WAAS wide-area optimization
• -HSEC/K9: High-security bundle factory optimized for massive concurrent IPsec tunnels, FIPS 140-2 Level 2 compliant with optional security shield kit

Core Differentiators vs Cisco 3925 (Standard Non-E Model)

1. SPE200 modular performance engine(SPE100 on base 3925): Higher multi-core CPU clock, larger crypto offload capacity, wire-speed 160 Mbps aggregate throughput vs 150 Mbps for 3925Cisco
2. Default DRAM upgraded to 1GB dual symmetric DIMMs (512MB default on standard 3925), same max 2GB DRAM ceiling
3. Optimized system bus for multi-port aggregated T1/E1/xDSL uplinks and hundreds of concurrent VoIP calls
4. Identical physical chassis, expansion slot layout, port configuration, power supply options, dual redundant internal power support, 3U rack form factor
5. Same slot count: 1 double-wide SM-D / 2 single-wide SM slots, 4 universal EHWIC slots, 4 onboard PVDM3 DSP slots, 1 internal ISM service module slot, 4 onboard Gigabit Ethernet (3 RJ45 GE + 2 independent SFP fiber ports)
6. Dual USB 2.0 ports, triple out-of-band management consoles, removable CompactFlash storage, native RPS connector

2. Hardware Interface & Physical Specifications

Modular Expansion Architecture

1. 1 × Double-Wide SM-D / 2 × Single-Wide SM Service Module slots
   Rear high-density service slots supporting enterprise-grade trunk, security, storage, and virtualization modules:

• SM-2T1/SM-4E1 multi-port channelized T1/E1 PRI voice trunk modules for large PBX interconnection
• NM-CIDS-K9 dedicated inline intrusion detection modules
• SRE900 virtualization modules for Windows/Linux application hosting, WAAS bandwidth deduplication
• SM-CUE storage modules for Unity Express voice mail, auto-attendant and local log retention

1. 4 × Rear Universal EHWIC/WIC/VIC/VWIC slots
   Supports single-wide EHWIC, double-wide EHWIC-D, legacy HWIC, analog VIC, multi-flex VWIC voice cards; two slots accept double-wide high-bandwidth EHWIC-D modules:

• EHWIC: ADSL2+, VDSL2, G.SHDSL, synchronous serial, 4-port GE switch EHWICs
• WIC: ISDN BRI, synchronous/asynchronous serial, analog modem WICs for Dial-on-Demand Routing (DDR) backup failover
• VIC/VWIC: FXS/FXO/E&M analog station/trunk cards, fractional T1/E1 multi-flex voice trunks

1. 4 × Motherboard PVDM3 DSP slots
   Dedicated onboard Packet Voice Digital Signal Processor slots to handle VoIP codecs, G.168 echo cancellation, wideband G.722 audio, T.38 fax relay, and multi-party audio conferencing without consuming external expansion slots; quadruple DSP capacity supports up to 384 concurrent VoIP calls for large IP phone deployments.
2. 1 × Internal ISM (Internal Service Module) auxiliary slot
   For supplementary storage, lightweight crypto acceleration, or auxiliary application offloading to complement SM service modules.

Fixed Built-in Rear Panel Ports

1. 4 × Auto-MDI-X 10/100/1000BASE-T Gigabit Ethernet (3 GE RJ45 + 2 independent SFP mini-GBIC fiber slots)
   Two native independent SFP fiber uplinks with no port sharing limitation; all Gigabit ports fully support IEEE 802.1Q VLAN trunking, inter-VLAN routing, LACP link aggregation to isolate corporate, finance, engineering, guest, and sensitive POS payment subnetsCisco.
2. RJ45 Serial Console port (115.2 kbps max baud) – primary local out-of-band CLI management
3. Mini-USB Type-B Console port – lightweight secondary local management without RJ45 cables
4. RJ45 AUX port – remote emergency IT access via external PSTN analog modem
5. 2 × USB 2.0 Type-A ports– high-speed offline configuration/log backup storage, two-factor crypto authentication tokens
6. Removable external CompactFlash (CF) slot – primary persistent storage for IOS universal images, full running configurations, persistent event logging
7. Dual internal hot-swappable power supply bays (AC / DC / PoE variants available)
8. Dedicated external RPS redundant power supply connector for extended fault tolerance
9. Chassis ground lug + Kensington anti-theft lock slot for physical rack security

Memory & Performance Benchmarks

• Processor: Multi-task PowerQUICC CPU integrated on field-replaceable SPE200 Services Performance Engine, with dedicated embedded hardware crypto FPGA accelerationCisco
• Default DRAM: 1024MB (1GB) symmetric dual 512MB ECC DIMMs; maximum expandable DRAM: 2048MB (2GB) via matching dual DIMM slots
• Default Flash memory: 256MB CompactFlash; maximum supported Flash: 4GB CF card
• Multi-service mixed voice/data/security throughput: Up to 160 Mbps aggregate wire-speed performance (higher than standard 3925)
• Hardware crypto acceleration: Native AES-256, 3DES, DES IPsec, SSL/TLS, GRE VPN offloading; scalable via SM high-security modules for hundreds of concurrent site-to-site tunnels
• Maximum concurrent site-to-site IPsec tunnels: Up to 450+, expandable with full 2GB DRAM and dual SM encryption hardware
• Supported IOS releases: Cisco IOS 15.0(1)M through 15.7(3)M universal multi-service maintenance images; feature functions unlocked via permanent chassis-bound software licenses (SL-39-DATA-K9, SL-39-SEC-K9, SL-39-UC-K9)
• Voice capacity: PVDM2/PVDM3 DSP modules support up to 384 concurrent VoIP calls; Cisco CME embedded call processing for up to 300 IP phones, SRST survivable remote telephony, Unity Express voice mail for up to 1000 mailboxes hosted via SM-CUE storage modules

Physical & Power Parameters

• Form factor: 3U standard 19-inch rack-mount metal chassis with integrated rack ears
• Standard AC power supply: 100–240V 47–63Hz universal autoranging internal power supply, dual hot-swappable internal PSUs for native redundancy
• DC variant (C3925E-DC): 24–60V negative DC telecom input for central office cabinet deployments
• PoE variant (C3925E-AC-IP): Integrated inline power distribution delivering up to 360W PoE budget, expandable with external PoE boost accessories
• Typical chassis power consumption: ~650W under fully loaded dual SM, four EHWIC, four PVDM, ISM module configuration
• Front panel status LEDs: System power, dual PSU fault alarm, CompactFlash activity, dual USB port status, PVDM/ISM health indicators, four EHWIC slot link/activity, dual SM slot status, four Gigabit Ethernet + dual SFP link/activity
• Operating environment
  • Operating temperature: 0°C to +40°C below 1800m altitude; 0°C to +25°C above 1800m up to 3000m
  • Relative humidity: 5–85% RH non-condensing
• Dimensions (H × W × D): 133.35 × 438.15 × 476.25 mm (5.25 × 17.25 × 18.75 inches)Cisco
• Fully loaded weight: ~14.3 kg (31.5 lbs) with complete expansion modules
• No native chassis PoE output except for dedicated -AC-IP power supply variant.

3. Cisco IOS Universal Image Multiservice Feature Suite

Core Routing & Multi-WAN Connectivity

• Full dual-stack IPv4 / IPv6 routing suite: Static routes, RIP v1/v2, OSPF, EIGRP, BGP, IS-IS, PIM multicast suite, BFD bidirectional forwarding detection
• WAN encapsulation support: PPP, HDLC, Frame Relay, ATM, ISDN, PPPoE/PPPoA for DSL, Dial-on-Demand Routing (DDR) for automatic backup failover, MPLS L2/L3 VPN, GETVPN
• HSRP/VRRP for router high availability redundancy; NHRP DMVPN hub-spoke multi-site overlay VPN architecture
• NAT services: Static NAT, dynamic NAT, PAT overloading, multi-address NAT pools, NAT64 IPv4-IPv6 transition support
• IEEE 802.1Q VLAN trunking, inter-VLAN routing, storm control, LACP link aggregation across four onboard Gigabit Ethernet ports and dual independent SFP fiber uplinks.

Unified Communications Voice & Fax Integration

1. VoIP signaling protocols: H.323, SIP, MGCP, SCCP native support for large-scale Cisco Unified IP Phone deployments
2. Analog/digital telephony via VIC/VWIC + four PVDM3 DSPs + dual SM voice trunk modules: FXS station ports, FXO PSTN trunk lines, E&M PBX tie connections, multi-port T1/E1 PRI channelized trunk interworking with third-party PBX platforms
3. T.38 real-time fax relay over IP, fax passthrough, store-and-forward fax routing
4. DSP-accelerated voice codecs: G.711, G.719, G.729a, G.726, wideband G.722 high-fidelity audio, video conferencing codec support
5. Enterprise telephony tools: Scalable multi-site dial plans, voice hunt groups, toll bypass to eliminate expensive long-distance PSTN charges
6. CME embedded call manager, SRST survivable remote telephony, Unity Express voice mail/auto-attendant hosted via SM-CUE storage modules.

Enterprise QoS & WAN Optimization

• Base QoS tools: Weighted Fair Queuing (WFQ), CBWFQ, per-interface traffic shaping
• Advanced QoS (Data/UC license): Low Latency Queuing (LLQ), Frame Relay Traffic Shaping (FRTS), WRED congestion avoidance, DSCP/802.1p traffic marking
• Link Fragmentation and Interleaving (LFI), cRTP VoIP header compression to eliminate voice jitter over low-speed DSL/ISDN backup links
• NBAR2 next-generation deep packet inspection for application-aware traffic prioritization of business-critical software; SRE WAAS module for end-to-end WAN bandwidth deduplication and optimization.

Integrated Self-Defending Network Security Suite

1. Zone-Based Stateful Firewall (ZBFW): Deep application-layer inspection for HTTP, FTP, SIP, H.323 and all mainstream enterprise business protocols
2. IOS IPS inline signature-based intrusion prevention with real-time threat detection and automated connection blocking
3. Embedded hardware-accelerated VPN stack:
   • AES-256/3DES/DES IPsec site-to-site branch tunnels
   • Cisco Easy VPN Remote centralized security policy provisioning for remote branch locations
   • DMVPN scalable hub-spoke multi-site overlay networks
   • SSL VPN for browser-only remote worker access without client software
4. AAA security framework: PAP/CHAP authentication, RADIUS/TACACS+ centralized access control and complete audit logging
5. Standard/extended ACLs, dynamic ACLs, anti-DDoS traffic policing, security zone segmentation to isolate sensitive POS payment and finance subnets
6. FIPS 140-2 Level 2 certified with optional physical security shield kit for government regulated deployments.

Management, Automation & Operations

• Triple out-of-band management interfaces: RJ45 Serial Console, Mini-USB Console, and AUX modem port for emergency offline IT maintenance
• Secure remote management: SSHv2, HTTPS, SNMP v1/v2c/v3, TR-069 automated remote provisioning
• Graphical configuration utility: Cisco Configuration Professional (CCP) for simplified zero-touch mass branch deployment
• AutoInstall automated remote IOS image and configuration download over WAN links for nationwide branch rollouts
• Removable CompactFlash storage for easy IOS upgrades, configuration backup, and centralized log archiving
• Persistent syslog event logging, NTP time synchronization for consistent audit log timestamps
• Dual USB 2.0 ports for offline config storage and two-factor authentication security tokens
• Cisco EnergyWise power management for intelligent energy consumption control of attached network devices.

4. Typical Deployment Scenarios

1. Large regional enterprise headquarters multi-service edge gateway: Multiple aggregated T1/E1 PRI voice trunks via SM-D double-wide service module, dual fiber Metro Ethernet primary/secondary WAN uplinks via independent SFP slots, VDSL2 EHWIC copper backup link, four PVDM3 DSP modules supporting over 350 concurrent VoIP calls, four Gigabit Ethernet ports to segregate finance, engineering, staff, and guest VLANs, SRE900 virtualization module for local application hosting, high-volume DMVPN IPsec tunnels to corporate headquarters, integrated ZBFW/IPS security stack for enterprise compliance.
2. National multi-chain retail flagship voice gateway: ADSL2+ EHWIC primary broadband WAN, ISDN BRI WIC dial backup, CME embedded call processing for 200–300 on-site IP phones, SM-CIDS intrusion detection module for PCI DSS payment security, SM-CUE voice mail storage module for multi-location unified messaging.
3. Global carrier managed high-capacity enterprise CPE: Universal dual-standard DSL EHWIC copper broadband access, DC power variant for central office rack deployment, dual SM storage/optimization modules for tenant log retention and bandwidth control, DMVPN overlay to carrier central service hub, integrated firewall/IPS for tenant threat isolation and network segmentation.
4. Advanced enterprise networking high-density training lab core router: Universal SM-D/EHWIC/WIC/VIC modularity to teach multi-port T1/E1 PRI voice trunking, dual independent fiber SFP uplinks, quadruple DSP VoIP gateway, hardware-accelerated high-volume IPsec VPN, and full unified communications gateway labs; factory 1GB DRAM and large CF capacity fully support feature-rich IOS 15.xM images unavailable on standard 3925 and all lower-tier 2800 series routers.

5. Standard Package Contents of CISCO3925E / 3925E-DC / 3925E-AC-IP

Separately Sold Optional Accessories

• EHWIC/WIC/VIC/VWIC WAN and analog/digital voice interface cards
• SM / SM-D double-wide service modules (multi-T1/E1 trunk, IDS, SRE virtualization, Unity Express storage)
• PVDM2/PVDM3 DSP voice compression modules for VoIP, wideband audio and T.38 fax relay
• DRAM memory expansion DIMMs (512MB / 1GB / 2GB symmetric matched pairs)
• CompactFlash memory upgrades (256MB / 1GB / 4GB)
• CAT5e/CAT6 Gigabit Ethernet patch cords, RJ11 DSL/ISDN telephone line cables
• External PoE injectors for non-PoE IP cameras and wireless access points
• External redundant power supply units (RPS) for high-availability branch deployments
• FIPS physical security shield kit for FIPS 140-2 Level 2 certification
• Spare C3900-SPE200/K9 performance engine replacementCisco

Software Licensing Information

1. SL-39-DATA-K9: Core routing, dual-stack IPv6, MPLS, advanced QoS, NBAR2 application classification, EnergyWise power management
2. SL-39-SEC-K9: Zone-based stateful firewall, IOS inline IPS, full AES/3DES IPsec/SSL/DMVPN encryption, advanced threat mitigation, anti-DDoS policing
3. SL-39-UC-K9: CME/SRST embedded voice call processing, Unity Express voice mail, full wideband VoIP codec support for PVDM3 DSP modules
   Embedded K9 crypto hardware complies with US ITAR export regulations for global shipments.

Short Commercial Catalog Summary