Cisco C899G-LTE-K9 Full Product Description

1. Short Overview

Suffix Breakdown

• C899: Flagship high-performance ISR G2 cellular router platform of the Cisco 890 Series
• G: Integrated multimode 4G LTE cellular modem with GPS location tracking and SMS remote alert functionality
• LTE: Embedded 4G LTE / DC-HSPA+ / UMTS / GSM multi-mode wireless WAN modem
• -K9: Permanent Cisco cryptographic license suite enabling AES-128/AES-192/256, 3DES, DES, SHA-1/SHA-2, IKEv1/IKEv2 full encryption with dedicated hardware crypto offload

Core Differentiators

1. vs wired-only C891F / C892FSP / C897VA series: Those models lack built-in cellular LTE modem; C899G-LTE-K9 provides native 4G wireless transport for primary connectivity or redundant backup for sites without fixed copper/fiber lines.
2. vs lower-tier C819G-LTE: C819G uses Fast Ethernet LAN, limited memory and lower throughput; C899G-LTE upgrades to full 8-port Gigabit PoE switching, 1 GB DRAM, combo SFP fiber slot, inline IPS, DMVPN and complete EIGRP/BGP enterprise routing stack.
3. vs DSL/G.SHDSL 896VA / 897VA / 898EA: Those models rely on copper leased-line/xDSL; C899G-LTE targets cellular wireless-first deployments with fiber fallback.
4. vs wireless WLAN C899GW-LTE-K9: C899G-LTE-K9 omits dual-band 802.11n WLAN radio; wireless variants add integrated access point for on-site mobile clients.
5. vs industrial hardened C819HG series: C899G-LTE is commercial indoor fanless desktop chassis with standard temperature range, not ruggedized for vehicle, railway or extreme outdoor shock/vibration environments.

2. Hardware Interface & Performance Specifications

Multi-Tier Redundant WAN Interfaces (Automatic Failover Supported)

1. Integrated Embedded 4G LTE 2.0 Multimode Cellular Modem
   Supports FDD/TDD LTE, DC-HSPA+, UMTS, EDGE, GPRS with region-specific cellular band support (NA, EMEA Global, Latin America, Japan variants). Features built-in GPS module for remote location tracking, SMS text alert notifications, mini-SIM 2FF slot with SIM lock security, dual external SMA antenna ports, theoretical peak throughput up to 100 Mbps down / 50 Mbps upCisco. Supports multi-APN, multi-bearer cellular QoS and Multi-VRF over LTE for segregated corporate/internet trafficCisco.
2. Combo GE/SFP Hot-Swappable Gigabit WAN Slot
   Dual-purpose shared port supporting either copper RJ45 Gigabit Ethernet or hot-pluggable GE SFP transceivers (SX/LX/ZX), serving as high-bandwidth fixed-line redundant backup when cellular LTE link fails.
3. Tertiary ISDN BRI S/T RJ45 Dial Backup Port
   Independent ISDN dial-up emergency connectivity triggered upon simultaneous failure of both LTE cellular and combo fiber/copper WAN links.

8-Port Full Gigabit Managed LAN Switch Interfaces

• Ports 1–4: IEEE 802.3af PoE capable (requires optional 125W high-power universal AC adapter to output 15.4W per port for IP surveillance cameras, VoIP phones and external wireless APs)
• Ports 5–8: Standard non-PoE Gigabit Ethernet
• Full enterprise switch feature set: 802.1Q VLAN tagging, port isolation, static MAC security, dedicated DMZ port assignment, broadcast storm control, SPAN port monitoring, LACP link aggregation, Smartport macros and per-port CoS traffic marking

Management & Auxiliary Ports

1. Separate dedicated RJ45 Console port: Independent local CLI configuration via rollover cable, physically separated from AUX port
2. Independent RJ45 AUX port: Standalone secondary serial port for extra out-of-band remote management access
3. Dual USB 2.0 Type-A host ports: External flash storage for log archiving, offline configuration backup and EEM script automation extensions
4. Hardware reset button, Kensington anti-theft lock slot for physical equipment protection
5. Onboard real-time clock (RTC) for accurate timestamping of logs, security certificates and network event triggers

Memory & Storage

• DRAM: 1 GB standard system memory to process dozens of concurrent IPsec VPN tunnels, dual-stack routing, inline IPS inspection, PoE LAN forwarding and high-volume cellular LTE traffic
• Flash storage: 256 MB onboard flash; factory preloadedc890-universalk9-mzAdvanced Security IOS image, minimum supported release 15.4(2)T

Front Panel LED Status Indicators

Physical & Power Parameters

• Form factor: Fanless all-metal compact desktop chassis, optional wall-mount bracket available
• Dimensions (H × W × D): 44 mm × 438 mm × 302 mm (1.75 × 17.25 × 12 inches) with anti-slip rubber feet
• Weight: ~2.6 kg (5.7 lbs) without power supply or cellular antennas
• Two official power supply options
  1. 60W universal AC adapter (for non-PoE deployments, 12 VDC output)
  2. 125W high-power universal AC adapter (mandatory if PoE LAN ports are utilized)
• Typical maximum power consumption: 27 W under full LTE cellular + combo SFP fiber + all 8 Gigabit PoE LAN ports full load
• Ingress protection: IP20, only suitable for dry indoor commercial office environments

Environmental Operating Specifications

• Operating temperature: 0°C ~ +40°C (32°F ~ 104°F); performance derates 1.5°C per 1000 m altitude above 3000 m
• Storage temperature: -20°C ~ +65°C (-4°F ~ 149°F)
• Relative humidity: 10%–85% RH non-condensing
• Maximum operating altitude: 3,000 m (10,000 ft)

3. Hardware Acceleration & Security Engine

• Dedicated onboard crypto co-processor fully offloads IPsec VPN encryption traffic and eliminates CPU bottlenecks under up to 50 concurrent site-to-site and remote access VPN tunnels
• Permanent K9 crypto license unlocks complete enterprise encryption stack: DES, 3DES, AES-128/192/256, SHA-1/SHA-2 hash algorithms, IKEv1/IKEv2 static site-to-site tunnels, Easy VPN remote access and DMVPN hub-spoke dynamic tunnels
• Integrated cellular traffic isolation filters to segregate wireless LTE transport and protect internal corporate LAN via independent VLAN segmentation; built-in SIM lock and cellular access control to prevent unauthorized cellular network access

4. Cisco IOS Advanced Security Feature Suite

Multi-Tier WAN Routing & Redundancy (4G LTE Cellular + Combo Fiber/GE + ISDN BRI)

• Cisco Express Forwarding (CEF), static routing, RIPv1/v2, OSPF, EIGRP, BGP, GRE/MGRE tunnel encapsulation, complete IPv4/IPv6 dual-stack support
• Automatic policy-based multi-layer failover logic between primary 4G LTE cellular wireless link and secondary combo SFP/GE fiber-copper backup link
• ISDN BRI tertiary dial backup triggered upon simultaneous failure of both cellular and fixed-line WAN uplinks
• Cellular LTE advanced features: Multi-APN, multi-bearer QoS, cellular Multi-VRF, GPS location reporting, SMS remote event alerts, SIM authentication lock, cellular data usage monitoring and traffic shapingCisco
• Policy-Based Routing (PBR), multi-NAT pools, PAT overload for logical segmentation of PoE-powered devices and standard wired LAN endpoints
• DHCP server/relay/client, DNS proxy, dynamic DNS, Ethernet OAM / 802.3ah for fiber/copper link health monitoring; dedicated LTE MIB extensions for cellular signal, data consumption and GPS telemetry

Unified Enterprise Security Suite

• Zone-Based Stateful Policy Firewall (ZBFW) for logical isolation of internal corporate LAN, PoE camera/VoIP subnet, DMZ and untrusted internet traffic zones
• Dynamic Multipoint VPN (DMVPN), Easy VPN Server & Client, IKEv2 IPsec encrypted inter-branch tunnels operable over LTE cellular, copper GE or SFP fiber transport
• Signature-based inline Intrusion Prevention System (IPS), Cisco ScanSafe cloud URL filtering, deep NBAR application control for HTTP, FTP, IM and mainstream business applications
• AAA authentication via TACACS+ / RADIUS, 802.1X port authentication available on all 8 Gigabit LAN switch ports
• Secure management only: SSHv2, HTTPS; plaintext Telnet disabled by factory default
• Granular access control lists (ACLs), static MAC address port lockdown on Gigabit switch ports, cellular firewall filtering to block malicious wireless inbound traffic

QoS & Cellular/Gigabit Bandwidth Optimization

• WFQ, CBWFQ, LLQ queuing mechanisms for low-latency prioritization of voice, video surveillance, SCADA and POS real-time payment traffic over metered cellular LTE links
• NBAR deep packet inspection to classify and prioritize business-critical workloads (remote video backhaul, cloud sync, industrial sensor data) over limited cellular bandwidth
• RTP/TCP header compression, cellular traffic shaping and policing to control metered LTE data consumption and avoid overage charges
• PoE QoS scheduling to guarantee stable power and bandwidth priority for critical IP cameras and VoIP handsets

Remote Management & Automation

• Zero-Touch Provisioning (ZTP) for mass standardized deployment of enterprise branches and ISP cellular managed CPE
• Cisco IOS Embedded Event Manager (EEM): Scriptable triggers for LTE signal loss, fiber link drop, PoE power faults and automatic ISDN dial backup activation with SMS/email alert notifications
• SNMP v2c/v3, remote syslog, IP SLA end-to-end link performance monitoring, dedicated MIBs for SFP fiber diagnostics, cellular LTE signal strength, GPS coordinates and SIM status telemetry
• Compatible with Cisco Configuration Professional (CCP) web GUI for simplified CLI-free deployment and daily monitoring of routing, security, PoE, fiber and cellular LTE subsystems
• GOLD non-disruptive onboard diagnostics for continuous remote hardware health checks of LTE modem, SFP fiber, copper Ethernet and PoE subsystems

5. Typical Deployment Scenarios

1. Off-Grid Retail Cellular Multi-Redundant Secure Gateway with PoE
   Built-in 4G LTE cellular acts as primary wireless broadband for remote retail locations without copper/fiber fixed lines; combo SFP fiber/GE copper serves as high-speed redundant backup when wired infrastructure is available. The 8-port Gigabit PoE LAN switch powers POS payment terminals, office PCs, VoIP phones and multi-camera surveillance arrays. Integrated GPS enables remote site location tracking, SMS alerts notify IT staff of WAN outages. VLAN segmentation separates sensitive payment infrastructure from staff corporate LAN and public internet threats. Persistent IPsec DMVPN tunnels transmit transaction and video data securely back to corporate headquarters, while zone firewall + inline IPS block external network intrusion risks over cellular wireless.
2. Mission-Critical Remote Industrial IoT Satellite Office
   Three-layer WAN redundancy (LTE cellular primary, fiber/GE secondary, ISDN BRI tertiary dial backup) meets strict enterprise business continuity requirements for unmanned industrial sites. Full Gigabit PoE switching eliminates separate power injectors for IP cameras and environmental SCADA sensors, with full EIGRP/BGP support for seamless integration into the corporate core routing domain. GPS location tracking provides real-time site positioning for remote asset management.
3. Service Provider Managed Cellular Business CPE
   Uniform hardware platform enables ISPs to deliver either 4G LTE wireless or SFP fiber/copper Metro Ethernet services to enterprise subscribers in rural areas without fixed-line coverage. Centralized ZTP mass deployment and remote SNMP/SMS monitoring support managed security, PoE and cellular wireless networking service packages.
4. Campus Remote Building PoE Surveillance Edge Router with Cellular Backup
   PoE ports connect multiple high-resolution IP cameras and access control hardware; combo SFP fiber uplink delivers high-throughput primary backhaul to the campus core network. Automatic LTE cellular failover ensures uninterrupted video and sensor data transmission during fiber outages, GPS provides location tracking for remote building equipment.
5. Mobile/Remote Teleworker Small Office Cellular VPN Gateway
   Deployed at remote employee residences without fixed broadband infrastructure, multimode 4G LTE delivers stable wireless primary transport for encrypted Easy VPN tunnels to corporate headquarters. PoE ports power home IP cameras and VoIP equipment, integrated security services defend all wired Gigabit endpoints against malware and unauthorized access over public cellular networks.

6. Standard Package Contents of C899G-LTE-K9

Separately Sold Optional Accessories

• RJ45 rollover console cable for local CLI configuration
• GE SFP fiber transceivers (SX/LX/ZX) for combo fiber WAN uplink
• ISDN BRI telephone line cord for dial backup
• 60W non-PoE AC power supply / 125W high-power PoE AC power supply
• Spare replacement universal AC power adapter
• Mini-SIM (2FF) USIM cards for cellular network registration
• USB flash drives for log archiving and offline configuration backup
• CAT5e/CAT6 Ethernet patch cords for LAN and copper GE WAN connections

Software Licensing Information

• The-K9suffix includes a permanent built-in cryptographic license; no extra purchase required for IPsec, AES encryption and secure management protocols
• All core routing, multi-layer LTE/fiber failover, cellular modem management, GPS/SMS alert functionality, PoE power control, firewall, inline IPS, QoS, ZTP and Gigabit managed switch features are fully included in the base Advanced Security IOS image; no additional paid feature licenses needed
• No wireless AP feature licenses apply (WLAN radio hardware is omitted from this cellular wired hybrid SKU)

Short Commercial Catalog Summary for Quotation