Cisco C1169-12P Full Product Description

1. Short Overview

Suffix Breakdown

• C1169: Flagship modular triple-media hybrid DSL-fiber fixed ISR chassis of Cisco 116x series, integrated universal dual-standard VDSL2/ADSL2+/G.FAST DSL modem (Annex A/M + Annex B/J) + dual independent combo fiber-copper Ethernet WANs + dedicated front pluggable cellular NIM slot for swappable 4G/5G modules, flagship crypto throughput across 116x portfolio
• NoX: Base memory variant equipped with 4 GB DRAM + 4 GB flash (X-suffix C1169X-12P upgrades to 8GB DRAM/8GB flash with native IOx edge application hosting for local IoT analytics and offline M2M workloads)
• 12: Integrated 12-port full Gigabit copper LAN switch (high-density variant vs 4-port / 8-port 116x models)
• P: Full PoE power distribution on all 12 LAN ports: 8× IEEE 802.3af PoE (15.4W) + 4× IEEE 802.3at PoE+ (30W), total shared PoE power budget of 240W

Core Differentiators

1. vs non-modular universal DSL model C1168-12P: C1168-12P only supports wireless backup via external USB LTE dongles; C1169-12P features a built-in NIM expansion slot for pluggable 4G LTE / 5G cellular modules, offering stable, carrier-grade modular cellular WAN without occupied USB ports.
2. vs analog POTS-only Annex A/M DSL C1167-12P: C1167-12P is limited to Annex A/M analog POTS DSL; C1169-12P integrates dual-standard DSL hardware compatible with both Annex A/M analog telephone lines and Annex B/J ISDN digital circuits for global mixed carrier infrastructure.
3. vs ISDN-only Annex B/J DSL C1166-12P: C1166-12P only supports Annex B/J ISDN DSL; C1169-12P works with both POTS and ISDN copper lines, unifying global carrier DSL deployments under a single SKU.
4. vs pure dual-combo Ethernet modular C1161-12PLTEP: C1161-12PLTEP has no built-in DSL chipset for copper telephone line broadband; C1169-12P adds universal dual-standard DSL for hybrid copper-fiber access networks.
5. vs wireless variant C1169-12PWE: Wireless variants integrate internal dual-band 802.11ax Wi-Fi 6 WLAN AP hardware; C1169-12P omits built-in wireless access point functionality, focusing on wired and cellular WAN aggregation.
6. vs legacy ISR G2 C880 DSL routers: Older DSL ISRs run classic IOS without native SD-WAN, limited crypto acceleration, lack dual combo SFP fiber uplinks, have low PoE port density, and only support USB cellular backup; C1169-12P adopts modern multi-core IOS XE architecture with dedicated hardware VPN offloading delivering up to 825 Mbps IPsec encrypted throughput and modular cellular NIM expansion.

2. Hardware Interface & Performance Specifications

Four Independent Multi-Media WAN Architecture (Automatic Four-Path Failover Supported)

1. Primary Combo Gigabit Ethernet WAN Port 0 (GE0/0/0)
   10/100/1000BASE-T RJ45 copper interface paired with a shared SFP slot supporting industry-standard 1G fiber transceivers (SX/LX/T). Auto MDI/MDI-X speed negotiation enables flexible fiber or copper high-bandwidth primary Metro Ethernet broadband access for large regional branch voice, video, and data workloads.
2. Secondary Independent Combo Gigabit Ethernet WAN Port 1 (GE0/0/1)
   Separate dedicated 10/100/1000BASE-T RJ45 copper interface paired with a second standalone SFP slot for redundant fiber/copper backup uplink. Fully compatible with VRRP, HSRP, MHSRP, and continuous IP SLA link health monitoring to trigger automatic SD-WAN policy-based traffic steering and failover across two independent multi-media Ethernet WAN paths.
3. Integrated Multi-Standard Universal DSL WAN Port
   Built-in ITU-compliant dual-standard DSL modem supporting complete G.FAST, VDSL2, and ADSL2/2+ profiles for both Annex A/M analog POTS and Annex B/J ISDN telephone circuits:

• G.FAST: 106a / 106b full spectrum
• VDSL2: 8a/8b/12a/17a/35b with vectoring support
• ADSL2/2+ Annex A / Annex M analog POTS; Annex B / Annex J ISDN digital lines
  Includes dying gasp power detection and comprehensive onboard DSL diagnostic toolkit for signal attenuation, noise margin, crosstalk, and error rate monitoring, acting as tertiary wired backup broadband uplink over existing copper telephone lines of any global carrier standard.

1. Dedicated NIM Cellular Expansion Slot (Modular 4G LTE / 5G)
   Front-accessible pluggable NIM slot supporting Cisco LTE-Advanced Pro and 5G SA/NSA cellular modules (sold separately). Provides permanent, stable quaternary wireless WAN uplink without consuming the USB port, enabling four-layer primary/secondary/tertiary/fallback multi-media failover across dual fiber/copper Ethernet, universal DSL, and modular cellular networks via IP SLA link health detection and SD-WAN policy-based traffic steering.
2. USB 3.0 Type-A Port for Auxiliary Storage / Secondary USB LTE Dongle
   Retained USB 3.0 port for offline configuration storage, log archiving, or secondary USB cellular backup as an extra redundant wireless path, independent of the modular NIM cellular uplink.

12-Port Full Gigabit Managed LAN Switch

• Ports 1–8: IEEE 802.3af PoE (max 15.4W per port for standard IP cameras, single-line VoIP phones, low-power indoor Wi-Fi access points)
• Ports 9–12: IEEE 802.3at PoE+ (max 30W per port for high-power 4K PTZ surveillance cameras, multi-line enterprise Wi-Fi 6 APs, and video intercom endpoints)
  All 12 ports support simultaneous PoE delivery with total shared PoE power budget of 240W, eliminating dozens of separate external PoE injectors for large-scale unified communications and campus-wide multi-camera surveillance deployments.
  Full enterprise Layer 2 switching feature set:
• 802.1Q VLAN tagging, port isolation, static MAC address security, dedicated DMZ port assignment
• Broadcast/multicast storm suppression, SPAN traffic mirroring, LACP link aggregation, Cisco Auto Smartport auto-provisioning macros
• Per-port CoS traffic marking, bandwidth policing, private VLAN segmentation, CDP device discovery

Management & Auxiliary Ports

1. Micro-USB Console port: Dedicated out-of-band local CLI access via Micro-USB cable for offline factory provisioning and on-site troubleshooting
2. Single USB 3.0 Type-A dual-purpose host port: Supports external flash drives for offline configuration backups, system log archiving, EEM automation scripts, and Zero-Touch Provisioning (ZTP) image deployment; also compatible with optional CAT4/CAT6 USB LTE dongles for secondary auxiliary wireless backup WAN
3. External DC power input jack (requires separate 12V DC 240W universal AC power adapter to sustain full 240W PoE load; no internal integrated PSU)
4. Hardware reset button, Kensington anti-theft lock slot for physical equipment protection
5. Embedded RTC real-time clock for precise timestamping of security audit logs, digital certificate validity, and network fault events

Memory, Storage & Performance Benchmarks

• DRAM: 4 GB fixed non-upgradeable system memory, supports up to 100 concurrent IPsec/DMVPN tunnels, four-path SD-WAN multi-path forwarding, inline NGIPS inspection, and full 12-port PoE LAN + four-media WAN traffic processing under maximum full load
• Flash storage: 4 GB onboard non-upgradeable flash; factory preloadedc900-universalk9-mzIOS XE Universal Advanced Security image, minimum supported firmware release 16.11.1
• Maximum IPsec encrypted IMIX throughput (multi-tunnel): 825 Mbps (flagship performance of the entire 116x series)
• Unencrypted raw IPv4 IMIX routing throughput: Up to 1 Gbps
• Concurrent site-to-site IPsec/DMVPN tunnels: Up to 100
• Concurrent remote SSL VPN users: Up to 100

Front Panel LED Status Indicators

Physical & Power Parameters

• Form factor: Slim fanless metal desktop chassis, optional wall-mount bracket and ACS-1100-RM2 19-inch rack-mount kit available
• Dimensions (H × W × D): 41.9 mm × 322 mm × 12.7 × 8.9 inches) with anti-slip rubber feet
• Weight: ~1.78 kg (3.92 lbs) without external power adapter, SFP transceivers, cellular NIM modules, and USB LTE dongles
• Power supply requirement: Separate external 12V DC 240W universal AC adapter (100–240V AC mains input, 50/60Hz)
• Typical maximum power consumption: 36 W under dual combo Ethernet WAN + DSL WAN + plugged-in cellular NIM + USB LTE dongle + full 240W PoE LAN load
• Ingress protection: IP20, designed exclusively for dry indoor commercial office and central telco wiring closet environments

Standard Commercial Environmental Specifications

• Operating temperature: 0°C ~ +40°C (32°F ~ 104°F); linear performance derating of 1.5°C per 1000 m altitude above 3000 m
• Storage temperature: -40°C ~ +70°C (-40°F ~ 158°F)
• Relative humidity: 10%–85% RH non-condensing
• Maximum operating altitude: 3,000 m (10,000 ft)

3. Hardware Acceleration & Security Engine

• Dedicated onboard crypto co-processor fully offloads IPsec, IKEv2, and SSL VPN encryption traffic, eliminating CPU bottlenecks under heavy concurrent site-to-site and remote access tunnel workloads
• Permanent integrated universal security license enables complete enterprise encryption suite: AES-128/192/256, 3DES, DES, SHA-1/SHA-2, IKEv1/IKEv2 static tunnels, Easy VPN remote access, and DMVPN dynamic hub-spoke tunnels
• Native traffic isolation filters to segregate corporate staff LAN, PoE camera/VoIP IoT subnet, and untrusted public internet via independent VLAN zoning to block lateral threat movement across dual Ethernet, DSL, modular cellular, and USB cellular uplink paths
• Embedded Cisco Umbrella cloud security and Encrypted Traffic Analytics (ETA) for advanced threat detection over public DSL, fiber, and cellular wireless broadband networks

4. Cisco IOS XE Advanced Security & SD-WAN Feature Suite

Four Hybrid WAN Redundancy Routing (Dual Combo Fiber-Copper Ethernet + Integrated Universal DSL Annex A/M+B/J + Modular NIM Cellular + Optional USB LTE Cellular)

• Cisco Express Forwarding (CEF), static routing, RIPv1/v2, OSPF, EIGRP, BGP, GRE/MGRE tunnel encapsulation, complete IPv4/IPv6 dual-stack routing support
• Automatic policy-based four-path failover logic across dual independent combo fiber/copper Ethernet WAN ports, integrated universal DSL secondary uplink, modular NIM cellular tertiary wireless backup, and USB LTE quaternary backup via VRRP and continuous IP SLA circuit health validation
• Metro Ethernet 802.3ah E-LMI link fault monitoring for fiber/copper carrier SLA tracking; complete built-in DSL line diagnostic toolkit for signal attenuation, noise margin, vectoring, and error rate monitoring for both POTS and ISDN copper lines
• Policy-Based Routing (PBR), multi-NAT pools, PAT overload for logical segmentation of mixed PoE-powered surveillance and voice endpoints
• DHCP server/relay/client, DNS proxy, dynamic DNS, IP SLA active link performance monitoring across all four independent WAN media

Unified Enterprise Threat Security Suite

• Zone-Based Stateful Inspection Firewall (ZBFW) to isolate internal corporate LAN, PoE device subnet, DMZ, and untrusted public internet traffic zones with granular inter-zone access control policies
• Next-Generation Intrusion Prevention System (NGIPS), Cisco Umbrella cloud URL filtering, deep NBAR2 advanced application control for HTTP, FTP, IM, video conferencing, and mainstream business workloads
• AAA authentication via TACACS+ / RADIUS, 802.1X port authentication supported on all twelve Gigabit LAN ports
• Secure management only: SSHv2, HTTPS, SNMPv3; plaintext Telnet disabled by factory default
• Granular access control lists (ACLs), static MAC address port lockdown on Gigabit switch ports, anti-spoofing and DDoS mitigation filters for inbound WAN traffic over dual Ethernet, DSL, modular cellular, and USB cellular uplinks

SD-WAN & Multi-Layer QoS Bandwidth Optimization

• Native Cisco SD-WAN integrated functionality for intelligent application-aware traffic steering across four independent fiber/DSL/cellular hybrid paths, with application-defined SLA policy enforcement for critical voice, multi-stream video surveillance, and POS payment workloads
• WFQ, CBWFQ, LLQ low-latency queuing mechanisms for priority forwarding of real-time industrial SCADA, voice, and multi-camera video traffic over metered DSL and cellular data plans
• NBAR2 deep packet inspection to classify and prioritize bandwidth-heavy business workloads (inter-site data replication, bulk video backhaul, enterprise cloud synchronization)
• RTP/TCP header compression, traffic shaping, and policing to strictly control M2M, retail, and enterprise bandwidth consumption and avoid carrier billing overage charges
• PoE QoS scheduling to guarantee consistent power and bandwidth priority for mission-critical PoE+ 4K cameras and multi-line VoIP handsets across all twelve powered LAN ports

Remote Management & Automation

• Cisco Zero-Touch Provisioning (ZTP) for mass standardized deployment of large retail flagship locations, regional medium enterprise branches, and dual-standard DSL/G.FAST telco-managed high-port modular cellular hybrid access CPE
• Cisco IOS Embedded Event Manager (EEM): Scriptable triggers for dual combo Ethernet/DSL/NIM cellular/USB LTE WAN link loss, DSL sync failure, PoE power faults, and USB storage events with email/SNMP alert notifications for remote IT and telco operations staff
• SNMP v2c/v3, remote syslog logging, IP SLA end-to-end link performance telemetry, dedicated MIB extensions for four-media WAN circuit status, DSL line quality, cellular signal strength, and PoE power consumption monitoring
• Compatible with Cisco Configuration Professional (CCP), Cisco DNA Center Lite, and vManage SD-WAN controller for unified single-pane-of-glass remote monitoring of routing, security, PoE, and multi-media four-WAN subsystems
• GOLD non-disruptive onboard diagnostics for continuous remote hardware health checks of dual combo SFP Ethernet, integrated universal DSL modem, cellular NIM slot, and PoE switching interfaces without service interruption

5. Typical Deployment Scenarios

1. Global Dual-Standard DSL/G.FAST Telco Four-Redundant Hybrid Fiber-DSL Modular Cellular Large Retail PoE Secure Gateway
   Two independent combo SFP/RJ45 WAN ports deliver dual redundant fiber/copper Metro Ethernet primary and secondary uplinks for large retail POS transaction, multi-floor 4K surveillance video, and multi-line voice traffic backhaul. Integrated universal dual-standard DSL port acts as automatic tertiary backup over either analog POTS or ISDN copper telephone lines during fiber cut outages; front pluggable NIM cellular module provides dedicated quaternary wireless cellular connectivity during simultaneous dual fiber and DSL outages, with optional USB LTE dongle as fifth fallback wireless path. Integrated 12-port full PoE/PoE+ LAN switch powers dozens of POS payment terminals, high-power PoE+ PTZ security cameras, multi-line VoIP desk phones, and multi-floor Wi-Fi 6 APs without dozens of separate external PoE injectors. VLAN segmentation isolates sensitive payment infrastructure from staff LAN and public internet threats. Persistent encrypted IPsec DMVPN/SD-WAN tunnels transmit retail video and transaction data securely back to central corporate data centers, with zone firewall + NGIPS mitigating external cyber intrusion risks over fiber, DSL, and cellular public networks.
2. Global DSL Service Provider Premium Modular Hybrid Fiber-Copper-Cellular Multi-Standard Enterprise CPE
   Uniform flagship high-performance compact hardware platform for global DSL carriers operating mixed POTS and ISDN copper infrastructure to deliver four-layer redundant dual-fiber-DSL-modular-cellular managed broadband services to large enterprise subscribers requiring high-density 12-port PoE surveillance and multi-phone voice endpoints plus dedicated modular wireless emergency backup. Centralized ZTP mass deployment and remote SNMP/vManage monitoring support bundled security, full PoE, and SD-WAN networking service packages for premium large SME market segments with mixed legacy copper infrastructure.
3. Small-Medium Regional Enterprise Office Four-Redundant SD-WAN Branch Router
   Four hybrid WAN design allows dual fiber combo Ethernet primary/secondary broadband for stable encrypted Easy VPN/SD-WAN connectivity to corporate headquarters; universal DSL copper line provides low-cost tertiary backup compatible with both POTS and ISDN wiring, and front pluggable NIM cellular module delivers emergency wireless quaternary failover for suburban/rural regional locations prone to frequent fixed-line circuit outages. Full 12-port PoE/PoE+ LAN powers office high-power surveillance cameras, dozens of multi-line VoIP phones, and multiple wireless access points, full EIGRP/BGP routing support enables seamless intelligent multi-path traffic steering to core enterprise networks.
4. Multi-Building Campus Central High-Density IoT Surveillance PoE Edge Router
   Twelve LAN ports connect dozens of high-resolution PoE/PoE+ cameras, building access control sensors, and environmental monitoring equipment across multiple campus buildings; primary combo fiber WAN delivers high-bandwidth backhaul to campus core network, secondary universal DSL uplink acts as wired backup for both POTS and ISDN campus copper, modular NIM cellular provides emergency wireless third-path connectivity during simultaneous dual fiber and copper circuit failures, and USB LTE dongle offers fifth backup wireless link, automatic SD-WAN multi-path steering maintains uninterrupted multi-stream video and sensor data transmission.
5. Distributed Remote Industrial M2M Converged Voice & Video Hybrid Router
   Fanless low-noise compact design fits semi-indoor central wiring closets at large remote industrial sites with mixed POTS/ISDN legacy copper lines; four independent media WAN paths eliminate single/double points of failure for mission-critical industrial SCADA control and multi-campus multi-camera surveillance workloads, built-in dedicated hardware encryption secures all inter-branch VPN communications over public fiber, DSL, and cellular broadband circuits.

6. Standard Package Contents of C1169-12P

Separately Sold Optional Accessories

• Micro-USB rollover console cable for local CLI configuration
• 12V DC 240W external universal AC power supply (mandatory operating accessory for full 240W PoE functionality)
• 1G SFP fiber transceivers (SX/LX/T) for dual combo WAN fiber connectivity
• Cisco NIM-LTEA / NIM-5G pluggable cellular modules for modular primary/backup wireless WAN
• CAT4/CAT6 USB LTE cellular dongles for secondary auxiliary wireless backup WAN
• USB flash storage drives for log archiving and offline configuration backup
• CAT5e/CAT6 Ethernet patch cords for twelve Gigabit LAN and dual combo GE WAN connections
• RJ11 DSL telephone line cable for DSL WAN copper line connection
• ACS-1100-RM2 19-inch rack mount kit for wiring cabinet deployment

Software Licensing Information

• Permanent integrated security & crypto license included; no additional purchase required for IPsec, AES encryption, zone firewall, and NGIPS threat defense features
• All core routing, four-path dual-fiber/universal DSL/NIM-LTE/USB-LTE multi-media WAN failover, dual-standard DSL line diagnostic management, full 12-port PoE/PoE+ power management, QoS, native Cisco SD-WAN intelligent traffic steering, ZTP, and 12-port Gigabit managed switch features are fully included in the base IOS XE universal image; no extra paid feature licenses needed
• No wireless AP license applicable (WLAN radio hardware is omitted from this modular triple-media hybrid universal DSL-fiber high-density 12-port PoE base SKU; cellular connectivity requires separately purchased NIM cellular modules or USB LTE dongles)

Short Commercial Catalog Summary for Quotation